home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
daten
/
astrolog
/
helpfile.440
< prev
next >
Wrap
Text File
|
1995-08-11
|
308KB
|
5,463 lines
--
AAAAA SSSSS TTTTTTT RRRRRR OOOOO L OOOOO GGGGG
A A S S T R R O O L O O G G
A A S T R R O O L O O G
AAAAAAA SSSSS T RRRRRR O O L O O G GGGG
A A S T R R O O L O O G G
A A S S T R R O O L O O G G
A A SSSSS T R R OOOOO LLLLLLL OOOOO GGGGG
** VERSION 4.40 **
Helpfile for Astrolog version 4.40 (February 1995):
This file contains a complete list of all the features available
in Astrolog 4.40, and documentation on how to use each option. The
file is divided into seven sections:
1) A summary of all the main features which are accessed via command
line switches and parameters, along with the single key press
commands that can be given to an X Window or PC graphics screen to
change the display in various ways (assuming graphics are compiled
in) is listed.
2) The list of command switches and keys is repeated, but after each
option is given a full description of the details of the feature.
3) Details of default settings, in compile time options, and in the
default configuration file, are described, along with using Astrolog
files in general.
4) Descriptions of things that appear in Astrolog text displays are
described. This consists of describing how to enter chart information
into the program, and how to interpret what is seen in the standard
main display.
5) Next is a description of the different graphic chart displays and
how they are organized, and the X Windows features in general.
(Looking for a quick display to prove Astrolog was worth downloading
and/or compiling? With graphics try: "astrolog -Xn -XG"!)
6) Then are discussed the program's graphics features for PC's, how
to use them, the ways they are different from X Windows, and the best
way to use them if running under Microsoft Windows.
7) Finally is a section on compiling Astrolog if you have the source
code files, as opposed to an executable ready to run, as well as how
to compile and run Astrolog on the Macintosh.
--
IMPORTANT NOTICE: The graphics database and chart display routines
used in this program are Copyright (C) 1991-1995 by Walter D. Pullen
(astara@u.washington.edu). Permission is granted to freely use and
distribute these routines provided one doesn't sell, restrict, or
profit from them in any way. Modification is allowed provided these
notices remain with any altered or edited versions of the program.
The main planetary calculation routines used in this program have
been Copyrighted and the core of this program is basically a
conversion to C of the routines created by James Neely as listed in
Michael Erlewine's 'Manual of Computer Programming for Astrologers',
available from Matrix Software. The copyright gives us permission to
use the routines for personal use but not to sell them or profit from
them in any way.
The PostScript code within the core graphics routines are programmed
and Copyright (C) 1992-1993 by Brian D. Willoughby. Conditions are
identical to those above.
The extended accurate ephemeris databases and formulas are from the
calculation routines in the program "Placalc" and are programmed and
Copyright (C) 1989,1991,1993 by Astrodienst AG and Alois Treindl
The use of that source code is subject to regulations made by
Astrodienst Zurich, and the code is not in the public domain. This
copyright notice must not be changed or removed by any user of this
program.
************************
LIST OF COMMAND SWITCHES
************************
Astrolog (version 4.40) command switches:
-H: Display this help list.
-Hc: Display program credits and copyrights.
-HC: Display names of zodiac signs and houses.
-HO: Display available planets and other celestial objects.
-HA: Display available aspects, their angles, and present orbs.
-HF: Display names of astronomical constellations.
-HS: Display information about planets in the solar system.
-HI: Display meanings of signs, houses, planets, and aspects.
-He: Display all info tables together (-Hc-H-Y-HX-HC-HO-HA-HF-HS-HI).
-Q: Prompt for more command switches after display finished.
-Q0: Like -Q but prompt for additional switches on startup.
-M <1-48>: Run the specified command switch macro.
-M0 <1-48> <string>: Define the specified command switch macro.
-Y: Display help list of less commonly used command switches.
Switches which determine the type of chart to display:
-v: Display list of object positions (chosen by default).
-v0: Like -v but express velocities relative to average speed.
-w [<rows>]: Display chart in a graphic house wheel format.
-w0 [..]: Like -w but reverse order of objects in houses 4..9.
-g: Display aspect and midpoint grid among planets.
-g0: Like -g but flag aspect configurations (e.g. Yod's) too.
-g0: For comparison charts, show midpoints instead of aspects.
-ga: Like -g but indicate applying instead of difference orbs.
-gp: Like -g but generate parallel and contraparallel aspects.
-a: Display list of all aspects ordered by influence.
-a0: Like -a but display aspect summary too.
-a[0]a: Like -a but indicate applying and separating orbs.
-a[0]p: Like -a but do parallel and contraparallel aspects.
-m: Display all object midpoints in sorted zodiac order.
-m0: Like -m but display midpoint summary too.
-Z: Display planet locations with respect to the local horizon.
-Z0: Like -Z but express coordinates relative to polar center.
-Zd: Search day for object local rising and setting times.
-S: Display x,y,z coordinate positions of planets in space.
-j: Display astrological influences of each object in chart.
-j0: Like -j but include influences of each zodiac sign as well.
-L [<step>]: Display astro-graph locations of planetary angles.
-L0 [..]: Like -L but display list of latitude crossings too.
-K: Display a calendar for given month.
-Ky: Like -K but display a calendar for the entire year.
-d [<step>]: Print all aspects and changes occurring in a day.
-dm: Like -d but print all aspects for the entire month.
-dy: Like -d but print all aspects for the entire year.
-dY <years>: Like -d but search within a number of years.
-dp <month> <year>: Print aspects within progressed chart.
-dpy <year>: Like -dp but search for aspects within entire year.
-dpY <year> <years>: Like -dp but search within number of years.
-dp[y]n: Search for progressed aspects in current month/year.
-D: Like -d but display aspects by influence instead of time.
-E: Display planetary ephemeris for given month.
-Ey: Display planetary ephemeris for the entire year.
-EY <years>: Display planetary ephemeris for a number of years.
-e: Print all charts together (i.e. -v-w-g0-a-m-Z-S-j0-L0-K-d-D-E).
-t <month> <year>: Compute all transits to natal planets in month.
-tp <month> <year>: Compute progressions in month for chart.
-t[p]y: <year>: Compute transits/progressions for entire year.
-t[p]Y: <year> <years>: Compute transits for a number of years.
-t[py]n: Compute transits to natal planets for current time now.
-T <month> <day> <year>: Display transits ordered by influence.
-Tp <month> <day> <year>: Print progressions instead of transits.
-T[p]n: Display transits ordered by influence for current date.
-P [<parts>]: Display list of Arabic parts and their positions.
-P0 [<parts>]: Like -P but display formulas with terms reversed.
-P[z,n,f]: Order parts by position, name, or formula.
-I [<columns>]: Print interpretation of selected charts.
Switches which affect how the chart parameters are obtained:
-n: Compute chart for this exact moment using current time.
-n[d,m,y]: Compute chart for start of current day, month, year.
-z [<zone>]: Change the default time zone (for -d-E-t-q options).
-z0 [<offset>]: Change the default daylight time setting.
-zl <long> <lat>: Change the default longitude & latitude.
-zt <time>: Set only the time of current chart.
-zd <date>: Set only the day of current chart.
-zi <name> <place>: Set name and place strings of current chart.
-q <month> <date> <year> <time>: Compute chart with defaults.
-qd <month> <date> <year>: Compute chart for noon on date.
-qm <month> <year>: Compute chart for first of month.
-qy <year>: Compute chart for first day of year.
-qa <month> <date> <year> <time> <zone> <long> <lat>:
Compute chart automatically given specified data.
-qb <month> <date> <year> <time> <daylight> <zone> <long> <lat>:
Like -qa but takes additional parameter for daylight offset.
-qj <day>: Compute chart for time of specified Julian day.
-i <file>: Compute chart based on info in file.
-o <file> [..]: Write parameters of current chart to file.
-o0 <file> [..]: Like -o but output planet/house positions.
-os <file>, > <file>: Redirect output of text charts to file.
Switches which affect what information is used in a chart:
-R [<obj1> [<obj2> ..]]: Restrict specific bodies from displays.
-R0 [<obj1> ..]: Like -R but restrict everything first.
-R1 [<obj1> ..]: Like -R0 but unrestrict and show all objects.
-R[C,u,U]: Restrict all minor cusps, all uranians, or stars.
-RT[0,1,C,u,U] [..]: Restrict transiting planets in -t lists.
-RA [<asp1> ..]: Restrict aspects by giving them negative orbs.
-C: Include angular and non-angular house cusps in charts.
-u: Include transneptunian/uranian bodies in charts.
-U: Include locations of fixed background stars in charts.
-U[z,l,n,b]: Order by azimuth, altitude, name, or brightness.
-A <0-18>: Specify the number of aspects to use in charts.
-Ao <aspect> <orb>: Specify maximum orb for an aspect.
-Am <planet> <orb>: Specify maximum orb allowed to a planet.
-Ad <planet> <orb>: Specify orb addition given to a planet.
-Aa <aspect> <angle>: Change the actual angle of an aspect.
Switches which affect how a chart is computed:
-b: Use ephemeris files for more accurate location computations.
-b0: Like -b but display locations to the nearest second too.
-c <value>: Select a different default system of houses.
(0 = Placidus, 1 = Koch, 2 = Equal, 3 = Campanus, 4 = Meridian,
5 = Regiomontanus, 6 = Porphyry, 7 = Morinus, 8 = Topocentric,
9 = Equal (MC), 10 = Neo-Porphyry, 11 = Whole, 12 = None.)
-s [..]: Compute a sidereal instead of the normal tropical chart.
-sr: Compute right ascension locations relative to equator.
-s[z,h,d]: Display locations as in zodiac, hours/minutes, or degrees.
-h [<objnum>]: Compute positions centered on specified object.
-p <month> <day> <year>: Cast 2ndary progressed chart for date.
-p0 <month> <day> <year>: Cast solar arc chart for date.
-p[0]n: Cast progressed chart based on current date now.
-pd <days>: Set no. of days to progress / day (default 365.25).
-x <1-360>: Cast harmonic chart based on specified factor.
-1 [<objnum>]: Cast chart with specified object on Ascendant.
-2 [<objnum>]: Cast chart with specified object on Midheaven.
-3: Display objects in their zodiac decan positions.
-f: Display houses as sign positions (flip them).
-G: Compute houses based on geographic location only.
-F <objnum> <sign> <deg>: Force object's position to be value.
-+ [<days>]: Cast chart for specified no. of days in the future.
-- [<days>]: Cast chart for specified no. of days in the past.
-+[m,y] [<value>]: Cast chart for no. of months/years in future.
Switches for relationship and comparison charts:
-r <file1> <file2>: Compute a relationship synastry chart.
-rc <file1> <file2>: Compute a composite chart.
-rm <file1> <file2>: Compute a time space midpoint chart.
-r[c,m]0 <file1> <file2> <ratio1> <ratio2>: Weighted chart.
-rd <file1> <file2>: Print time span between files' dates.
-rb <file1> <file2>: Display biorhythm for file1 at time file2.
-r0 <file1> <file2>: Keep the charts separate in comparison.
-rp[0] <file1> <file2>: Like -r0 but do file1 progr. to file2.
-rt <file1> <file2>: Like -r0 but treat file2 as transiting.
-y <file>: Display current house transits for particular chart.
-y[b,d,p,t] <file>: Like -r0 but compare to current time now.
Switches to access graphics options:
-k: Display text charts using Ansi characters and color.
-V <25,43,50>: Start up with text mode set to number of rows.
-X: Create a graphics chart instead of displaying it as text.
-Xb: Create bitmap file instead of putting graphics on screen.
-Xb[n,c,v,a,b]: Set bitmap file output mode to X11 normal,
compacted, very compact, Ascii (bmtoa), or Windows bmp.
-Xp: Create PostScript stroke graphic instead of bitmap file.
-Xp0: Like -Xp but create complete instead of encapsulated file.
-XM[0]: Create Windows metafile stroke graphic instead of bitmap.
-Xo <file>: Write output bitmap or graphic to specified file.
-XB: Display X chart on root instead of in a separate window.
-Xm: Create monochrome graphic instead of one in color.
-Xr: Create chart graphic in reversed colors (white background).
-Xw <hor> [<ver>], _ge[..]: Change the size of chart graphic.
-Xs <100,200,300,400>: Change the size of map or characters by %.
-Xi: Create chart graphic in slightly modified form.
-Xt: Inhibit display of chart info at bottom of graphic.
-Xu: Inhibit display of a border around graphic.
-Xl: Inhibit labeling of object points in chart graphic.
-Xj: Don't clear screen between chart updates, drawing trails.
-X1 <object>: Rotate wheel charts so object is at left edge.
-X2 <object>: Rotate wheel charts so object is at top edge.
-Xd <name>, -di[..] <name>: Open X window on specified display.
-XW: Simply create an image of the world map.
-XW0: Like -XW but do a non-rectangular Mollewide projection.
-XG [<degrees>]: Display the image of the world as a globe.
-XP: Like -XG but create the globe from a polar projection.
-XF: Display maps as constellations on the celestial sphere.
-Xn [<mode>]: Start up chart or globe display in animation mode.
-HX: Display list of key press options for screen graphics.
--
Astrolog (version 4.40) obscure command switches:
-Y: Display this help list.
-Yn: Compute location of true instead of mean node.
-Yd: Display dates in D/M/Y instead of M/D/Y format.
-Yt: Display times in 24 hour instead of am/pm format.
-YC: Automatically ignore insignificant house cusp aspects.
-Y8: Clip text charts at the 80th column.
-YQ <rows>: Pause text scrolling after a page full has printed.
-Yo: Output chart info and position files in old style format.
-YP <-1,0,1>: Set how Arabic parts are computed for night charts.
-YE <obj> <semi-major axis> <eccentricity (3)> <inclination (3)>
<perihelion (3)> <ascending node (3)> <time offset (3)>
Change orbit of object to be the given elements.
-YR <obj1> <obj2> <flag1>..<flag2>: Set restrictions for object range.
-YRT <obj1> <obj2> <flag1>..<flag2>: Transit restrictions for range.
-YR0 <flag1> <flag2>: Set restrictions for sign, direction changes.
-YAo <asp1> <asp2> <orb1>..<orb2>: Set aspect orbs for range.
-YAm <obj1> <obj2> <orb1>..<orb2>: Set max planet orbs for range.
-YAd <obj1> <obj2> <orb1>..<orb2>: Set planet orb additions for range.
-Yj <obj1> <obj2> <inf1>..<inf2>: Set influences for object range.
-YjC <cusp1> <cusp2> <inf1>..<inf2>: Set influences for house cusps.
-YjA <asp1> <asp2> <inf1>..<inf2>: Set influences for aspect range.
-YjT <obj1> <obj2> <inf1>..<inf2>: Set transit influences for range.
-Yj0 <inf1> <inf2> <inf3> <inf4>: Set influences given to planets
in ruling sign, exalted sign, ruling house, exalted house.
-YI <obj> <string>: Customize interpretation for object.
-YIa <sign> <string>: Customize interpretation adjective for sign.
-YIv <sign> <string>: Customize interpretation verb for sign.
-YIC <house> <string>: Customize interpretation for house.
-YIA <asp> <string>: Customize interpretation for aspect.
-YIA0 <asp> <string>: Customize aspect interpretation statement.
-YkC <fir> <ear> <air> <wat>: Customize element colors.
-YkA <asp1> <asp2> <col1>..<col2>: Customize aspect colors.
-Yk0 <1..7> <1..7> <col1>..<col2>: Customize 'rainbow' colors.
-Yk <0..8> <0..8> <col1>..<col2>: Customize 'general' colors.
-YXG <0-2><0-2><0-2><0-3>: Select among different graphic glyphs
for Capricorn, Uranus, Pluto, and Lilith.
-YXg <cells>: Set number of cells for graphic aspect grid.
-YXf <val>: Set usage of actual system fonts in graphic file.
-YXp <-1,0,1>: Set paper orientation for PostScript files.
-YXp0 <hor> <ver>: Set paper size for PostScript files.
-YX <hi-res> <lo-res>: Set modes to use for PC screen graphics.
-;: Ignore rest of command line and treat it as a comment.
--
Astrolog graphics screen key press options (version 4.40):
Press 'H' or '?' to display this list of key options.
Press 'p' to toggle pause status on or off.
Press 'x' to toggle fg/bg colors on screen.
Press 'm' to toggle color/monochrome display on screen.
Press 'i' to toggle status of the minor chart modification.
Press 't' to toggle header info on current chart on screen.
Press 'b' to toggle drawing of a border around the chart.
Press 'l' to toggle labeling of object points in chart.
Press 'j' to toggle not clearing screen between chart updates.
Press 'v' to display current chart positions on text screen.
Press 'R', 'C', 'u', 'U' to toggle restriction status of minor
objects, minor house cusps, uranian planets, and stars.
Press 'c' to toggle relationship comparison chart mode.
Press 's', 'h', 'f', 'g' to toggle status of sidereal zodiac,
heliocentric charts, domal charts, and decan charts.
Press 'O' and 'o' to recall/store a previous chart from memory.
Press 'B' to dump current window contents to root background.
Press 'B' to resize chart display to full size of screen.
Press 'Q' to resize chart display to a square.
Press '<' and '>' to decrease/increase the scale size of the
glyphs and the size of world map.
Press '[' and ']' to decrease/increase tilt in globe display.
Press '+' and '-' to add/subtract a day from current chart.
Press 'n' to set chart information to current time now.
Press 'N' to toggle animation status on or off. Charts will
be updated to current status and globe will rotate.
Press '!'-'(' to begin updating current chart by adding times.
!: seconds, @: minutes, #: hours, $: days, %: months,
^: years, &: years*10, *: years*100, (: years*1000.
Press 'r' to reverse direction of time-lapse or animation.
Press '1'-'9' to set rate of animation to 'n' degrees, etc.
Press '1'-'9' to determine section of chart to show if clipped.
Press 'V','L','A','Z','S','J','K','E','W','G','P' to switch to
normal (-v), astro-graph (-L), grid (-g), local (-Z),
space (-S), dispositor (-j), calendar (-K), ephemeris
(-E), world map (-XW), globe (-XG), and polar (-XP) modes.
Press 'Y' to switch to biorhythm relation chart mode.
Press '0' to toggle between -Z,-Z0 & -XW,-XW0 & -E,-Ey modes.
Press 'F' to toggle between world and constellation map modes.
Press 'F1'..'F12' [plus Shift,Ctrl,Alt] to run macros 1..48.
Press 'space' to force redraw of current graphics display.
Press 'del' to clear the graphics screen and not redraw.
Press 'tab' to toggle between graphics resolutions.
Press 'enter' to input a command line of general switches.
Press 'q' to terminate graphics and the program.
Left mouse button: Draw line strokes on chart in window.
Middle mouse button: Print coordinates of pointer on world map.
Right mouse button: Terminate the window and program.
**********************************
DESCRIPTION OF EACH COMMAND SWITCH
**********************************
Astrolog allows command line switches to be invoked with either
the leading dash ("-") standard to Unix users, or a leading slash
("/") that PC users are more accustomed to. Not only that, but the
leading character is actually optional. For example, the command
"astrolog -i chartfile -R -u -U -Z -Xs 300 -Xi -XB" can be done as
"astrolog /i chartfile /r /u /U /Z /Xs 300", or can be abbreviated as
just "astrolog i chartfile R u U Z Xs 300 Xi XB". (This is subject to
a couple of minor limitations, in that one can't have the -1 or -3
option follow a -R restriction list of numbers, since the "-1" will
be considered a number.)
Many switches in their standard form are technically a "toggle"
instead of a "set" for the particular feature in question. For
example, "astrolog -v -g -g" will only result in the -v chart being
printed; an aspect grid won't, because the first -g turned it on
while the second -g turned it off again. This can be useful, in say
the -e everything switch. If you want all of Astrolog's charts except
the astro-graph, you can do "astrolog -e -L", where the -e turns
everything on and the -L turns the astro-graph chart, already on
because of -e, off. In another example, to get a chart with only the
stars in it, one can do "astrolog -R0 -RU", where the -R0 restricts
everything, and the -RU unrestricts all the stars. The various -X
switches which set a mode in graphics are also toggles - a
combination like "-Xr -Xr" which with one instance will just go into
reverse video mode, will remain out of it because the first -Xr put
you in and the second toggled you back out.
Command switch flags may actually be forced on or off regardless
of their current setting with special character prefixes. Many
switches (such as -s) represent on/off flags and their setting is
toggled when the switch is encountered. However this alone doesn't
allow one to force the setting to be a value, as we don't know if it
needs to be toggled or not. Prefixing any flag switch with '_' will
reset its state even if already off, while prefixing with '=' will
always make it on. For example, putting "_s" on a command line will
always set tropical zodiac, while "=s" will always set sidereal. The
standard '-' and '/' prefixes, along with no prefix at all, always
toggle the current setting. This is useful for configuration files
where we want to set various flags to particular values. There's one
more obscure switch prefix which is ':', which doesn't affect the
setting at all, but still affects any subsetting parameters. For
example, ":I 80" won't affect the interpretation setting at all, but
will still set the default screen width to 80 columns. This is
slightly simpler than the "-I 80 -I" double toggle hack that would
have to be done to do such a thing otherwise.
The various static help listings that may be generated, such as
the lists from -H, -HO, -HI, and so on, may be combined with each
other and even the actual charts. For convenience the program will
terminate right away and not prompt for chart info if the only thing
specified is one of the tables, e.g. just "-H" will print the help
list and exit, but "-H -i file -g" will print the help list followed
by an aspect grid chart.
In the command list below, greater than/less than symbols ('<'
and '>') are used to denote a command switch parameter to be replaced
by the appropriate value, brackets ('[' and ']') are used to denote
an optional parameter, and commas are used to separate either/or
choices. For example, the specification of the -I switch is "-I
[<columns>]", meaning that one can specify the -I switch, followed a
parameter for the number of screen columns, but that this extra
parameter is optional. The specification of the -Xs switch is "-Xs
<100,200,300,400>", meaning it can be used as either "-Xs 100", "-Xs
200", "-Xs 300", or "-Xs 400". An ellipsis ('..') generally refers to
a variable length list of values or an abbreviation for something
already indicated in related switches.
Correct parsing of strings is done on the command line (and in
files since they are technically command lines) in addition to when
the user is being prompted for data within the program. For example,
to do the natal chart for the alt.astrology newsgroup using the -qa
switch, one may enter the intuitive "-qa Jul 29 1991ad 6:23pm -10
151e13 33s52". The items may be entered in other standard and
simpler forms as well, such as just "-qa 7 29 1991 18.23 -10 -151.13
-33.52".
Any command switch that takes an index number as a parameter may
have it specified by its actual name instead of a hard to remember
value. For example, the switch sequence "-c 1 -R 6 -A 5 -F 7 10 0"
may also be entered as the more understandable "-c Koch -R Jupiter -A
Sextile -F Saturn Capricorn 0". Any string may be abbreviated to its
first three characters. Aspects should be based on their formal
abbreviations, e.g. "ssx" instead of "sem" for Semisextile.
(Presently only the first three characters are ever looked at, so
some star objects may still need to be specified as a number since
they have the same first three letters.)
--
Astrolog (version 4.40) command switches:
-H: Display this help list.
This option displays a list exactly like the one given above on the
screen. Note: Concerning the list itself, PC users are accustomed to
seeing command switches with a leading slash "/" instead of a dash
"-". To accommodate this, this list of options available does, if the
program has been compiled for a PC, display all the switches with a
leading "/" instead of a "-". (On Unix and other systems they will
be displayed with the standard leading "-".)
-Hc: Display program credits and copyrights.
This help switch displays a full page of credits, listing the names
of those who programmed Astrolog or parts of it, and important
copyright information and other legal items. Every time the program
is invoked, the -Hc switch is mentioned to use to see this info.
-HC: Display names of zodiac signs and houses.
The -HC switch will display a list of the 12 signs of the zodiac, and
the 12 houses, listing their standard and traditional names. This is
similar to switches like -HO or -HA below, in that it displays lists
of things (objects, aspects, or in this case the signs) that Astrolog
uses in its charts.
-HO: Display available planets and other celestial objects.
Similar to the -HA option below, the -HO option will list the planets
and other celestial objects used by the program, and their numbers as
recognized by the -R restrictions (mentioned later). This list will
also show the zodiac signs that planets rule, fall in, are exalted
in, and debilitated in. Stars are printed in the list along with
their azimuth, altitude, and brightness values. Note that this list
shows only those items that aren't restricted when its displayed; if
you want to show all 87 objects regardless of restriction status,
just use the -R1 switch to activate them all and combine it with -HO.
Concerning objects the program can do, Astrolog can do the position
of Lilith, often called the "Dark Moon". This Lilith is the point in
space of one focus of the Moon's elliptical orbit around the Earth
(Earth itself being in the other of the two), and not the asteroid or
hypothetical planet by the same name. Lilith is object number 17 in
Astrolog, and in graphics charts its glyph is a small circle with a
forward slash through it. If preferred, one can use the -YXG glyph
selection switch (described later) to choose the "European" version
of the glyph which is like the glyph for the Moon but smaller and
flipped horizontally.
Astrolog computes the position of Lilith as provided by the accurate
Placalc formula set. This means that the -b ephemeris switch (covered
later) needs to be in effect to get Lilith's positions. When the -b
setting is off, Astrolog will display the position of the South Node
for object 17 instead. We tweak the name of the object to be
"S.Node", change its rulerships and interpretation string
appropriately, and change the graphics glyph to be the standard
"upside down horseshoe" (a third glyph selectable via -YXG), although
we won't automatically update everything again if you toggle the -b
flag while the program is running.
Astrolog can do the position of the East Point as well, which is
technically the same as the position of the Ascendant at the equator
for whatever time. This is object number 20 in Astrolog, and its
graphics glyph is a simple "EP" abbreviation.
-HA: Display available aspects, their angles, and present orbs.
The -HA command switch gives a list of all 18 supported aspects,
their abbreviations as used in the aspect grids, their angles, and
their orbs. It will list the number of each aspect in addition to all
the other info (e.g. conjunct = 1, opposition = 2, etc.) so one can
see what number to pass to the -A switch when changing the number of
aspects used (see later). Finally, it will print a brief description
of what each aspect glyph looks like. This is in case one doesn't
know what aspects the weird symbols in the -g -X graphic displays are
referring to.
-HF: Display names of astronomical constellations.
This will display a text table of all the constellations, listing
their traditional names, their astronomical abbreviations as used in
the graphics above, their English meanings, and even their genitive
or possessive form (e.g. "Lyra" is the name of the constellation, but
the star Vega in it is called Alpha "Lyrae").
-HS: Display information about planets in the solar system.
This is a another static table which will display some astronomical
information about the main planets (and Earth's Moon) in a simple
form. For each planet is shown its distance from the Sun (or Earth)
in Astronomical Units (AU), its orbital period in Earth years, its
rotational period (i.e. day) in hours, its diameter relative to the
Earth (Earth being 1), its mass relative to the Earth (Earth being
1), its average density with respect to water (water being 1), the
tilt of its axis with respect to its orbit, and finally the number of
known moons or satellites it has.
-HI: Display meanings of signs, houses, planets, and aspects.
This will display the general meanings of each sign, each house, each
planet, and each aspect, on the screen. This shows more or less the
database the program uses to base its interpretations on (see the -I
switch setting for charts later).
-He: Display all info tables together (-Hc-H-Y-HX-HC-HO-HA-HF-HS-HI).
This switch will print out all ten of Astrolog's static table help
listings, like what -e does for actual charts. Specifically, this
will show the -Hc copyright screen, the -H switch list, the -Y
obscure switch list, the -HX graphics key press list, the -HC sign
and house list, the -HO object list, the -HA aspect list, the -HF
constellation list, the -HS planet information list, and the -HI core
interpretation list, for over 500 lines of informational output.
-Q: Prompt for more command switches after display finished.
Usually when Astrolog finishes printing the specified chart or
charts, or when we leave a graphics screen mode, the program will
terminate. However, sometimes one wants to display or work with lots
of charts or options, which would normally cause them to have to
invoke the program over and over again from their shell, using many
processes, and can be slow loading over and over from a slow disk.
Auto-termination is also bad when automatically starting up the
program in an X window or DOS box - once the program finishes, the
container will exit right away too, not allowing reading of the text
charts. The -Q switch causes the program to enter a looping mode
environment where (after the first chart is displayed) the user will
automatically be prompted to enter a new set of command switches
(using the no SWITCHES interface described later) which will be
processed. This will go on and the program will run until you enter
"." on a line for the switches to really terminate it.
Program errors which normally cause Astrolog to exit right away, will
(unless "fatal" errors) return the user back to this outer loop.
What's more is that being in the loop doesn't cause all the minor
program variables to be reset every time. The main things like what
info to use and what charts to display must be specified each time,
but minor modes (such as the present -x harmonic factor) won't, so
say specify -x 5 once, and you will be casting fifth harmonic charts
until you specify otherwise or exit the loop, not having to include
-x each time.
-Q0: Like -Q but prompt for additional switches on startup.
This is just like -Q above except that the user will first be
prompted for command switches right upon entering the program. Note
that these will be in addition to whatever else was on the command
line where the -Q0 itself was specified. This is mostly useful when
running on a Windows system (see later) where one can have -Q0 as a
default switch to pass to the program. Upon activation, the user will
be in a loop with Astrolog asking for switches right away before
proceeding to generate or prompt for any chart information.
-M <1-48>: Run the specified command switch macro.
-M0 <1-48> <string>: Define the specified command switch macro.
Astrolog has a feature to run "switch macros", or a whole command
line with one small switch. The -M switch takes one parameter, which
is the number of the macro to run. When encountered, the switches it
represents will be processed. This is similar to loading in a generic
command file with -i, except macros are limited to one command line.
Macros however don't require separate files, and may even call
command files themselves with -i.
The switch -M0 is the option that defines a macro. It takes two
parameters: the index of the macro to define, and a string
representing the command line to assign to it. (The command string
probably needs to be in quotes to ensure it's treated as one
parameter to -M0, instead of many items which will get processed
right away.) There are 48 macro slots available to define or run.
Macros may do anything and even call or define other macros. It's
possible to get in a infinite loop if you make a macro (or command
file) call or load itself; such cases aren't detected and will make
the program terminate with some unusual error.
Macros are very powerful and their uses are nearly endless. A bunch
can be defined in the astrolog.dat config file for your most common
switch sequences, hopefully preventing things such as batch files
that would have to be created otherwise. Suppose you often want to
see the transits of outer planets only to the house cusps in your
natal chart for the current month. The command line for this is "-i
yourchart -tn -RT0 6 7 8 9 10 -R0 -RC -C". You can assign this to the
tenth macro slot with: -M0 10 "-i yourchart -tn -RT0 jup sat ura nep
plu -R0 -RC -C". That line can be put in your astrolog.dat and you
can do this month's transits by just typing "astrolog -M 10". Here's
another example: Suppose you want a feature to bring up the chart of
the spouse of whoever's chart you are viewing at any time. You can
define a special macro, say in slot 5, in each of your chart info
files which does a -i on the file of their spouse, or does nothing if
they're unmarried. Now when in graphics mode, you can press 'F5'
anytime and Astrolog will bring up the spouse's chart! You could
define a bunch of macros to set various color sets or aspect orbs and
switch among them quickly using the function keys. You could even
make a simple chart database by having each chart file load the next
one in sequence in some macro, and then cycle through your charts by
running that macro in a -Q loop or from the graphics screen.
-Y: Display help list of less commonly used command switches.
This displays a list of available command switches, like the -H
option but showing only "less common" switches that would clutter
things up if they were in the main list, and are usually only
specified in configuration files. Hence almost all of those switches
begin with 'Y'.
--
Switches which determine the type of chart to display:
-v: Display list of object positions (chosen by default).
This is just a formal specification for the standard chart listing of
the planetary positions. One will get this chart by default if they
don't specify any other chart types, and they will get it along with
everything else in the -e option (see below). Although it isn't
necessary, it must be included if one wants this type of chart to be
displayed along with some of the other chart types described below.
-v0: Like -v but express velocities relative to average speed.
This switch is just like -v except that it modifies the planet
velocities fields slightly. (See later for a description of these
velocity fields.) The -v switch normally expresses velocity values
as an *absolute* quantity in degrees per day that the object appears
to have moved through the zodiac. This means that outer planets will
generally always have lower values, e.g. although a velocity of 0.010
degrees/day for fast moving Mercury means it's about to turn
retrograde, the same velocity value is normal for slow moving Pluto.
As it is useful to know when a planet is about to change direction,
the -v0 switch will divide the actual velocity values by how fast
each planet moves with respect to the Sun, meaning that all planets
will have an average *relative* velocity value of 1.000, and in all
cases, a velocity of 2.000 means the planet is moving twice as fast
as normal, and one of 0.010 means the planet is about to turn
retrograde.
Note: The -v0 switch which expresses planetary velocities relative to
average speed has a known incompatibility will cause some applying
vs. separating aspect orbs to be inverted, i.e. displayed as
applying when the reverse is true or vice versa. This affects app/sep
aspect grids and aspect lists (-ga, -ma, and -D charts, but not the
-T transit influence charts). This is because the velocities are used
to determine applying vs. separating to see if one planet is
overtaking another. The bug comes with the program thinking that, for
example, Pluto moving 2 times faster than normal, will soon overtake
Mars, slightly ahead of it in the zodiac, moving half normal speed.
When the values are expressed as absolute speed, it's apparent that
the outer planet Pluto always moves much slower than the more inner
planet Mars even when Mars is moving half normal speed. This problem
is at least not likely to come up much since only explicitly
combining -v0 with -ga, -ma, or -D will cause a problem.
-w [<rows>]: Display chart in a graphic house wheel format.
Display of the chart in a nice wheel format is supported using the
'-w' switch. (If one of the houses gets too 'full' of planets, the
planet will be put at the beginning of the next house.) The same
chart header information as is at the top of the standard -v chart is
printed in the middle of the wheel. In addition, the day of the week
that the date falls on, as well as the Julian day corresponding to
the date and time of the chart, is shown.
Note that this switch takes an optional parameter to specify the size
in text rows of each house printed. By default this is four, but one
may increase (realize this will make the chart require more than 24
lines to print) or decrease (don't know why you would want to, but
you can) this value to their preference. The parameter may range from
1 to 10, and with this you can nicely generate a text wheel chart
with all 87 objects in it, without overflowing all the houses.
-w0 [..]: Like -w but reverse order of objects in houses 4..9.
In the -w text wheel option, the objects in each house are printed
from top to bottom in order from earliest in the house to latest. This
looks good except for in houses 5..8 where this would appear backwards
(e.g. a planet having just entered the 6th house from the 5th would be
displayed right under the Descendant.) Therefore the objects from
houses 4 through 9 are reversed and printed in order from bottom to
top, making a more flowing looking wheel chart. If however, one always
wants each house to be filled from its top to bottom regardless of
which house, replace the -w with the -w0 switch
-g: Display aspect and midpoint grid among planets.
Aspects and midpoint display are supported: Invoke as astrolog -g and
a rectangular grid showing the midpoint locations for each planet,
and showing if any aspects are present and how accurate they are, is
displayed. The planets are labeled down the main diagonal of the
grid, with the aspects to the lower left and the midpoints in the
upper right. This is of course often used along with the -A*
switches. Both the aspect orbs and midpoints are displayed to the
nearest minute, and on the main diagonal (or edges if a relationship
aspect grid) is displayed the sign and degree of the planet in
question in addition to the planet name itself.
-g0: Like -g but flag aspect configurations (e.g. Yod's) too.
Search through the aspect grid for major aspect configurations,
including Grand Trines, T-Squares, Grand Crosses, Yod's, Cradles, and
Stelliums, with the -g0 option. (In a Stellium, three objects must all
be conjunct with each other.) This option will produce the same aspect
grid that -g displays, but afterwards will go through the grid and
list any of these aspect configurations and what objects are forming
them. (Of course, to see any Yod's, one has to -A 6 or more so that
Inconjuncts will be included in the aspect grid.)
-g0: For comparison charts, show midpoints instead of aspects.
For relationship aspect grids, the -g0 switch will display a midpoint
grid instead of an aspect grid between the planets in the two charts
e.g. "-r0 chart1 chart2 -g0". (See later for descriptions of the
relationship charts.)
-ga: Like -g but indicate applying instead of difference orbs.
Ability to determine whether an aspect is applying or separating (is
about to happen or just happened) is included in the -g option.
Normally the aspect orbs are flagged as being '+' or '-' based on
whether they are greater or less than the exact amount (e.g. a 91
degree Square has a +1 degree orb while a 89 degree one a -1 orb.) If
one, however, invokes the -g option as -ga instead, an orb printed as
'a' will indicate an applying aspect while an orb with 's' a
separating one. (To estimate applying vs. separating, the program
examines the planetary positions and their relative velocities at the
time in question.)
-gp: Like -g but generate parallel and contraparallel aspects.
Astrolog can do parallel and contraparallel aspects. Two planets are
parallel when they have the same declination with respect to the
equator, and are contraparallel when their declinations are the same
amount but on opposite sides of the equatorial plane. The -gp switch
will turn on the aspect grid just like the -g option, but will also
set it so the grid contains parallel and contraparallel instead of
normal aspects. This feature works for the -g aspect and relationship
aspect grids, and the graphics versions of them. The graphic glyph
for the parallel aspect is two vertical parallel lines, while the
glyph for contraparallel are two sets of two lines crossing each
other, like a tic-tac-toe grid. In -gp affected charts, the parallel
takes the place of conjunction, and contraparallel the place of
opposition; all aspect orb settings affecting conjunction and
opposition will affect the -gp aspects in the same way. (Note that
the best orb for parallel aspects is only a degree or so, hence the
default conjunction orb will likely be too high, and should be
decreased with the -Ao switch for -gp grids.) The -A and -RA aspect
selection switches will also affect -gp, but all aspects beyond the
first two are ignored as only the parallel and the contraparallel
aspect are considered.
-a: Display list of all aspects ordered by influence.
Aspects may be displayed in a nice ordered list, instead of only in
the -g aspect grid. Use the -a switch and get a list of every aspect
from the aspect grid printed out one per line. The order in which
they are printed is based on the total "power" in the aspect, i.e.
the influence of the two planets in question, the aspect in question,
and the orb. The same info and data from the -j influence charts (see
later) are used here, so changing any default influences there will
affect this ordering. The two planets are printed, the aspect they
make, their orb, and then the power of the aspect used in ordering.
Any power number more than 10 is a very major aspect. An exact Sun
Moon conjunction can exceed 25. So, if you want to know, say, if that
exact Mars Jupiter conjunction is more powerful than that wide Sun
Moon sextile, try a -a chart and find out what Astrolog's opinion is.
-a0: Like -a but display aspect summary too.
This is just like the -a aspect list ordered by influence chart,
except that summary information will be displayed afterward. The sum
of all the aspect powers and their average is printed, the total
number of aspects of each type is printed, and the total number of
aspects to each planet is printed.
-a[0]a: Like -a but indicate applying and separating orbs.
This is a shorthand way to bring up the -a or -a0 sorted aspect
chart, with the aspect orbs shown as applying or separating, instead
of positive or negative offsets to the exact aspect size. This is
like how -ga does the same thing with the -g aspect grid switch. (To
get the functionality of -aa without this, one can use the -ga switch
itself along with -a, and then include -g by itself again, e.g. "-a
-ga -g", to toggle the aspect grid back off but leave the applying
vs. separating setting on!)
-a[0]p: Like -a but do parallel and contraparallel aspects.
The -a aspect list can be made to list all parallel and
contraparallel aspects if invoked as -ap or -a0p, turning on the same
flag as the -gp switch above. When in effect, the parallel aspect
setting will also affect -D and -T transit influence charts, having
them show their aspects in parallel too.
-m: Display all object midpoints in sorted zodiac order.
True midpoint charts are supported in addition to the midpoints that
can be seen in the -g aspect grid. Use the -m switch and get a list
of all midpoints printed out sorted in zodiac order. This will show
both the actual midpoint location, as well as the angular difference
between the two objects displayed to the nearest minute. So if you
want to see, say, if any important midpoint is close to your Sun,
this is a much easier chart to use than scrutinizing the
midpoint/aspect grid.
-m0: Like -m but display midpoint summary too.
This is just like the -m midpoint list ordered by zodiac position
chart, except that summary information for it will be displayed
afterward. The average number of degrees spanned between each planet
pair is printed, and the total number of midpoints in each zodiac
sign is printed.
-Z: Display planet locations with respect to the local horizon.
The text display switch -Z prints out where each object is on the
local horizon in terms of altitude and azimuth. For each object, the
following is displayed: Its altitude on the local horizon from +90
degrees (straight up) to -90 degrees (straight down), and its azimuth
from 0..360 degrees, where 0 = due east, 90 = north, 180 = west, 270 =
south. To make visualizing the azimuth easier, an "azimuth vector"
with a N/S component and a W/E component is displayed, e.g. (1.00s
0.33w) means that the object is mainly south, with its true angle
being formed by an vector component west that's 1/3 the strength of
the south component, i.e. the object is about 18 degrees west of
south. This along with the altitude should make it easy to physically
point to where any planet is at any moment, making it easy to locate
planets in the night sky. This feature can also be used to determine
the times that a planet rises and sets. Also displayed are altitude
and azimuth differences between each object and the Sun and Moon,
first showing the number of degrees that the Sun/Moon is "ahead" (or
farther east in the zodiac) of the object in question, and then the
number of degrees that the Sun/Moon is above the object in question.
This feature can be used to roughly predict eclipses! Both the Sun and
Moon span about 0.5 degrees in the sky, therefore if both the azimuth
and altitude differences are < 0.5 (or 1.0 if the difference is
between the Sun and Moon themselves) then the object in question is
probably being occulted somewhat by the Sun/Moon. Note that there are
three types of planetary position displays: Right ascension and
declination showing the object's position with respect to the stars,
longitude and latitude showing where on the Earth the object is
straight up (as in the astro-graph zenith locations), and finally
azimuth and altitude showing the positions of the object relative to
the local horizon.
-Z0: Like -Z but express coordinates relative to polar center.
This will do a text chart just like the -Z local horizon switch above
except that it will print the location of each planet in prime
vertical coordinates, instead of altitude and azimuth. Prime vertical
coordinates are measured with its "azimuth" around the 360 degree
circle, with 0 degrees due east on the local horizon, going down with
90 degrees straight down, 180 degrees due west and so on; declination
"altitudes" are measured with positive values toward the north and
negative toward the south.
-Zd: Search day for object local rising and setting times.
One can display the rising and setting times of the Sun, Moon, and
planets with this feature. Specifically, when this switch is
included, the program will, for the entire day specified in the chart
information, display whenever a planet rises (specifically conjuncts
the local horizon while in the eastern hemisphere), sets (conjuncts
horizon in west), reaches its zenith point (or specifically conjuncts
the meridian while in the southern hemisphere, i.e. is due south from
the observer), and reaches its nadir point (conjuncts meridian in
north). Note that some stars may be high or low enough that they will
never rise or set, but instead will just "zenith" or "nadir" twice in
a day as they spin around the pole.
-S: Display x,y,z coordinate positions of planets in space.
Solar system space based charts are available with the -S switch,
which give the astronomical positions of each planet in terms of x, y,
and z coordinates. Although not directly useful astrologically, it
does give one a good view of how the planets actually were positioned
at the time in question. For example, normal astrology doesn't make
the distinction between the four different "forms" of say, a Mercury
Venus Conjunction, i.e. they can either be Conjunct on the near side
of the Sun, Conjunct on the far side of the Sun, or one can be on one
side and the other on the other side. When the chart is actually
displayed, for each body the following information is printed: The
relative angle of the planet with respect to the central body, i.e.
its zodiac position converted to the appropriate number from 0..360.
This is followed by the x, y, and z coordinate positions of the
object, in astronomical units from the central body. The x-axis
increases in the direction of 0 degrees Aries (tropical zodiac), the
y-axis increases in the direction of 0 degrees Cancer, and the z-axis
is with respect to the Earth's orbit (meaning that the Sun and Earth
always have a z-axis value of 0.0). Finally the overall length from
the central body in AU is printed, which is just the diagonal as
indicated by the x, y, z vectors. (The Earth and Sun are of course
always about 1.0 AU from each other.) The Moon circles the Earth and
isn't a part of the solar system proper; therefore, it is never in
these charts. The -e everything option will include this chart in its
listing of all the chart displays. (Note that the Earth doesn't have
a formal object index of its own. Hence there's no real way to
directly restrict it from these -S space charts either in text or
graphics format. Only the -R0 (and -R1) restrict everything switches
will affect this body, as they do all the others.)
-j: Display astrological influences of each object in chart.
Another chart type is available - interpretation of influences. This
is the simplest part of the general interpretation ability of the
program. What this part does is calculate the relative "power" of each
planet's placement, giving a general idea of the prominent areas of a
chart. When such a chart is printed, each planet is given a point
value, larger numbers indicating more strength. Each planet's strength
is divided between two fields: the positioning in and of itself, and
the power of the aspects it makes with the other planets. In addition
to each field, the total of these two areas is printed, as well as the
relative percentage of the planet in question with respect to all the
planets combined. Each planet gets a ranking for its positioning,
aspects, and total power as well, with the strongest getting #1, the
next strongest #2, etc. The -e option will include this chart along
with all the others as well in it's listing of all the chart displays.
To determine the strength of the positioning of a planet, various
things are taken into account: 1) The power of a planet in and of
itself, e.g. the Sun and Moon are more powerful then the other
planets. 2) The house placement of a planet, e.g. a planet in the 1st
house is more powerful than one in the 2nd. 3) Whether a planet is in
the sign it rules or is exalted in, e.g. Jupiter in Sag results in
more power to Jupiter. 4) Whether a planet is in the house
corresponding to the sign it rules or is exalted in, e.g. Jupiter in
the 9th house. 5) Planets get more power if the signs they rule are
occupied, e.g. a bunch of stuff in Aquarius gives more power to
Uranus. 6) Planets get more power if the houses they rule are
occupied, e.g. a bunch of stuff in the 11th house gives power to
Uranus. 7) Finally, planets get power according to what houses the
cusps of which fall in the signs they rule, i.e. the ruler of the
Ascendant (and to less extent the Midheaven, and so on) gets lots of
influence. Determining the strength of a planet's aspects is much
easier, and is basically composed of the sum of the strength of each
aspect the planet makes. Taken into account are: 1) The influence of
the planet being aspected to, e.g. Sun conjunct Jupiter gives more
influence to Jupiter than Mercury conjunct Jupiter would. The
planet's placement as described above plays a role, too, e.g. Venus
opposition Mars in Aries gives more influence to Venus that it would
be if Mars were in Taurus. 2) The influence of the aspect itself,
e.g. Oppositions are more powerful then Sextiles. 3) Finally the orb
of the aspect, i.e. exact aspects are more powerful than wide ones.
(The influence of the orb varies linearly from max power at exact to
zero power at the limit of the orb - sorry Maggie M. and Mark K. - no
complex aspect wave functions, at least for this version :)
Special thanks goes to Mark K. who initially presented this idea of
interpreting overall influences to me. I basically just took his
ideas, polished them a bit, and put it into the code. Interestingly,
while programming this feature, I had a dream about him, in which he
elaborated upon some of the ideas and even gave me suggestions for
some of the planets' default power values (astral visitation?) And,
while on the subject, I've had a couple of other Astrolog dreams; I
had one neat one while working on the -h feature (described later)
about a far distant future version of Astrolog that could actually
teleport one to the places which they cast charts for :)
-j0: Like -j but include influences of each zodiac sign as well.
The -j planet influences in a chart feature can be expanded to
include signs as well. Invoke it as -j0 instead of just -j, and in
addition to getting the influence of each planet in a chart, one will
get the influence of each sign in the chart as well. To determine
sign influence, we use the planet powers already determined; a sign
gets influence if: (1) There is a planet in it, (2) there is a planet
in the house it corresponds to, and (3) if any planet that rules or
co-rules it is in the chart. For example, with my 11th house Venus in
Sagittarius, for me: (1) Sagittarius gets more power because Venus is
in it, (2) Aquarius gets more power because Venus is in the 11th, and
(3) Libra and Taurus get power because Venus itself rules these
signs. The exact power given is based on the total influence of Venus
already determined. Any sign that has over about 175 points or 20% of
the total is a really powerful and a fundamental part of the psyche.
We also sum up the influences of all the signs (which will logically
total up to the sum of all the planets), and display the influence of
each element as well, and each mode as well, all this being perhaps a
more accurate version of the element table in the -v chart.
-L [<step>]: Display astro-graph locations of planetary angles.
The '-L' option will take the standard chart information and generate
the astro-graph positions of the planets. In other words, this does
the exact same thing that Jim Lewis' Astro*Carto*Graphy maps do. It
will display the longitude of where on the Earth at the time in
question each object was on the midheaven and on the nadir, and the
latitude of where the planets actually appeared at zenith. Also, for
latitude increments of 5 degrees, the longitude of where the objects
appeared on the ascendant and descendant is displayed. For text
screens, one can pass an optional parameter to this -L (or -L0) option
to change the default latitude step rate at which the Ascendant and
Descendant lines are computed. Again, this value is by default 5
degrees, although one can may increase or decrease it to any integer
(subject to the restriction that the number 160 is divisible by it.)
-L0 [..]: Like -L but display list of latitude crossings too.
Determination of latitude crossing points is included in the
astro-graph routines! The -L0 option will do the same thing as the -L
option, except that after displaying the longitude and latitude
locations of the Asc/Desc/MC/IC lines, it will then search among the
lines and display (in order from farthest North to farthest South) the
latitude of any points where lines cross each other. This includes the
curvy Asc/Desc lines crossing the straight MC/IC lines as well as
cases where different Asc/Desc lines cross themselves. And unlike Jim
Lewis' Astro*Carto*Graphy, Astrolog will also display the longitude of
the crossing (useful for Asc/Desc crossings) in addition to the
latitude (as well allowing more planetary bodies to be included in the
scan, and going farther North and South than Jim Lewis' printouts go.)
Note however, that there is presently a small (very rare) minor
omission glitch in the code, where if a crossing is within a couple of
degrees of 180 deg W/E, it may not be displayed.
-K: Display a calendar for given month.
The -K switch generates a simple calendar for the month specified in
the current chart. This is a standard type of chart generatable from
a date so the -e everything switch includes this -K chart along with
all the others. Note that this is technically a non-astrological
chart, but generic calendars are useful and easy to generate with all
of Astrolog's date determination features, so the option to create
them using Astrolog is included. The calendars are compact, with one
text row per week. The day specified in the current chart will be
highlighted in green assuming -k Ansi color is active, e.g. "-n -K"
will generate a chart for this month, with the number of today's date
highlighted.
-Ky: Like -K but display a calendar for the entire year.
The -Ky switch is just like -K except that it will generate a
calendar for the whole year. All twelve months will be displayed on
the screen, each just like the individual monthly calendars above but
printed in four rows of three months each.
-d [<step>]: Print all aspects and changes occurring in a day.
The -d option will take the standard chart information, and for the
day in question, display the exact times of all aspects that occur.
This is just like the aspects-per-day as displayed in Jim Maynard's
Celestial Guide books. (Displayed in local time as defined by the
default zone, with accuracy based on the searching divisions setting,
described below.) This will tell any time two planets make aspects
with each other, a planet changes its sign, or a planet goes
retrograde or direct. Both the -d (and -t listed later) options will
display the signs that any planets aspecting each other are in, in
addition to the aspect itself (e.g. instead of just "Jupiter Trine
Uranus", we have "Jupiter (Vir) Tri (Cap) Uranus". If a particular
object is going retrograde, then its sign will be displayed in
brackets instead of parentheses, and if an object is about to or has
just gone retrograde or direct, then its sign will be in <>'s.
This switch accepts an optional accuracy parameter, a value which
tells how many "segments" we should divide each day or whatever, when
doing these aspect searches. More segments is slower but can be more
accurate by a few minutes. This command line change of the step rate
can also be done for other charts such as the -t transit search by
using the switch toggle feature to turn -d off but still leave the
divisions value set, e.g. "-d 100 -d -t" will set the value to 100
but not actually display the -d chart. Or better yet just use the
colon switch prefix to not affect the -d setting at all, e.g. ":d 100
-t". In general, I suggest this value be set to 24 for Unix systems
and 8 for PC's, but it is easy to experiment to see what is best for
the speed of your computer. One may increase this value up to 2880
(if they don't mind the wait) which will mean a chart every 30
seconds for -d aspect in day charts and one every 15 minutes for -t
transit search charts.
-dm: Like -d but print all aspects for the entire month.
The -d option can search the entire month for aspects between planets
if one so desires. Specifying it as -dm instead of just -d will go
through the entire month instead of just the current day. (Combining
this one with -R allows searching for important aspects, sign
changes, etc.)
-dy: Like -d but print all aspects for the entire year.
The -d option can search the entire given year for events as well, if
it's specified as -dy instead of just -d or -dm.
-dY <years>: Like -d but search within a number of years.
The -d search may also do a range of years all at once. Invoke the
switch as -dY, and give a parameter indicating the number of years to
span, and it will be done, starting with the year in the current
chart. For example, to display the times of all New and Full moons
for the rest of the century (1995 through 2000), do "astrolog -n -dY
6 -R0 sun moo -A opp". (This is similar to the -EY and -tY features
which also allow doing a range of years in addition to a single year
or month.)
-dp <month> <year>: Print aspects within progressed chart.
Another progression feature allows determining aspect times of
progressed planets among themselves. The -dp <month> <year> switch
will, like the -d option, display times of aspects and sign changes,
for the time around the chart in question, except that they will be
progressed throughout the month specified. Progressed planets move
very slowly ("year for a day") so therefore there will usually be, if
any, only a couple of aspects in a given month. Also, since they move
so slow, the accuracy is cut down, so the dates given are probably
only accurate about to the nearest day, in spite of the times given
to the minute. Note that Astrolog can scan for aspects of: transiting
planets among themselves (-d switch), transiting planets to natal
planets (-T switch), progressed planets to natal planets (-Tp), and
progressed planets among themselves (-dp). Only thing Astrolog can't
directly do is do progressed planets to transiting planets, although
that may change in a future version :)
-dpy <year>: Like -dp but search for aspects within entire year.
Since progressed planets move so slow and only a few aspects in a
progressed chart will appear each month, one might want to instead
scan the whole year. To do this, use the -dpy switch, which takes
only one parameter for the year. This switch is consistent in format
to how with the -T and -E switches one specifies an entire year.
-dpY <year> <years>: Like -dp but search within number of years.
Related to above, the -dp option may also be done for a range of
years. Invoke the switch as -dpY, and pass in not only the year to
search within as with -dpy, but the number of years to scan from
then. For example, do display the times of all aspects within your
progressed chart for the next decade, do "astrolog -i yourchartfile
-dpY 1995 10".
-dp[y]n: Search for progressed aspects in current month/year.
The -dp progression event search option can be invoked as -dpn to
search the current month, or -dpyn to search the entire current year.
For example, if I want to search for the exact times of all aspects
in my natal chart, progressed to any time this month, I simply do "-i
mychartfile -dpn".
-D: Like -d but display aspects by influence instead of time.
This switch will display a chart listing all aspects in effect within
the chart in question, in order by influence based on their power
when transiting. This chart focuses upon and gives precedence to
aspects of outer planets with each other, as opposed to common inner
planet configurations. For example, at the time in early January
1994 the most influential aspects in effect were the Uranus Neptune
conjunction and the Saturn Pluto square. This chart is very much like
the format of the -m0 aspect list chart, except that we are using the
transit as opposed to natal influences of the planets. The -m0 chart
is most appropriate for a person's natal chart, in that the inner
planets are focused upon, such as a Sun Moon square will be near the
top of the list. This -D chart is more appropriate for times as
opposed to people, since it focuses upon rare outer planet
configurations. This chart is also very similar to the -T transit
influence chart, in that it shows the aspect, applying or separating
orb, and power of the event with its present orb, except that this
does influences of transiting planets among themselves as opposed to
aspects to a natal chart. If you want to see what major events are
coming up, and don't want things such as Uranus Neptune conjunctions
to "sneak by", use this chart and watch the configuration gradually
rise to the top of the list as its orb narrows over time. This chart
may be combined with others and is included in the -e everything switch.
-E: Display planetary ephemeris for given month.
The -E option will generate a quick ephemeris of the planet positions
each day for the month indicated in the given chart, as taken from
the standard interface. This is useful if you just want to see an
overview of what's happening some month in the sky. Any dots after a
planet location in the list indicate the planet was retrograde at the
time that day. For example, to see the ephemeris for someone's birth
month, one can do the convenient "-i chartfile -E", or to see the
ephemeris for this month, do "-n -E" (see -i and -n options later).
Note: The ephemeris listings obtain the time (and time zone) to cast
each day's chart for (e.g. noon, midnight) from the chart information
given it, instead of always defaulting to something like midnight in
the default time zone. This is a bit more flexible since one may want
to specify a noon or 6:00am or whatever ephemeris which wouldn't be
possible otherwise. The -qm <month> <year> switch (see later) always
uses midnight for the time and the default for the time zone, so when
using this switch with -E, the results will be a midnight ephemeris
in this default zone. However, something like -i yourchart -E to do
an ephemeris for your birth month will display the positions each day
at your birthtime instead of at midnight.
-Ey: Display planetary ephemeris for the entire year.
To display an ephemeris for all twelve months in an entire year,
invoke the -E switch as -Ey. For example, to get an ephemeris for
all of last year, one can do "-qy 1992 -Ey" (see -qy and -qm options
below).
-EY <years>: Display planetary ephemeris for a number of years.
The -E ephemeris list feature may also do an ephemeris for a range of
years all at once. Invoke the switch as -EY, and pass a parameter
indicating the number of years to span with the ephemeris, and it
will be done, starting with the year in the current chart. For
example, to do an ephemeris for all this century from 1900 through
1999, do "astrolog -qy 1900 -EY 100".
-e: Print all charts together (i.e. -v-w-g0-a-m-Z-S-j0-L0-K-d-D-E).
There are thirteen main different formats of chart display available:
The standard listing of planet positions which you get without any
switches or with the -v option, the house wheel you get with -w, the
aspect/midpoint grid you get with -g, and the charts generated with
the -a, -m, -Z, -S, -j, -L, -K, -d, -D, and -E switches. The -e
"everything" option will display the chart in all thirteen of these
formats for about 1200 lines and 75K bytes of text! Note that one can
even include the -t and/or -T transit options below and include yet a
couple more chart formats in the list (however transits require a
time parameter to do transits for so they aren't really a single
chart display and hence aren't included in -e by default).
-t <month> <year>: Compute all transits to natal planets in month.
The '-t <month> <year>' option will scan the entire month specified,
and print out any transits that happen, in that month, to the planet
positions as listed in the current chart, as taken from the standard
interface. There will be quite a few, even though fast moving objects
like the Moon aren't looked at by default (unless specified in the
default parameter file or with the -RT switch), so you might want to
use this with the -R option to limit this to just certain planets.
(The times are displayed in the local time zone, and are generally
accurate to within a half hour or so; Try doing it for your birth
month and your own chart - All planets should conjunct their natal
positions at about the time of your birth.) To determine transits to
natal house cusps other than the Asc and MC, i.e. when does a planet
change house in your natal chart, include the -C switch described
later. See the -RT option, as well as the "smart cusps" default,
described later, for options which directly affect this feature.
-tp <month> <year>: Compute progressions in month for chart.
Determining dates of transits of progressed planets to natal planets
can be done with the -tp <month> <year> option. This is just like the
-t option, except that the exact aspects of progressed planets
(rather than transiting planets) to the planets in the chart are
displayed. Progressions occur much less often than transits, and
there will only be a few, if any, in a given month, so one might to
invoke this as -Tpy, as described below.
-t[p]y: <year>: Compute transits/progressions for entire year.
To display transits for an entire year, invoke the -t switch as -ty
(-tpy for progressions), which only takes one parameter, the year.
For example, "-i chartfile -ty 1995".
-t[p]Y: <year> <years>: Compute transits for a number of years.
One may also search an arbitrary number of years at once for
transits. One uses the -tY <year> <years> switch like the -ty <year>
switch above, except that -tY takes an extra parameter for how many
years to search. For example, -tY 1995 10 will search the ten years
from 1995 through 2004 for whatever transits. With a negative value
for the years to scan, it will start that many years before the given
year, e.g. -tY 1994 -10000 will scan the previous 100 centuries for
transits, starting with 8005 B.C.! Note that this switch may also be
invoked as "-tYn <years>", in which case it will start from the
current year and be an equivalent shorthand to "-tY 1995 <years>" for
this year at least.
-t[py]n: Compute transits to natal planets for current time now.
This feature is a quick shorthand way to generate transits for the
current month. For example, instead of "astrolog -i chartfile -t 1
1995", one can do "astrolog -i chartfile -tn". To do transits for the
entire current year, invoke it as "-tyn".
-T <month> <day> <year>: Display transits ordered by influence.
The -T switch is a transit influence chart. Given a date, it will
take the transiting planets on that date, and determine how they
interact with the generic natal chart specified with -i or however.
The information will be printed as a list of transits, sorted in
order from most significant to least significant. For each transit in
effect, the transiting and natal planets (and the signs they are in)
are displayed, along with the aspect and the orb, and whether the
transit is applying and going to happen in the future, or just passed
exactness and the orb is separating. The computer computed power
value of each transit will be printed too - anything over 100 is a
very major transit. Any transit that's a return, i.e. a transiting
planet conjuncting the same one in the natal chart, will be flagged
with a capital "R" at the end of the line.
The things which affect how Astrolog computes the influence of a
transit are: The power of the object that's doing the transit, e.g.
transiting Pluto conjunct your natal Ascendant is much more powerful
than the transiting Moon conjunct your Ascendant. The power of the
object being transited affects the power too (but not as much as the
transiter) e.g. Jupiter transiting your Sun is more powerful than
Jupiter transiting an asteroid. Finally, the orb plays a role as
well, in that a transit that will be exact in a couple of days from
the given date passed to -y is more powerful than one won't be exact
for another month. Note that the power of a planet when transiting is
different than its influence in the natal chart: Although Sun
conjunct Moon is more powerful in a natal chart than Saturn conjunct
Moon, when transiting, Saturn transiting Moon is much more
influential than Sun transiting Moon. Hence there are two lists of
object influence values in the astrolog.dat file (described later)
that can be customized. There's the generic list of standard
influences (which have items like Sun, Moon, and Ascendant most
powerful), and a parallel list of transit influences (which have the
slower moving bodies the most powerful).
This switch is in compliment to the -t transit search list, and you
may find this one more useful. The -t chart prints the times when
a transit is exact, which is useful to know, but doesn't really help
when you want to know when a transit enters orb enough to be
significant, and it won't flag a major year long transit that will be
exact next month, listing it among a bunch of less significant
aspects for the following month. With -T, you can see a major transit
first enter orb at the bottom of the list, and then slowly rise to
the top as it becomes more exact through the days. And you can answer
the question as to which is more influential: say an exact transit of
Mars to a minor house cusp, or a major transit of Saturn to an angle
that's still a month away from exactness.
Also notice the resemblance between -T and the -r0 -m0 combination.
Both display aspects ordered by influence. In fact, "-i chart -Tn"
will look almost identical to "-y chart -m0", except that -T is
designed and formated for doing transits to a particular chart.
(Doing -T will always use applying vs. separating orbs, generate
powers using the transit influences, and allow the transiting and
natal planets to be restricted separately with -RT and -R.) Astrolog
allows transit charts to be done between transiting planets and natal
planets, as well as charts among transiting planets to themselves,
both of which can be expressed as searches for exact times, or
displays of influences of each aspect at a particular time, as
summarized in the following organized list:
o -t switch: Display exact times of transits to natal planets.
o -T switch: Display influences of transits to natal planets.
o -d switch: Display exact times of aspects among transiting planets.
o -D switch: Display influences of aspects among transiting planets.
-Tp <month> <day> <year>: Print progressions instead of transits.
The -T transit influence switch can also (like the -t transit search)
display all aspects between progressed planets and natal planets in
influence order, if it's invoked as -Tp instead of just -T. This
works like -T in every way except that a switch combination like "-i
mychart -Tp 1 31 1995" will display aspects between my natal planets,
and those in my natal chart progressed to the end of the month, and
their influence and orbs at that time, instead of between my natal
planets and the actual positions of the planets at the end of January.
-T[p]n: Display transits ordered by influence for current date.
The -Tn switch is a shorthand way to pass the current date today and
time now to the -T switch. If you want to see what transits are most
affecting your natal chart presently, just do "-i yourchart -Tn".
-P [<parts>]: Display list of Arabic parts and their positions.
Astrolog has the ability to display the positions of 177 Arabic
parts! The "ARABIC" compile time option in astrolog.h may be
commented to leave this feature out if you don't want it. Display a
chart with the -P switch to show each part and its position, one per
line for the chart in question. The listing contains five columns:
First is the full name of the part, i.e. the part of whatever. Second
is its position in the zodiac (which will be shown to the nearest arc
second when the -b0 setting is active). Third is the house the
location falls in.
Fourth is the formula used to compute the part, given so one knows
what the program is doing and to aid in interpretation. The formula
is expressed in the form <term1> - <term2> + <term3>. Also included
is a flag indicating whether the formula should be flipped for night
births, i.e. charts where the Sun is below the horizon in houses 1
through 6. For night charts where the flip status is "Y", the real
calculation done is <term1> + <term2> - <term3>. Each <term> consists
of an "object" plus a "modifier". The object is usually given as the
abbreviation of a planet, or it may be a number from 1 to 12
indicating that house cusp. The object may also be "For" or "Spi"
meaning it's the position of the Part of Fortune or Part of Spirit,
or it may reference an actual degree in the zodiac. The modifier
indicates how to get the actual position of the term from the object.
It's usually blank meaning the term is just the position of the
object. It may be "H", meaning the term is the location of the house
the given object is in; it may also be "R", meaning the term is the
location of the planet ruling the house the given object is in; it
may be "D", meaning the term is the location of the planet that's the
dispositor of the given object, i.e. ruler of its position; or it may
be "&", meaning the term is 10 degrees beyond the position of the
given object.
The last column is the "type" of Arabic part. Most parts are normal
psychological indicators like the Part of Fortune, and don't have
anything listed here. Seven parts reference elements and weather and
are used for charts cast at the time of equinoxes, solstices, and New
and Full moons, and are indicated by "Evnt". 21 parts reference crops
and are parts used in the commodities market for prognostication, and
are indicated by "Comm". Finally 16 parts are specially used for
Horary questions and are indicated by "Hora".
The -P switch accepts an optional parameter to indicate how many of
the Arabic parts to show. When given, only the first 'n' parts will
be displayed. As the special part types are shown after all the
standard ones, this may be used to restrict parts you don't care
about. For example, "-P 161" will leave off the horary parts, "-P
140" will leave off the horary and crop parts, and "-P 133" will
leave off the horary, crop, and event parts. Related to this,
standard -R object restrictions will affect the parts shown; if a
planet is restricted, than any parts referencing it in its formula
will be left out.
-P0 [<parts>]: Like -P but display formulas with terms reversed.
If the -P switch is invoked as -P0 (or -Pz0, etc) the output will be
identical to before, except that the formula column will exchange the
positions of the second and third terms, i.e. instead of showing as
<term1> - <term2> + <term3>, -P0 will show <term1> + <term3> -
<term2>. This isn't too useful in itself, unless combined with -Pf
below, where -Pf and -Pf0 sort differently giving different terms
priority. Here's how to conceptualize formulas: if the planets were
rotated through the zodiac so that object2 is at the position of
object1, then the new position of object3 is the part. For example,
with the Part of Fortune being Asc - Sun + Moo, if you rotate your
chart so that the Sun is on the Asc, then the Moon's position is the
POF, Mercury's position is the Part of Commerce, its formula being
Asc - Sun + Mer, and so on. The default -Pf sorting allows one to
easily see, if one rotates this planet on the Asc, what parts
indicate the positions of the other planets. The -Pf0 ordering allows
one to easily see, where is the position of a particular planet,
after all rotations where some other planet is on the Asc.
-P[z,n,f]: Order parts by position, name, or formula.
As with the fixed stars, the Arabic part listing may also be sorted
in various useful orders. Invoke the -P switch as -Pz and they will
be displayed in order of position, with parts in Aries first and
Pisces last. Invoke it as -Pn and the parts will be sorted by name,
with the part of Accomplishment first and Worldliness last. Finally,
invoke it as -Pf and they will be ordered by formula, where the
ordering reflects the contents of each term, with Ascendant and early
planet terms first, and cusp and other special ones last. Note that
regardless of the ordering, passing a value to -P will still leave
off the same parts as in the standard display. Especially with -Pz
and -Pf, notice that several parts may have the same position. Some
formulas differ only in their night flip flag, meaning they will be
the same for day charts, while a few parts of different category
types can even have the same formula period.
-I [<columns>]: Print interpretation of selected charts.
The -I display an interpretation option is a powerful, expansive
feature to generate interpretations of many of Astrolog's charts.
Simply include the -I switch to get an interpretation of any
particular type of chart that the program would display otherwise.
If Astrolog doesn't support interpretations for it, the normal chart
will be shown instead.
For example, A brief interpretation of the meaning of the positioning
of each planet in its sign and house is supported when the -I switch
is invoked with -v (or by itself since -v is the default). If one
does this, then instead of the standard -v listing of planet
positions, the positions will be listed with a brief interpretation
of what they mean. I have to say that this is a pretty limited
version of interpretation, being nothing more than a combining of
phrases representing the planet, sign, and house in question;
nevertheless, people who don't know how to interpret charts might
find this to be of use (or at least amusing. :)
Another common interpretation one would want is the ability to give a
brief interpretation of each aspect in the aspect grid. When the -I
switch is combined with -g, the standard -g aspect grid will be
replaced with a list of each aspect occurring and a brief listing of
what it means. Again, this is mainly just a lookup of the general
meanings of each planet and the aspect in question, but still might
be found of interest by some. (Note: only the first 11 aspects, out
to the Bi-Quintile, can be considered.)
Synastry relationship charts may be interpreted too, with the -r -I
combination. Actually, they could be technically interpreted without
any special code, since the output of a synastry chart is a technical
"chart" with planet and house positions, but it would just be an
interpretation of Person2's planets in Person1's houses as if that
were a natal chart. This interpretation feature recognizes charts
generated with -r as synastry charts and interprets them
appropriately. For each of Person2's planets, the interpretation of
how and where it affects Person1 is displayed.
Eight more interpretations just as useful can be done: "-r0 person1
person2 -g -I" is a legal combination, and will display meanings of
aspects between planets in two charts in a relationship aspect grid.
"-i person -m0 -I" is legal, and will display the meanings of aspects
in a chart; this is like -g -I, but the aspect meanings are printed
in sorted order based on how powerful Astrolog thinks each aspect is,
so this is probably more useful. "-r0 person1 person2 -m0 -I" is legal,
and will display the meanings of aspects in a relationship aspect
list, like -r0 -g -I, but in the improved sorted order. "-d -I" is
legal, and will display the meanings of aspects among transiting
planets occurring during a day, as well as of sign and direction
changes. "-T -I" is legal, and will display the meanings of aspects
from transiting planets to natal ones. "-y -I" is also legal, and
will display the transit interpretations in sorted order by
influence. Finally, "-m -I" is a legal combination, which will do an
interpretation of a midpoint chart, printing each midpoint in the
same order as without the -I, but with each midpoint as an
interpretation sentence instead. Relationship midpoint charts may be
interpreted in the same manner using the "-r0 person1 person2 -m -I"
combination.
This interpretation toggle switch accepts an optional parameter to
specify the number of screen columns in which to format the
interpretation paragraphs, i.e. what column to break lines at when
formatting and printing. One may change this from the default of 80
to accommodate narrower or wider screens or printers.
--
Switches which affect how the chart parameters are obtained:
-n: Compute chart for this exact moment using current time.
For those with systems who can handle time calls (If your system
pukes on trying to compile them, simply comment out the #define TIME
line at the beginning), the program supports displaying the chart for
the time at the current moment! In other words, invoke as astrolog -n
and see where the planets are right now. (This is fun - the house
cusps change 1 minute about every 4 seconds!) You will need to change
the #defines for the default longitude and latitude in astrolog.h, or
else specify where you are explicitly by using the -l switch to
change the default location. To figure out the time zone, the program
uses the default value in the astrolog.dat file or as defined in the
DEFAULT_ZONE constant set at compile time.
Note that the default time zone setting or passing values to -z,
won't affect the positions of the planets, as expected since they are
where they are "now" no matter how time is expressed. The default
zone is merely used to determine what to express the local time to
when displaying the current time. It is important however to realize
that the time zone setting on your system can affect the actual raw
time the program gets internally for "now". If the -n switch seems to
always generate times an hour or more off to what you have your time
zone set to, it's likely that your time zone environment variable is
uninitialized or set incorrectly. You will need to set the "TZ"
environment variable, setting it to a value such as "xxxnyyy", where
'n' is the hours your zone is before GMT, 'xxx' is a three character
string indicating the abbreviation of the zone (required, but doesn't
need to be set to anything more than 'xxx' if you prefer) and 'yyy'
is the abbreviation for the zone when/if ever in Daylight Time. For
example, if running Astrolog on a PC in Eastern Time, put the line
"set TZ=EST5EDT" in your AUTOEXEC.BAT file.
-n[d,m,y]: Compute chart for start of current day, month, year.
These switches are like the -n generate chart for current moment now
feature, except that they will respectively generate charts for the
midnight on the current day, midnight on the first of the current
month, and midnight on the first day of the current year.
-z [<zone>]: Change the default time zone (for -d-E-t-q options).
The -z <value> option can be used to change the default time zone to
the value in question. For example, you can force the -E ephemeris
and -t transit lists to be displayed at midnight GMT time instead of
the local time with "-z 0". If Daylight time is in effect, you should
set the separate Daylight time default below. Note that one can
technically get by without changing the Daylight setting, by
subtracting one from the time zone itself, e.g. for EST where the
time zone is "5", you can do "-z 4" or "-z EDT" during Daylight time
to properly display transits, aspects in day, and other lists in the
local DST zone.
Normally the -z switch takes an argument which will then become the
default time zone. If one, however, invokes it by itself, it will
subtract one hour from whatever the default time zone presently is.
This is useful since it is equivalent to adjusting any times printed
to Daylight time, i.e. it will add one hour to any times displayed.
Again, this is archaic as it's better to just use the -z0 switch
below. Without the -z0 setting, when entering the birth time for
charts, one would have to subtract one hour if Daylight time were in
effect, or subtract one hour from the time zone which will do the
same thing. For example, over here on the West Coast, I have my
default time zone compiled to be "8"; when Daylight time is in effect
here, I can do -z 7 or just -z to decrease the default time zone when
I make say a -t transit list, which will in effect add one hour to
the local times displayed, or in effect "Spring ahead" the clock for
me. (For a better way of adjusting Astrolog for Daylight time without
having to specify -z all the time, recompile the program, or add one
hour to times in your head, use the "defaults" file described later
to edit the default time zone or the Daylight setting.) Remember that
the -z (and -zl) switches should be before any other switches they
modify (such as -n) in order for the new default to take effect.
-z0 [<offset>]: Change the default daylight time setting.
This switch sets the contents of the default Daylight time setting,
and sets the value in the current chart as well, taking one optional
parameter. When present the parameter will be used for the Daylight
hour offset, which will almost always be 0 or 1, but can technically
be set to something else for Daylight offsets that "Spring ahead"
amounts other than one hour. When omitted, the -z0 switch will toggle
the Daylight setting on and off between 1 and 0.
-zl <long> <lat>: Change the default longitude & latitude.
Similar to the -z switch, the -zl option can be used to change the
default compile time world coordinates used in certain options, such
as the -n cast chart for right now switch. Note that both the -zl
default longitude and latitude, and the -z default zone switches
affect the time and location of the current chart in memory in
addition to the default setting. Confusion could result otherwise if
changing a default after chart info was already obtained, e.g. "-z
-n" would be different from "-n -z", where the latter wouldn't change
the zone for the chart because it was seen after the -n was processed
and the old zone used. The correct thing will happen regardless of
ordering. This means you can easily do a relocated chart with this
-zl switch, e.g. "-i yourchart -zl 122W20 47N36" will cast your chart
relocated to Seattle.
-zt <time>: Set only the time of current chart.
This simple switch will set the time and only the time of the current
chart in memory to the given value. For example, to cast a chart for
3:00pm today, do "-n -zt 3:00pm". Without this one would have to cast
a whole new chart using the -q switch and respecify the month, day,
and year. Note that placement of this switch is important, as any
other switch after it which also sets a time will clobber the
setting, e.g. "-zt 3:00pm -i chartfile" will be the same as just "-i
chartfile" because the file has its own time value.
-zd <date>: Set only the day of current chart.
This is just like the -zt switch above except that it takes one
parameter for and sets the day of the current chart. For example, to
see the aspects taking place on the 15th of the current month, do "-n
-zd 15 -d", which does the chart for the current month and year but
the day scanned is the 15th instead of the current day.
-zi <name> <place>: Set name and place strings of current chart.
This switch sets on the command line the contents of the name and
city string fields of the current chart. Note that this switch is
actually put into present style chart info switch files generated
with -o to reload the name fields. You can convert an old style file
created before version 4.20 to new style and add in the name fields
for it with: -i file -zi "the name" "the city" -o file. (Note that
you may also want to correct the time or time zone if Daylight time
was in effect though.)
-q <month> <date> <year> <time>: Compute chart with defaults.
The -q <month> <date> <year> <time> option takes the four parameters
and casts a chart for the time in question. The time zone and
location are taken from the default compiled values. This is just yet
another useful shorthand way to quickly make a chart. Note that the
-qa option which takes all seven chart parameters can be duplicated
with -q along with the -z <zone> and -l <long> <lat> options.
-qd <month> <date> <year>: Compute chart for noon on date.
The -q <month> <day> <year> option can be used to cast a quick chart
for 12 noon on a particular date, using the default longitude and
latitude, and time zone. One example where this is useful is with the
-d option, e.g. to see the times of exact aspects on a particular
date, like your next birthday, your finals, etc, without having to
specify unnecessary data. Note that this is just like the -q switch
except that -q requires a specific time on the day in question as well.
-qm <month> <year>: Compute chart for first of month.
-qy <year>: Compute chart for first day of year.
A quick chart cast for midnight on the first of a month can be
generated with the two parameter -qm <month> <year> switch. A chart
cast for midnight on the first of January of a year can be generated
with the one parameter -qy <year> switch. Both of these use the
default time zone and location. These switches are most useful for
charts that don't require all the standard information. For example,
to get an ephemeris for December, 2000, do "astrolog -qm 12 2000" and
avoid having to enter in a day, hour, or location that wouldn't have
any effect. These options are in similar to the -qd <month> <day>
<year> switch above that will do a chart for noon on the given date,
and the -q <month> <day> <year> <time> switch that takes a time as well.
-qa <month> <date> <year> <time> <zone> <long> <lat>:
Compute chart automatically given specified data.
Normally one generates a new chart by entering the data coordinates
interactively. A fast typist familiar with the program might prefer
to give all the info at once, which can be done with this option.
Simply list the seven parameters above, in the exact format as they
would be given to the program were the user being prompted for them.
(Note that it's probably better to use the -qb switch below because
of its extra parameter; the -qa switch will automatically assume
Daylight time is off.)
-qb <month> <date> <year> <time> <daylight> <zone> <long> <lat>:
Like -qa but takes additional parameter for daylight offset.
This switch is just like the -qa switch above except that it takes
one extra parameter for the Daylight Saving time flag. In order, the
eight parameters for -qb are Month, Day, Year, Time, Daylight offset,
Time Zone, Longitude, and Latitude. (Like -zi this switch is also put
into chart info files by -o.)
-qj <day>: Compute chart for time of specified Julian day.
This switch will automatically cast a chart for the given Julian Day.
Unlike the other -q switches which take standard months, days, and
years, this switch takes one parameter for the Julian Day (which may
be fractional to specify a time within the day in question). For
example, another way to cast a chart for Midnight, GMT, on New Year's
day of 1994 is with "-qj 2449353.5". (Julian Day 0 refers to Noon
GMT, January 1, 4712 BC.)
Known bug: If the extended Placalc formulas aren't compiled into the
program it will have to use an older version of the Julian day
conversion routines which will result in these -qj charts giving
incorrect results for dates in the Julian Calendar, i.e. before
October 1582, which can be seen by casting a chart with -qj
specifying a day less than 2299161.5, in which case the Julian Day
displayed for the date of the chart cast will be ten days greater
than what was passed to it.
-i <file>: Compute chart based on info in file.
See the -o option below.
Note that there is a "virtual file" named "set" which can be passed
to the -i and -r switches. Instead of looking for an actual disk
file, this represents the "last" set of chart information dealt with,
and is useful to avoid having to manually enter information in
certain cases. (Other "virtual files" Astrolog can use are "now"
which means the current time at the default location, and "tty" which
means prompt the user for the info.)
This is best used within a -Q loop. For example, you first manually
enter the time for a chart and it's displayed. Now, this time in the
loop, you want the same chart in an aspect grid, and don't want to
have to enter the data again or create a file to read from. Entering
"-i set" will use this chart info now matter how it was entered. For
graphics charts this "last" chart will be set to the initial chart or
whatever animation situation was saved via the 'o' key. Perhaps the
most useful ability of the "set" chart however is that it will set
itself to times that appear in -t and -d transit and aspect in day
searches. For example, if you want to cast a chart for the New Moon
last January, first do a combination like "-qd 1 11 1994 -d -R0 1 2
-A 1", which will scan the 11th for Conjunctions involving the Sun
and Moon, and display the time. Before, to get a New Moon chart one
would then have to manually specify the time displayed. Now, just "-i
set" will bring it up!
The initial contents of the "previous" chart, i.e. what you get by
directly doing something like "astrolog -i set" are initialized to
the astrological "chart" for the release of this version 4.40 of the
program itself, which is the exact time of the Aquarius New Moon,
specifically for 2:48pm PST (8 hours before GMT) on Monday, January
30, 1995 for here in Seattle, WA (122W20, 47N36).
This is one more "virtual file" that's obscure and only useful in
certain circumstances, named "nul" which may be passed to the -i file
input or -r switches which take chart info files for parameters. The
file "nul" means to not change the chart info parameters any, but
rather leave them with whatever current settings they may have or
were set to before. This is mainly useful with the -r switches if you
don't want to have to create two actual files to pass in, or use the
virtual file "tty" and have to enter in data interactively. For
example, to see what your biorhythm is like for the beginning of
December, do "astrolog -qm 12 1995 -rb nul yourchart" on the command
line and no further input is needed.
-o <file> [..]: Write parameters of current chart to file.
The program supports directing chart information to, and reading
output from, data files. The '-o' option will dump all the birth data
(the date and location, not the planet positions) to the specified
file. The '-i' option will cast the chart based on the info in the
file. (This allows you to put your birth data into a specific file,
and cast your chart whenever you want to after that without having to
reenter your birth data all the time.)
Another file output feature, the ability to concatenate "comment
lines" at the end of a data file, is included with both the -o and
-o0 options, as you may wish to say keep track of info other than the
program supported name and city. After scanning the filename, the
-o[0] option will then write any parameter that follows it at the end
of the file, until a parameter beginning with a '-' or '/' (the next
obvious command switch) is reached. For example: -o <file> "Birth
certificate" Family, will add extra info indicating the source of my
birth data, and a general category for the chart, in two separate
lines at the end of the file. (On most systems, quotes can be used to
allow spaces within one parameter.)
-o0 <file> [..]: Like -o but output planet/house positions.
Ability to write the actual sign and house positions of a chart to a
file (instead of just the time and place) has been implemented via
the -o0 <file> option. This option can be used interchangeably with
the -o output to file switch. The information written includes the
zodiac position of all unrestricted objects, their retrograde
velocity, declination, and distance, as well as the positions of the
house cusps. This file information can easily be passed into another
program, and can be read back into Astrolog with the -i option. The
-i option will automatically determine which type the file is, and
will either use the given positions, or else calculate them as
needed. (Note that some switches, such as the -c house system
selection, will have no effect for this file type.) Check an example
of one of these files to see the precise format (a zodiac position is
recorded as three numbers: degree in sign, sign as number 1 through
12 or three letter abbreviation, and floating point minute within the
degree.) When the files are read back in, they will be flagged as
"having no space or time" like the composite charts in the chart
header displays.
This file format can allow one to do things such as transits to
composite charts (send the composite chart to file with -o0 option
and then read in the file with -i when using the -t switch)
composites between two composite charts (use -rc between two
composite charts sent to a file) and even, if one is willing to do a
small amount of editing, to do transits to midpoints or the 0 degrees
Aries point. Note that one can easily edit the positions in the -o0
position file to be whatever they like, so one could replace some
unimportant object (e.g. the vertex) with 0 degrees Aries or an
important midpoint value. Note that trying to still use the -o time
and space output with a chart in memory that doesn't have space/time
will confuse the program; it will either say it can't make the file
or else will output the time/space of the most recent parameter file
it read in.
Note for old style -o0 position files created before version 4.20
that aren't based on command lines (see -Yo switch later): the
positions of the eight uranians may be output to those planet
position files in addition to the 20 main objects, but only if the
uranians are actually calculated with -u in effect. Hence those
position files can be of two different lengths, but the program will
be able to read in both formats, leaving the uranians uninitialized
at zero Aries if they aren't also in the file.
-os <file>, > <file>: Redirect output of text charts to file.
This switch, given a file, will output the contents of a text chart
to that file. This is just like output redirection (i.e. "> textfile"
at the end of a command line) except that it's implemented within the
program. Hence unlike output redirection it will work from within a
-Q loop, from the File Run menu in Microsoft Windows, and on systems
whose shells don't allow redirection at all. This also has the
advantage in that prompts and user messages won't be sent to the
file, hence things can be done such as "astrolog -os textfile", where
the program will still prompt you on the screen for the chart info,
but the chart itself will still go to the file.
The -os switch may also be expressed as ->, which is included as a
convenience with its similarity to the ">" output redirection
featured in many shells. As with all switches, one may leave off the
dash and invoke it as just ">". When just ">" is included on the
command line, the system's own output redirection will tend to be
used. This switch allows one to also include ">" when prompted for
command lines within the program, or when running from MS Windows,
where the shell plays no part.
--
Switches which affect what information is used in a chart.
-R [<obj1> [<obj2> ..]: Restrict specific bodies from displays.
The ability to restrict the transit (-t) and daily aspect (-d) scans
to just certain bodies has been implemented with the -R switch. Using
-R by itself will prevent the asteroids, Chiron, Lilith, the Part of
Fortune, East Point, and the Vertex from being in any of the charts.
One may also give a list of one or more numbers representing planets
to be ignored (e.g. 1 = Sun, 2 = Moon, 3 = Mercury, etc) or specify
planet abbreviations directly, so that a complete custom setup can be
obtained (e.g. "-R 1 2 3 4 5" or "-R sun moo mer ven mar" will cause
all of the inner planets to be ignored). More than one -R switch can
be combined (e.g. -R -R 16 will cause the asteroids, etc, and the
North Node to be ignored; the first -R gets rid of the asteroids,
etc, and the second one deletes the North Node.) Also, specifying the
same particular body more than once will cause it to be included
again, or in other words, -R <objectnum> complements the status of
whether it is to be ignored or not (e.g. -R -R 15 will cause all of
the asteroids, etc, excluding Vesta, to be ignored; the first -R
makes causes the asteroids to be ignored, and specifying Vesta in the
second -R makes it reappear.)
Note that Astrolog will compute charts faster when objects are
restricted, since it doesn't bother to compute locations that aren't
needed or used. For example, the search of a year for a Solar Return
(-i chart -ty year -R0 sun -RT0 sun) is about twice as fast than when
the restrictions are omitted, since we're only looking at Sun locations.
-R0 [<obj1> ..]: Like -R but restrict everything first.
The -R0 option will cause ALL of the bodies to be ignored, which is
useful if you are looking for just the transits/aspects of a few
planets (e.g. -R0 6 7 will cause everything but Jupiter and Saturn to
be ignored.) Combining all these methods can cause whatever you are
looking for in transits and aspects to be quickly found without having
to wade through lots of stuff you aren't interested in.
-R1 [<obj1> ..]: Like -R0 but unrestrict and show all objects.
This will unconditionally UN-restrict all planets and other objects
used by the program, a compliment to the -R0 switch above which
restricts everything. Note that this will also set modes, in that it
does automatically activate the -C, -u, and -U sets of objects.
-R[C,u,U]: Restrict all minor cusps, all uranians, or stars.
These three switches are similar to the -R0 option in that they
initially restrict objects, i.e. all the minor cusps, Uranians, and
stars, (described below) respectively from appearing. For example, if
you want to include only the star Sirius in an X window chart without
having to also include all the other stars (or having to enter a very
long restriction list), do: "astrolog -U -RU 48 -X", which will
include the stars, and then restrict them all except Sirius, before
making the chart.
-RT[0,1,C,u,U] [..]: Restrict transiting planets in -t lists.
Transiting planets may be restricted from charts independently of
those planets being transited to. In -T charts, the -R option only
affects the natal planets. To restrict transiting planets, one must
use the -RT option. The -RT option is exactly like -R, and any
subswitches of -R can be used with -RT as long as the 'T' immediately
follows the 'R'. For example, -RT by itself restricts transiting
asteroids from appearing in -T charts, -RT0 restricts all transiting
bodies, -RTu restricts the Uranians, and so on. This is a really
useful feature, and allows one to pretty much be able to generate
exactly and only those transits one is interested in. For example, if
you want to see if anything is transiting your natal Jupiter or natal
Saturn this month, do: "astrolog -i yourchart -T 3 1993 -R0 6 7". If
you want to see if Chiron is transiting anything this year (excluding
asteroids), do: "astrolog -i yourchart -Ty 1993 -RT0 11 -R". If you
are only interested in transits of outer planets to your Sun or Moon,
do: "astrolog -i yourchart -T 3 1993 -RT0 6 7 8 9 10 -R0 1 2", and so
on. By default, only the transiting Moon is restricted. To get it
back, merely unrestrict it with "-RT 2". These default transit
restrictions are in the astrolog.dat defaults file described later,
and are right after the standard restriction table, both of which may
be modified however you please.
-RA [<asp1> ..]: Restrict aspects by giving them negative orbs.
The -RA switch will restrict the given aspect or list of aspects from
appearing in charts, like how the -R switch does for objects.
Technically, an aspect will be restricted if it's given a negative
orb. The -RA switch just gives the specified aspects negative orbs,
and is a shorthand for having to explicitly use the -Ao orb setting
switch. (This means that -RA won't toggle an already restricted
aspect back on however.)
-C: Include angular and non-angular house cusps in charts.
This option must be indicated to include the 12 actual house cusps
(i.e. Ascendant, et al) in the various chart options, such as the -g
aspect grids, -t transit searches, the graphics wheel chart, etc.
This option of course won't have any effect on certain charts where
only physical bodies are shown (e.g. -Z, -S, -L) or where all house
cusps are already indicated in the chart (e.g. -v, -w). The house
cusps technically have actual object indexes like the planets, and
are objects 21 through 32 in order (add 20 to a house to get its
index). You can deal with and restrict these individually for
transit and other charts, e.g. to turn on just the Ascendant and MC,
do "-C -RC 21 30" Concerning rulerships, each cusp object is set to
"rule" the sign corresponding to it (e.g. Ascendant "rules" Aries)
while each cusp "exalts in" the next sign after it of the same
element (e.g. Ascendant "exalts in" Leo).
-u: Include transneptunian/uranian bodies in charts.
Display the locations of the "Uranian" planets with the -u switch.
Transneptunian or Uranian planets are an interesting subset of
astrology which includes various objects alleged to be beyond Pluto.
(Do: astrolog -u -O to list the eight Uranian bodies.) Anyway,
Astrolog will display the zodiac positions of these planets as well if
one includes this option, and will print their positions after the
main planets, or include them in the other chart types.
-U: Include locations of fixed background stars in charts.
Astrolog has the ability to display the positions of 47 of the
brightest and most important stars in the sky. To include these stars
in a chart, use the -U "universe" option. The 43 brightest stars,
i.e. all those with apparent magnitude values < 2.0 are included, in
addition to four dimmer "stars" which are considered significant,
i.e.: Polaris the North star, the Pleiades (specifically the star
Pleione within it) star cluster (home of our extraterrestrial
cousins), Zeta Reticuli (home of the Grey aliens), and the Andromeda
(M31) Galaxy (closest galaxy to our own Milky Way, and home to
various extraterrestrial hierarchies.) One bright star is called
"Orion", which is formally Alnilam, the middle star of Orion's belt.
Since stars are fixed in the sky, they will never change position in
the -s sidereal zodiac, although they will slowly precess forward in
the normal tropical zodiac. The -R restriction option can be used to
determine which stars are actually included, although the -U option
still needs to be included to get any stars at all. (With on screen
graphics, the stars are labeled by three letter abbreviations, and
are colored according to their brightness: orange for stars brighter
than (less than) magnitude 1.0, and dark red for the dimmer remaining
stars with magnitudes greater than this value.)
-U[z,l,n,b]: Order by azimuth, altitude, name, or brightness.
In the -v standard chart, -Z horizon chart, and in the -O object list,
where all the stars are printed sequentially, it can sometimes be
confusing to locate the star you want among 42 others. The -U option
can be modified to sort the stars in various ways. If one uses -Ub
instead of just -U, the stars will be listed in order from brightest
to dimmest. Doing -Un instead of -U will alphabetize the stars by
name. -Ul will sort them by their altitude from highest in the sky to
lowest, while -Uz will sort them by their zodiac position. Note that
any star ordering will have no visible effect in X windows, and one
must still use the default ordering when passing numbers to the -R
option to restrict various stars.
-A <0-18>: Specify the number of aspects to use in charts.
If you like many aspects, or only desire the major ones, to be
included in the aspect grids, specifying -A <number> will limit or
extend the number of aspects (e.g. -A 2 will make charts with only
conjunctions and oppositions listed in them, while -A 18 will include
all 18 aspects that Astrolog supports.)
-Ao <aspect> <orb>: Specify maximum orb for an aspect.
Change the default orbs of the various aspects with the -Ao <aspect>
<orb> switch. Do you not like the 7 degree orbs for conjunctions that
are in there by default? Given an aspect number and an orb value,
the orb used for that particular aspect is updated accordingly.
Non-integer orb values are allowed of course. Use negative orb values
to completely eliminate an aspect from ever appearing. For example:
astrolog -Ao 2 4 -Ao 4 -1 narrows the orb for Oppositions, and
completely eliminates Trines, leaving all the other aspects at the
default values. Note that for very wide orbs more than one aspect may
apply for a particular angle, in which case the more fundamental
aspect is chosen. Also for wide aspects the fractional value of the
orb may be lost in the -g text grid (due to too many characters) and
their might be some slight overlap in the X window -g cells.
-Am <planet> <orb>: Specify maximum orb allowed to a planet.
Ability to explicitly specify maximum orbs that any aspect can make
to a particular planet is supported with the -Am switch. This is used
for objects like the North Node which require narrower orbs than what
the aspects themselves normally allow. The -Am switch takes two
parameters: the first to indicate the index of the object, and the
second to indicate what the maximum orb allowed to it will be. By
default, the only objects with restriction are the Node, Part of
Fortune, Vertex, and stars, which allow a 2 degree max orb to them.
With this option, one can change these limits or impose restrictions
for other planets too. The astrolog.dat file (described later) will
read in these default planet orbs for the first 20 objects.
-Ad <planet> <orb>: Specify orb addition given to a planet.
Ability to widen an aspect orb for any planet is supported with the
-Ad switch. This is used for objects like the Sun and Moon for which
one might want wider orbs to them than what the aspects themselves
allow. Like the -Am switch, this -Ad switch takes two parameters: the
first to indicate the object, and the second to indicate how much
wider orbs allowed to it will be. By default, the only objects which
have orbs widened for them are the Sun and Moon, each of which adds
one degree to the orb of any aspect to it. With this option, one can
change these additions or allow other objects to have them, too. The
astrolog.dat file will also read in defaults for these orb additions
for the first 20 planets. (Note that these object orb additions can
be added to a negative orb for an aspect making it valid, so if you
really want to restrict an aspect with -Ao, it should be a large
enough negative value so that the sum of any additions between two
objects won't make it go positive.)
-Aa <aspect> <angle>: Change the actual angle of an aspect.
This option is used to change the actual angle of a particular
aspect. This is useful if one wants to search for some unusual angle
not already available in Astrolog's aspects or accessible through the
-x harmonic charts. For example, if I want to know when any planet
enters a 2.5 degree orb of any planet in my natal chart, I would do a
transit search along with "-Aa 1 2.5", where "1" is the index of the
conjunction aspect, and "2.5" means the "conjunction" is now exact
when any two objects are 2 degrees and 30 minutes apart.
--
Switches which affect how a chart is computed:
-b: Use ephemeris files for more accurate location computations.
Astrolog has a set of calculation routines which are much more
accurate than the standard Matrix software routines that are usually
used by default. One may choose between these calculation methods
with the -b switch. With -b, Sun through Pluto, the North Node, and
Chiron will be computed more accurately (although it will take
slightly longer). The other asteroids, uranians, stars, and house
cusps are always generated with the Matrix routines.
This advanced calculation uses ephemeris files for some planets which
must be in a directory specified at compile time in order to work.
The advanced routines are valid based on how many of the ephemeris
files one has. With all of them, the formulas will cover and deliver
accurate positions for nearly 8500 years from -5260 BC through 3237
AD! There are 62 ephemeris files total. Each file covers a range of
100,000 days, or about 273 years. Altogether they take up 2.8
megabytes of disk space, but each segment of 273 years only takes up
90K. For each time segment, there is an ephemeris file named "LRZ5_n"
containing the positions of Jupiter through Pluto (at 80 day
increments) and a file "CHI_n" containing the positions of Chiron.
The 'n' refers to span of Julian Days covered by it (divided by
100000). For example, Julian Days 1,200,000 through 1,300,000 are in
the files "LRZ5_12" and "CHI_12" (the 'm' character in some files
refers to negative/minus Julian Days). You don't need all the files
to use -b, just those that cover the dates you want to use. If you
try to use -b with a date not covered by an available ephemeris file,
an warning message will be printed and the Matrix positions will be
used. The files "LRZ5_24" and "CHI_24" cover the years 1859 through
2131 AD, which is good for most modern purposes and only take up 90K
of space. (These two files are included in the standard zip archive
release file of Astrolog. For Unix users who want any ephemeris
files, and PC users who want to cover more years, the complete set of
files is at anonymous ftp sites such as hilbert.maths.utas.edu.au.)
The following is a list of the precise dates covered by each
ephemeris file:
Files LRZ5_m2 and CHI_m2 cover Jun 6, -5260 BC through Mar 20, -4986 BC.
Files LRZ5_m1 and CHI_m1 cover Mar 20, -4986 BC through Jan 1, -4712 BC.
Files LRZ5_0 and CHI_0 cover Jan 1, -4712 BC through Oct 14, -4439 BC.
Files LRZ5_1 and CHI_1 cover Oct 14, -4439 BC through Jul 28, -4165 BC.
Files LRZ5_2 and CHI_2 cover Jul 28, -4165 BC through May 10, -3891 BC.
Files LRZ5_3 and CHI_3 cover May 10, -3891 BC through Feb 21, -3617 BC.
Files LRZ5_4 and CHI_4 cover Feb 21, -3617 BC through Dec 4, -3344 BC.
Files LRZ5_5 and CHI_5 cover Dec 4, -3344 BC through Sep 17, -3070 BC.
Files LRZ5_6 and CHI_6 cover Sep 17, -3070 BC through Jun 30, -2796 BC.
Files LRZ5_7 and CHI_7 cover Jun 30, -2796 BC through Apr 13, -2522 BC.
Files LRZ5_8 and CHI_8 cover Apr 13, -2522 BC through Jan 25, -2248 BC.
Files LRZ5_9 and CHI_9 cover Jan 25, -2248 BC through Nov 7, -1975 BC.
Files LRZ5_10 and CHI_10 cover Nov 7, -1975 BC through Aug 21, -1701 BC.
Files LRZ5_11 and CHI_11 cover Aug 21, -1701 BC through Jun 3, -1427 BC.
Files LRZ5_12 and CHI_12 cover Jun 3, -1427 BC through Mar 17, -1153 BC.
Files LRZ5_13 and CHI_13 cover Mar 17, -1153 BC through Dec 28, -880 BC.
Files LRZ5_14 and CHI_14 cover Dec 28, -880 BC through Oct 11, -606 BC.
Files LRZ5_15 and CHI_15 cover Oct 11, -606 BC through Jul 24, -332 BC.
Files LRZ5_16 and CHI_16 cover Jul 24, -332 BC through May 7, -58 BC.
Files LRZ5_17 and CHI_17 cover May 7, -58 BC through Feb 18, 216 AD.
Files LRZ5_18 and CHI_18 cover Feb 18, 216 AD through Dec 1, 489 AD.
Files LRZ5_19 and CHI_19 cover Dec 1, 489 AD through Sep 14, 763 AD.
Files LRZ5_20 and CHI_20 cover Sep 14, 763 AD through Jun 27, 1037 AD.
Files LRZ5_21 and CHI_21 cover Jun 27, 1037 AD through Apr 10, 1311 AD.
Files LRZ5_22 and CHI_22 cover Apr 10, 1311 AD through Jan 31, 1585 AD.
Files LRZ5_23 and CHI_23 cover Jan 31, 1585 AD through Nov 16, 1858 AD.
Files LRZ5_24 and CHI_24 cover Nov 16, 1858 AD through Aug 31, 2132 AD. *
Files LRZ5_25 and CHI_25 cover Aug 31, 2132 AD through Jun 16, 2406 AD.
Files LRZ5_26 and CHI_26 cover Jun 16, 2406 AD through Mar 31, 2680 AD.
Files LRZ5_27 and CHI_27 cover Mar 31, 2680 AD through Jan 14, 2954 AD.
Files LRZ5_28 and CHI_28 cover Jan 14, 2954 AD through Oct 30, 3227 AD.
File LRZ5_29 (no CHI_) covers Oct 30, 3227 AD through Aug 15, 3501 AD.
Astrolog uses the formulas from the "Placalc" program package to
generate its precise positions. Placalc's accuracy is about the same
as Mark Pottenger's "CCRS" routines, and those used in Nova (it even
fixes some accuracy problems Nova has, in some of its earlier
versions at least). Placalc's integrated outer planet positions
represent the standard of the Nautical Almanac, the international
astronomical standard, as published in the Astronomical Almanac, for
its computations as computed before 1984. (Since 1984 the standard
has been the DE200 integrations by JPL.) The Sun's position
implements the Newcomb theory for all terms > 0.01", the positions of
Mercury through Mars are done to all terms > 0.05", while "Brown's
improved lunar ephemeris" is used such that the Moon is within 3" of
DE200. Placalc's fraction of second precision, is of course much
more accurate when compared to the Matrix positions, which are only
accurate to about one minute (and several degrees for Chiron, as well
as the four asteroids) for this century only. For example, at 1800
AD, the Matrix positions for the outer planets are off by 2 degrees,
and about 1 degree for 2100; by 1500 AD, Matrix is off by 14 degrees
for Pluto while Chiron is barely in the right hemisphere any more.
There is a flag to "Use ephemeris files" in the astrolog.dat file,
which when set, will always use the Placalc routines and is the same
as just including -b all the time, in which case -b will toggle them
back off. There is a compile time option #define PLACALC in the
astrolog.h which can be commented out to disable the -b switch and
the new formulas.
Note that this calculation method is not compatible with allowing the
-v0 switch to express planetary velocities relative to average speed
work with it, and nor will central planetary bodies other than the
Sun or Earth (standard Geo and Helio centric charts) via -h work. It
will however display velocities for the Moon and the Node, which
aren't available with the Matrix routines.
Special thanks goes to Dr. Alois Treindl who kindly allowed his
formulas to be used in Astrolog. Mr. Treindl is the founder and owner
of Astrodienst Zurich, second largest astrological computer service
in Europe, and is well known for his work with Liz Greene. Astrolog
basically treats his Placalc routines as a library which we link
into, in that code that knows about both programs is kept to a
minimum. In fact, any changes made to the Placalc .c and .h files are
under #ifdef ASTROLOG, so by reverse applying this, one can
regenerate the original files that came with the Placalc package.
-b0: Like -b but display locations to the nearest second too.
The ability to display zodiac positions to the nearest degree second
is supported with the -b0 switch. Normally all positions are
displayed just to the minute (which was all that is useful due to the
accuracy available in the Matrix formulas). With the Placalc routines
accurate to within seconds, this switch, in addition to turning on
the more accurate formulas like just -b above does, will also turn on
the more accurate display.
When this setting is on, the planet and house positions in the -w
text wheel chart, and the sidebar positions in graphic wheel charts,
will be to the nearest second. The -Z local space chart will display
the altitude and azimuth to the nearest second, while the other three
vector columns will be displayed with an extra digit of precision.
The -S orbital position chart will have all five of its columns
displayed to an extra four digits of precision. The -L0 astro-graph
chart with latitude crossings will display the latitude crossing
intersections to the nearest second.
Finally the standard -v listing will display the zodiac positions and
declinations to the nearest second, and the velocity values will have
an extra four digits of precision. Note however this doesn't leave
room to the right anymore for the house cusp positions and element
table normally shown. They will be left out for -b0, however when
the -C switch is in effect, the house cusp positions will be
displayed in their own separate rows, which normally isn't ever done
since there's always the list to the side. (One more thing is that
-b0 combined with -v will display an extra column at the end showing
the decan positions of each object, allowing viewing of each planet
alongside its decan without having to actually change positions with
the -3 switch.)
-c <value>: Select a different default system of houses.
(0 = Placidus, 1 = Koch, 2 = Equal, 3 = Campanus, 4 = Meridian,
5 = Regiomontanus, 6 = Porphyry, 7 = Morinus, 8 = Topocentric,
9 = Equal (MC), 10 = Neo-Porphyry, 11 = Whole, 12 = None.)
Thirteen different house systems are supported in the program: Invoke
as astrolog -c <number> to change the system from the default of
Placidus. Note that certain house systems (i.e. Placidus and Koch)
aren't defined for locations inside the Ant/arctic circle. If the
user attempts to cast a chart using them with a latitude beyond about
66 degrees N or S, the program will halt and print an appropriate error.
House system number 9 is the Midheaven based Equal house system. This
is just like the more common standard Equal house system (-c 2)
except that we start with the 10th cusp being the same as the MC and
disassociate the 1st cusp from the Ascendant, instead of starting
with the 1st cusp being the same as the Ascendant and disassociating
the 10th cusp from the MC.
House index 10 is the Neo-Porphyry system of house division. This is
a new system similar to Porphyry houses except that it's "smooth"
around the zodiac with the MC/Asc difference being spread in a
continuous sinusoidal manner from expanded to compressed quadrants.
House index 11 is the Whole system of houses, where the first cusp is
at zero degrees of the sign of the Ascendant, and the others are all
at the beginning of the succeeding signs. This is basically the same
as the Equal system with all positions shifted back to the start of
their sign. Thanks to Andy Gray for telling me about this system and
how it's computed.
House system 12 refers to no houses at all, or in other words where
the Ascendant will always be 0 degrees Aries, the Nadir 0 degrees
Cancer, etc, which is useful for the extended chart animations as
described later, where having houses at all can tend to get in the
way; one can even observe the precession of the equinoxes with this
system if used in conjunction with the -s sidereal chart option.
-s [..]: Compute a sidereal instead of the normal tropical chart.
With this option, the chart will be just like the normal charts as
most commonly used in astrology, except that all the zodiac positions
will be shifted (to be about 24 degrees earlier). This is because the
option casts sidereal charts which are based on the positions of the
fixed stars (i.e. Aries starts at the constellation Aries) rather than
the seasons (i.e. Aries starts at the Spring or Vernal Equinox.) Due
to the "precession of the equinoxes" the position of the Sun at
the Equinoxes has been gradually happening at an earlier point in the
sidereal zodiac each year (taking about 2100 years change signs.)
This switch accepts an optional parameter of an offset for the start
of the zodiac. This value, when non-zero, will be added to all zodiac
positions, and effectively allows one to choose any starting point
for the sidereal (or tropical) zodiac, which is useful for Hindu or
other systems whose sidereal zodiacs have zero Aries at a different
location than the standard Western sidereal zodiac. This value is
initialized to a zodiac offset value setting in the astrolog.dat
initialization file, which is by default zero.
-sr: Compute right ascension locations relative to equator.
This will display planetary positions relative to the Earth's equator
instead of the ecliptic i.e. Earth's orbit. This is the way more
commonly used in astronomy, and results in real right ascension
notation, especially when combined with the -s sidereal zodiac and
-sh hours and minutes display format. This switch makes the
declination values in the standard -v listing also relative to the
equator, instead of the ecliptic latitude displayed by default.
(Without this the only way to get such information is from the zenith
latitudes in the -L astro-graph chart which show the same thing.)
Note that this setting isn't fully integrated with all of Astrolog's
charts; specifically it will distort the values in the -Z local
horizon, -S orbit, and -L astro-graph charts which assume ecliptic
positions, and hence -sr shouldn't be combined with these options.
-s[z,h,d]: Display locations as in zodiac, hours/minutes, or degrees.
For astronomers out there, the -sh switch will express all planetary
positions in the right ascension hours/minutes format instead of the
sign/degrees/minutes astrologers are accustomed to. This will affect
how the objects are listed in the -v display, and how star azimuths
are displayed in the -HO list. For example, 0 degrees Aries is
represented as 0 hr, 0 min; 0 Cancer goes to 6 hr, 0 min, and so on
through the 24 hour clock. The -sd switch will cause zodiac
positions to be displayed as a simple degree value in the 360 degree
circle. To return to the default of displaying as a degree within a
zodiac sign, use the -sz switch.
-h [<objnum>]: Compute positions centered on specified object.
Normal astrology charts are based on the positions of the planets
relative to the Earth. However, this option allows seeing of the
zodiac positions with respect to the Sun's (or any other planet's)
point of view. The -h option when invoked by itself will display a
heliocentric chart: the Sun in the original listing will be replaced
with the Earth's position as seen from the Sun in the heliocentric
chart, with the other planets' positions modified accordingly. For
bodies other than the Sun, the option takes a parameter to indicate
which planet to center the chart on, e.g. do -h 5 to cast a Mars
centered chart. (Moon centered charts aren't allowed; in fact, note
that the -h option won't ever affect the Moon, which will always be
displayed as seen from the Earth, no matter what the center body is
set to, since it's not a formal planet.
-p <month> <day> <year>: Cast 2ndary progressed chart for date.
A secondary progression chart for a particular date can be cast using
the '-p <month> <date> <year>' command switch. (Note: I'm not sure if
the house cusps are progressed correctly for all methods of
computation, but they are reasonably close to what is expected using
most of them.) The precise time within the given day progressed to
is midnight in the default time zone.
Hackers note: this setting to progress charts to the specified time,
may be turned off by invoking the -p switch as "_p" with the
underscore reset prefix. Unlike the standard -p switch, _p take no
parameters. This is a command switch trick only useful when doing
multiple charts in a -Q loop, or when passing extra command lines to
a graphics screen with the return key or through macros.
-p0 <month> <day> <year>: Cast solar arc chart for date.
Solar arc progressions are supported in addition to secondaries.
Invoke the -p <month> <day> <year> switch as -p0 instead, and a chart
will be generated with all planets and house cusps progressed forward
an amount equal in degrees to the number of years that have passed
between the specified date and the chart in question. The -pd option
here (see below) specifies the number of days that have to pass per
zodiac degree to progress forward; by default this is 365.25. To
generate a solar arc chart for the current moment now, invoke the -pn
switch as -p0n.
-p[0]n: Cast progressed chart based on current date now.
The -pn switch is like the -p <month> <date> <year> switch except that
(like the -n switch) it assumes the current moment now to cast the
progressed chart to. This is just another shorthand convenience to see
what ones progressed chart is like presently; just do: astrolog -i
file -pn.
-pd <days>: Set no. of days to progress / day (default 365.25).
User definable progression rates can be specified with this option.
When using the -p progression option, Astrolog assumes you want the
standard "year for a day" rate of progressions. By passing different
values to the -pd switch, one can change the default "365.25 days for
a day" to any value they want for some less often used method of
progression. For example, one can do "-pd 7 -pn" to do a week for a
day, "-pd -365.25 -pn" to get negative year for day progressions, and
so on. For tertiary progressions, do "-pd 29.530588". (Note that "-pd
1 -p..." would be the same as if no progression were done at all.)
-x <value>: Cast harmonic chart based on specified factor.
Harmonic charts (i.e. where all the planet positions are multiplied
by a factor and the chart recast) are supported via the "-x" option
(e.g. "-x 3" will make all trines conjunct in the chart displayed.)
The parameter passed in may range anywhere from 1 (i.e. no harmonic
factor) to 30000 for those who want to explore extreme harmonics.
-1 [<objnum>]: Cast chart with specified object on Ascendant.
The -1 <obj> option can be used to change the houses to force a
particular object to be on the ascendant. This is useful in casting
Solar charts or for when the time of birth is not exactly known. For
example -1 2 will case a normal chart, but the house cusps will be
rotated so that the moon is on the ascendant.
-2 [<objnum>]: Cast chart with specified object on Midheaven.
Just as the -1 option is used to cast a chart with an object on the
Ascendant, the -2 <object> switch will cast a chart with the
specified object on the Midheaven. The house cusps will be rotated so
that the object in question is conjunct the 10th house cusp. As with
the -1 option, if <object> is not specified, the Sun will be assumed
by default.
-3: Display objects in their zodiac decan positions.
Decan displays are supported in Astrolog, and one can display a decan
influenced chart with the -3 switch. The decan theory is that each
sign in the zodiac can be divided into three parts: The first 10
degrees (i.e. the first decan) is mainly influenced by the sign in
question, the second 10 degrees (second decan) although still
influenced by the sign in question is also somewhat influenced by the
next sign of the same element, while the last decan is influenced by
the third sign of the same element. The -3 switch applied to a chart
will move each object into the sign of its decan. For example, if the
Sun is at 29 degrees Aquarius and the Moon at 5 degrees Virgo, in the
resulting chart, the Sun will go to Libra (26 degrees) and the Moon
will remain in Virgo (although be at 15 degrees now since it was
previously in the middle of the first decan of Virgo.)
-f: Display houses as sign positions (flip them).
The -f option can be used to "flip" the signs and houses, i.e. display
the house as a sign position and vice versa. For example having the
Sun at 26 degrees Scorpio, 2/3 way though the 10th house, will cause
the resulting Sun under the -f option to be at 20 degrees Capricorn,
26/30th the way through the 8th house. This can be used to determine
how far a planet is through a particular house, as well as for domal
chart analysis that Mark Kenski has informed me about. Domal analysis
is based on the fact that for synastry comparisons, for example, a
planet in Gemini and one in the 3rd house can be considered related in
a way similar to a conjunction.
-G: Display houses based on geographic location only.
This switch generates a special type of locational analysis chart,
called a geodetic chart, in which the house cusps are computed from a
different source, i.e. as a function of only the longitude and
latitude. This basically gives every spot on the planet a different
unique set of house cusps, and can be used to analyze the
characteristics of different areas, and their influence on you if you
insert your own planets in the houses. This type of chart was
described in the January 1992 issue of Dell Horoscope magazine, from
which I learned how to generate these charts. Basically, the Midheaven
is approximately the longitude value converted from degrees into the
appropriate zodiac sign; for example 0 degrees E goes to 0 degrees
Aries, 30 degrees E goes to 0 degrees Taurus, etc.
-F <objnum> <sign> <deg>: Force object's position to be value.
The -F option is used to force a particular object's position to
always be a particular location in the zodiac. This feature can be
used as an easy way to manually include things Astrolog normally
doesn't in various charts. For example, this can be used to force the
position of some minor thing, like the Vertex, to always be the
location of whatever you prefer, like the 0 degrees Aries point, or
an important midpoint. Then you can do an aspect grid, transit
search, or whatever, and calculate aspects to midpoints or transits
over midpoints. The -F switch takes three arguments: first is the
index of the object to replace, next is the sign from 1..12 to force
it to be, and third is the degree within the sign. For example, if I
want to see if anything is making an exact aspect today with my Sun
Moon midpoint at 6Sag28, I could do "astrolog -n -d -F 16 9 6.28",
which would replace the North Node with my Sun Moon midpoint in the
aspect search.
-+ [<days>]: Cast chart for specified no. of days in the future.
The -+ <#ofdays> option will cast a normal chart, but one for #ofdays
in the future (or past if a negative value is given). One use for
this is in combination with the -n and -d options. For instance, I
often invoke the program as "astrolog -n -d" to see the exact times
of today's aspects. However, just before midnight I might want to
see what's going to happen in the following day, so I would do
"astrolog -n -d -+ 1" to see the exact times for tomorrow's aspects.
The #ofdays parameter is optional, and will default to one if left
off, so the above command can be done as just "astrolog -n -d -+".
Note that for such a chart, the chart header will show the correct
date of the actual new chart, instead of the original one. For
example, today (9-11), if I do "astrolog -n -+ 2" I will get the
chart for two days from now, and the chart header will display 9-13.
This has some special uses. For example, if you want to know what the
date was/will be when you are 10000 days old, do "astrolog -i
yourchart -+ 10000" and see what the date in the resulting chart
header is.
-- [<days>]: Cast chart for specified no. of days in the past.
This "dash minus" option is just like the "dash plus" (-+) option
described above, except it subtracts instead of adds the specified
number of days from any chart cast. This is only for convenience, in
that "-- 1" is the same as "-+ -1".
-+[m,y] [<value>]: Cast chart for no. of months/years in future.
The -+m switch is just like the -+ switch above except that it will
add one month (30 days) to whatever chart instead of one day. The
-+y switch will add one year (365 days) to whatever chart. The --
"dash minus" switch is extended in a similar manner, in that --m and
--y will do as expected. These switches also have the optional
parameter to specify how many months or years to move forward or back.
--
Switches for relationship and comparison charts:
-r <file1> <file2>: Compute a relationship synastry chart.
Computing the relationship between two charts is supported. Invoke the
program as 'astrolog -r <file_of_person1> <file_of_person2>' and the
program will give you the relationship between the two charts. In
other words, the program will use the positions of person2's planets
and person1's houses. Use this with the -w option to get a wheel chart
and you can do synastry. Note that transits can be computed with this
by comparing your chart with the positions of the planets at the
current moment (as in -n switch). To make this easier, you may specify
the filename "now" for any file and the computer will use the current
planet positions instead of looking for a like named file. (e.g.
'astrolog -r me now' will compute transits for file 'me'.)
Hackers note: if the -r switch is invoked as "_r" with the underscore
reset prefix, whatever relationship mode will be canceled. Unlike the
standard -r switches, _r takes no file parameters. This is a command
switch trick only useful when doing multiple charts in a -Q loop, or
when passing extra command lines to a graphics screen with the return
key or through macros. Astrolog's -r relationship chart switches set
relationship chart mode, and without this there's no easy way to
return to single chart mode. Yes when a graphics screen is up, the
'c' key will toggle relationship comparison mode, but that's not
available from the command line.
-rc <file1> <file2>: Compute a composite chart.
The '-r' option can be used to generate composite relationship
charts. Simply invoke it as '-rc <person1> <person2>' instead of
just -r and a composite chart (i.e. composed of the midpoints of the
planets, etc. of the two charts in question) will be generated.
(Note: when the house cusps in the two charts are nearly 180 degrees
apart, simply taking the midpoints of all the cusps may result in
them being out of order in the resulting composite. In such a case we
give priority to the composite midheaven, and invert the midpoints of
any of the other cusps or the Ascendant by 180 degrees if leaving
them that way would have things out of order.)
-rm <file1> <file2>: Compute a time space midpoint chart.
Time-space midpoint relationship charts are supported: Doing "-rm
chart1 chart2" will calculate the time and location exactly half way
between the times and locations as indicated in the two files. Unlike
all other types of relationship charts, this one actually exists in
space and time, and therefore can be treated like a single chart and
can be output to a file with the -o option.
-r[c,m]0 <file1> <file2> <ratio1> <ratio2>: Weighted chart.
The -rc composite and -rm time-space midpoint relationship charts may
be weighted to give more influence to one of the charts. When the
switches are invoked as -rc0 or -rm0 they accept two additional
parameters which are the ratio weights to give to the two chart files
in question. For example, the sequence "-rm person1 person2 2 1" will
still do a time space midpoint chart, but the time and location that
the chart is cast for will be biased at a 2:1 ratio toward person1,
i.e. will be 2/3 of the way from person2's chart info closer to
person1's info.
Note that the -rc0 switch can be used to generate multiple composite
charts between more than two people! A composite chart between two
people can already be done and saved to a file with "-rc person1
person2 -o0 composite12". A third person can now be merged in by
doing a composite between it and the composite of the first two, but
giving the first result a 2:1 ratio because two charts have already
gone into it, by "-rc0 composite12 person3 2 1 -o0 composite123". A
fourth person can then be merged in at a higher ratio with "-rc0
composite123 person4 3 1 -o0 composite1234" and so on. Actually this
method won't always generate a 100% correct multiple composite chart
in cases where the objects are spread out over 180 degrees and the
initial composites put the current midpoint in the wrong half, e.g.
if the Suns of person1 through person3 are 1Can, 29Sag, and 0Ari,
then the true composite Sun is at 0Ari, but composite12 is at 0Lib
and hence the final composite is at 0Leo or 0Sag, in the wrong
"quadrant" biased toward the earlier results. Still the results are
useful and the method can be used with -rm0 to get the correct
average between multiple chart locations.
-rd <file1> <file2>: Print time span between files' dates.
One useful non-astrological function in the program is the ability to
determine how much time has passed between two dates, with the -rd
switch. As with the -rb option below, this is considered a
relationship "chart" because it requires the input of two different
dates, and when -rd is in effect, again the standard -v planet
position listing will be replaced by a line telling how much time has
passed in the interval. The time difference is expressed in seven
ways: to the nearest year, month, week, hour, minute, and second.
For example, "-rd person1 person2", will display how many years,
days, etc person1 is older than person2 (or the other day around).
Want to say know how many years older your mother is than you? Just
do "-rd momchart yourchart". Want to find out how many days old you
will be on Jan. 1, 2000? Do "-rd yourchart tty", and type in the
first date of the next millennium, and see what you get!
-rb <file1> <file2>: Display biorhythm for file1 at time file2.
Biorhythm charts are supported by Astrolog with the -rb switch.
Although not directly related to Astrology, the concepts are similar,
and adding this didn't require much extra code, and since some are
interested in this, I felt I'd add it in. The biorhythm theory says
that we have three main types of energy: Physical, Emotional, and
Intellectual. These three run in continuous wave cycles from high to
low, each of which repeats about every 30 days or so. Therefore, a
biorhythm chart for a particular day should describe how much energy
one has or how they are feeling in this area. Now, Astrolog considers
biorhythm charts as a type of relationship chart, because in order to
generate one, two dates or charts are needed: the birth date of the
person, and the date to cast their chart for. Technically the program
will replace the standard -v listing of planet positions with the
biorhythm chart when -rb is in effect. As an example, "-rb file1
file2" will cast the chart for the birthday signified by chart1 or
chart2 (whichever is older) for the date in the other file. Remember
that one can substitute the pseudo filename 'tty' to mean get the
chart info from the terminal instead.
The actual biorhythm chart itself will display, for the day in
question, what the percentages of the physical, emotional, and
intellectual cycles are, as numbers from -100% (low ebb) to +100%
(happy and full of energy). In addition, the biorhythm percentages for
the seven days before (T-7 days) and the seven days after (T+7 days)
the date in question will be listed, too, so one can see if the
cycles are rising or falling. Finally, as a cute way to help in
interpretation, the program prints the appropriate smiley, medium, or
sad face after each percentage. (BTW, it takes over 58 years for all
three cycles together to synchronize and repeat themselves.)
-r0 <file1> <file2>: Keep the charts separate in comparison.
There is a distinction between any of the above types of particular
relationship charts and the actual comparison between two separate
charts. The -r0 option is used to generate actual comparison charts.
For example, combining -r0 with the -g switch will cause a full grid
chart of the aspects between all the planets of the two charts (with
person1's planets on the vertical axis and person2's on the
horizontal) to be displayed. (Unfortunately, if all 20 of the
default objects are left unrestricted here, the grid will exceed 80
columns, unless the 80 column clip feature (described later) is
turned on.) The -r0 option can also be used with the -X switch to
generate true relationship wheel charts, (described later). The -r0
option will act like the -r synastry option in certain displays that
can't compare two charts; for example, '-r0 -v' will act the same as
just '-r -v'. (Note: the "-t file" current transit option is
basically a shorthand way of doing "-r0 file now".)
Comparison relationship charts may also be generated for the -m
midpoint and -m0 aspect list options. Combining -m with -r0 will
yield an ordered list of all midpoints between all combinations of
one planet from chart1 and another planet from chart2. Combining -m0
with -r0 will yield a list of all aspects between planets in the two
charts, in order based on what Astrolog think their influences are.
So, if you really want to know if your Sun widely trining your SO's
Moon, will override the effect of your Saturn closely squaring their
Mars, do "astrolog -r0 yourchart sochart -m0" and see the influence
given to each aspect.
-rp[0] <file1> <file2>: Like -r0 but do file1 progr. to file2.
This switch is a form of the -r0 relationship comparison charts. This
switch, given two files, will compare the natal chart in file1, to
the chart of this natal chart progressed to the time specified in
file2. This is a shorthand way to the commonly desired comparison of
a progressed chart to a natal one. The -y switch may be invoked as
-yp <file> which will automatically compare the chart to the current
time now. For example, to get a dual graphic wheel chart with your
natal planets in the inner wheel, and your current progressed chart
on the outer wheel, simply do "-yp yourchart now -X". (There is no
easy way to do this otherwise, short of using -o0 position files,
since the -p progression switch will affect all charts.) The -rp
switch may also be invoked as -rp0, which will do the same thing but
as a solar arc progression instead of a secondary progression.
-rt <file1> <file2>: Like -r0 but treat file2 as transiting.
The -rt switch will behave exactly like the existing -r0 chart
comparison option but with one difference: transit restrictions will
affect the second chart. With -r0, both charts are treated as natal
charts and hence the normal -R restrictions apply to both, but one
may want to have different sets of planets active in the two charts,
such as in a wheel chart where transiting planets are being compared
to natal. The -y switch which is like the -r0 switch but assumes the
current moment now for the second chart, may be done as -yt in the
same way. For example, to do a graphic bi-wheel showing your complete
natal chart in the inner wheel, and only the current transiting outer
planets on the outer wheel, do "astrolog -yt yourchart -X -RT0 jup
sat ura nep plu".
-y <file>: Display current house transits for particular chart.
The command switch '-y <file>' can be used as a shortcut way to
compute the current transits for the chart in <file> (unless the TIME
features are compiled out), which saves you from having to mention
the "now" in the -r0 option.
-y[b,d,p,t] <file>: Like -r0 but compare to current time now.
The -y option is extended based on the -rb and -rd features. The -yb
<file> switch will display the person indicated in file's biorhythm
for today. The -yd <file> switch will display how many months, days,
etc old the person in the file is right now. Want to know how many
minutes old you are? Just do "-i yourchart -yd". Do the same command
again right away and see that you are now a couple seconds older than
the first time! There are also switches -yp[0] and -yt which similarly
behave like -rp[0] and -rt above but automatically compare to now.
--
Switches to access graphics options:
-k: Display text charts using Ansi characters and color.
With this option, the text charts may be displayed in color, as well
as with real graphics characters instead of with things like dashes
and pluses. This makes the text charts look almost as neat as their
color graphics counterparts. All that's needed is a terminal that
accepts Ansi escape sequences. You will get garbage if you include -k
on a non-Ansi terminal. (For this reason, the default for this flag
is off, although it can be made on all the time by setting the
appropriate flag in the astrolog.dat configuration file.) Most PC's
are in Ansi mode, so if you have a PC this should work. Include the
-k switch on the command line, and the program will display all
charts as before, but change the color appropriately for every part
of any chart printed! Just try a -w chart, a -g grid, or a -t list
and see the difference of how much easier it is to find a planet or
aspect among a large chart! I highly recommend this setting be made
on by default in the astrolog.dat file if your system will support
it, especially for PC users who display text charts on the screen
more often than they print one out.
Color isn't used randomly but is based on logic. Most colors are very
similar to the ones chosen in the color X charts. In general,
everything is based on the following rules for elements: Fire is Red,
Earth is Yellow, Air is Green, and Water is Blue. Zodiac signs and
positions are printed in the color of their element. Houses are
printed in the color of their corresponding sign. Planets are printed
in the color of the sign they rule. As for the other objects, we have
the following colors: Asteroids are in bright purple (magenta),
Uranians are in dim purple, and non-physical points like the Node,
Fortune, and Vertex are in a bluish gray (dark cyan). Stars are
either orange if they are bright (magnitude < 1.0) or a dark red if
dimmer. For aspects we have the following: Conjunctions are Yellow,
Oppositions are Blue, Squares are Red, Trines are Green, Sextiles are
Light Blue (Cyan). For the minor aspects we have magenta for
inconjunct/semisextile, orange for semisquare/sesquiquadrature, dark
cyan for all the quintiles, dark purple for all the septiles, and
dark red for all the noviles.
-V <25,43,50>: Start up with text mode set to number of rows.
For PC's compiled with screen graphics, the -V switch will change the
text screen to have the specified number of rows, assuming the
hardware available supports it. Legal values are 25, 43, and 50. This
most useful as an initial parameter when running the program from
Microsoft Windows (see later) to give more text rows to work in, or
in the -Q loop mode (see later), as well as being another way of
getting to the functionality of the DOS "mode" command. Note that
for Astrolog builds made using the Borland compiler, only the 25 and
50 line modes are available; attempting to enter a 43 line mode will
go to 50 rows.
-X: Create a graphics chart instead of displaying it as text.
This is the general switch, which means display a chart in an X window
instead of on the screen in some form. For example, the command
'astrolog -i mychart -X' will open a new window and display the chart
in question in it. (Of course, all the other switches, e.g. -R, -c,
-1, etc, can be used to change what info is actually displayed.) If
you use the -L astro-graph switch in addition to this, the appropriate
Astro*Carto*Graphy map will come up in a window instead of the earlier
boring list of longitudes. (e.g. astrolog -i me -X -L) The -Z and -g
switches will produce their own chart types as well, although, of
course, only one type of chart can be in a window at any given time.
-Xb: Create bitmap file instead of putting graphics on screen.
This switch will cause a bitmap file to be produced and written to a
file instead of putting the graphics on the actual screen. This is
useful if you want to convert the graphics to different formats, e.g.
so they can be displayed on alternate systems, etc. Note that -Xb (or
any other -X<letter> switch) automatically assumes the -X switch
above, so 'astrolog -i file -Xb' is sufficient (and you don't also
have to include the -X).
Bitmap files may be generated at any size without running out of
memory. If any particular sized bitmap it too large to fit in memory
all at once, Astrolog will generate it in multiple stages, using
available memory to do one section at a time, writing each piece to
the file as we go along. (This is similar to the banding method often
used to print large images to printers.) For versions of PC Astrolog
before 4.20, there was barely enough memory in the 640K available to
generate even the standard 640x480 color bitmap. Now one will always
be able to do any size allowed, even the maximum of 2730 by 2730
yielding a file nearly four megabytes in size! We do however have to
draw the chart once for each band, so if a bitmap is done in two
stages, it will take nearly twice as long to generate. Larger bitmaps
require more stages and more time, but we can at least always make
them. This banding is only done for the Windows bitmap format; the
other formats still need to be done in one shot, however the other
formats are usually done on non-DOS systems where memory isn't
limited to 640K.
-Xb[n,c,v,a,b]: Set bitmap file output mode to X11 normal,
compacted, very compact, Ascii (bmtoa), or Windows bmp.
The bitmap file can be written in five different formats; by default
whatever format specified at compile time is used. One can change
this mode by putting an extra character on the command line after the
-Xb switch. Specifically, to override the compile time mode, use -Xbn
for a standard X11 bitmap, -Xbc for an X11 bitmap with some white
space removed, -Xbv for a very compact X11 bitmap (which may not be
able to be processed correctly by all X programs), -Xba for a one
character per pixel Ascii dump identical to the result generated from
the X11 bmtoa program, and finally -Xbb for the Windows .bmp bitmap
described below.
One of the available bitmap formats are the .bmp extension bitmap
files commonly used on PC's running under Microsoft Windows. If you
have a PC running Windows, you can set your root background to be one
of these monochrome Astrolog bitmaps by: use the -Xb option to create
a bitmap file, then rename it to have the extension .bmp and put it
in your Windows subdirectory, then go into Program Manager -> Control
Panels -> Desktop and select this file to be your "wallpaper". These
bitmap files may be generated in either color or black and white.
By default, all graphic charts will be in color, unless specified
otherwise. Color is most useful for these PC bitmaps (-Xbb), although
a color bitmap will take up more disk space. X11 bitmap files will
always be output in monochrome format, since color .xbm files don't
exist. A color Ascii file (-Xba) will have the color value of each
pixel converted to a hexadecimal number, instead of being in the
format generated by the Unix bmtoa utility in the case of monochrome
charts.
-Xp: Create PostScript stroke graphic instead of bitmap file.
-Xp0: Like -Xp but create complete instead of encapsulated file.
Astrolog can generate PostScript graphics files! PostScript is a
graphics format different from bitmaps in that it's based on
"strokes" as opposed to "pixels". With a stroke graphic, an image is
defined in terms of "circle here, line there, etc" instead of a large
array. This means PostScript graphics can be printed at any size
without losing accuracy or becoming "blocky", and look perfectly
smooth when printed to a laser printer. A PostScript file is also
about an order of magnitude smaller in size than a corresponding
bitmap file.
To generate a PostScript chart, use the -Xp switch. This will work
just like bitmap files for all Astrolog's graphics charts, in that
you will be prompted for a file to write the graphics to unless you
explicitly pass a file to the -Xo switch. The type of file generated
will be an encapsulated PostScript graphic (which are usually seen
with a .eps extension) meaning that it's made to be inserted into a
document and scaled and so on and printed from there. A true
independent PostScript file which can be sent directly to a printer
can be generated by specifying -Xp as -Xp0 instead. As with bitmaps,
it is recommended to include -Xm for a monochrome graphic unless you
have a color printer, and to include -Xr so the chart is black on a
white background (so that you don't cover 90% of the page with ink
when printing)!
There is a compile time option #define PS in the astrolog.h which can
be commented out to disable the -Xp switch and all PostScript
features. Note that on an X window system one may directly print out
a bitmap to a PostScript printer even without this internal support.
One simply brings up an Astrolog chart in an X window, or creates a
bitmap and displays that bitmap in a window using some other graphics
program, and then uses the Unix command "xdpr" to print it, with a
line such as "xdpr -P<postscriptprintername> -device ps", and then
clicking on the window to print it to the specified printer. Of
course, the native PostScript charts will look much smoother.
Special thanks goes to Mr. Brian D. Willoughby (who BTW also lives
really close to where I work, and who helped me restore the files on
my NeXT optical disk after it crashed thereby recovering my only
copies of Astrolog versions 1.00 through 2.00) who wrote the routines
and parts in the xgeneral.c file which deal with PostScript (e.g.
what's the PS command to draw a line, ellipse, filled rectangle,
etc.) Basically, if it's inside #ifdef PS, Brian likely gets credit
for it, for anything else (except the placalc.c file of course, and
the Matrix routines which are marked as so) I'm the one to blame. :)
-XM[0]: Create Windows metafile stroke graphic instead of bitmap.
-XM switch: Yet another graphics format, Astrolog can generate
Windows metafiles. Metafiles are those files (usually with extension
.wmf and often called "pictures" for users) that are frequently used
in Microsoft Windows for clipart and other such things. (Astrolog is
one of the few non-Windows programs which can generate metafiles
internally without relying on Windows itself.)
Like PostScript, metafiles are a "stroke" graphic format. Metafiles
are in binary format unlike the human readable Ascii text in
PostScript files, and hence are smaller in size for the same image.
Although the same chart generated in PostScript and metafile format
will more or less look the same, for PC and Windows users, metafiles
are preferred. (For Unix systems PostScript is preferred since there
aren't many Unix apps out there that know or care about Windows
metafiles, while PostScript is a standard used everywhere.) A
metafile can be inserted as a picture into Word, CorelDraw, and
pasted into Windows Write and many other applications. Unlike
PostScript, a metafile can be displayed on the screen in your
document, instead of like most EPS files which when displayed by
Windows just indicate that "this is an PostScript image" and have to
be printed to be seen. A metafile can actually be edited in MS Draw
and many other drawing applications where one may modify the Astrolog
chart, change colors, add text, and so on before printing!
Metafiles (and PostScript graphics) have the option to include actual
system fonts for text, as well as even zodiac sign, planet, and
aspect glyphs! This will look smoother than having Astrolog fake all
the characters with 45 degree line segments. There is a setting in
the astrolog.dat file which when set by the user will always use
system fonts instead of simulating them. If the -XM switch is invoked
as -XM0 instead, the status of this flag will be toggled for the
chart generated. (This switch can be used with PostScript charts by
specifying "-XM0 -Xp".) In the PostScript charts, the following
printer fonts are used: Courier for text, Times Roman for house
labels, and Astro for Sign, Planet, and Aspect glyphs.
For these metafiles, the following Windows TrueType fonts are used:
Courier-New for text, Times New Roman for house labels, Wingdings for
sign glyphs, and Astro-SemiBold for Planets and Aspect glyphs. All of
these fonts should be installed in your system already except likely
Astro-SemiBold. This font, created by Kenneth Hirst, is available
from the hilbert ftp site in the directory /pub/astrology/Fonts in
the file 6ttfont.zip. To install it on Windows, unzip this file, then
go into the Windows Control Panel and select the Fonts icon. Click on
the Add button and select the file "astro-se.ttf" that was in the zip
archive, and the font will be installed on your system. If it's not
installed, the planet and aspect glyphs will appear as letters. (Hack:
If you can't get access to the Astro font, but still want all the
other fonts to be included, one can set the value of the -YXf "use
actual fonts" setting in astrolog.dat to 2 instead of 1, which will
cause only the planet and aspect glyphs to be simulated by Astrolog.)
It is possible that a metafile using all the system fonts may print
perfectly to a PostScript printer, but an PS file itself won't find
the Astro font. This is because the Astro font may be installed on
your Windows system, but not on the printer itself, and because when
printing a metafile to a printer, Windows will conveniently
automatically embed the necessary font information in what it sends
to the printer if the font isn't already there. Note that one may
actually generate a PostScript chart from a metafile in Windows by
using the Print Manager (or the Setup dialog button available from
within those Windows host applications that use the standard Print
dialog) to set printing to be to an encapsulated PS file instead of
directly to a printer. Of course doing this won't likely be needed
since Astrolog can generate PS files natively.
Like bitmaps, creating metafiles is also efficient in how it uses
memory. Astrolog will attempt to allocate a large buffer for them,
and keep decreasing the amount until it succeeds. (Note that the
related PostScript charts don't need any memory buffers because
they're written to disk while being generated.) There is a compile
time option #define META in the astrolog.h which can be commented out
to disable the -XM switch and all metafile features.
-Xo <file>: Write output bitmap or graphic to specified file.
This switch is used in conjunction with the -Xb, -Xp, or -XM options,
to specify the name of the file to write the graphic image to. If
not included the program will prompt you for the filename before
writing to disk.
-XB: Display X chart on root instead of in a separate window.
For X window systems only, this switch will cause the chart graphics
to be displayed directly on the root window. This action occurs very
quickly since the program does not have to write a separate bitmap
file and call xsetroot -bitmap on it (although one could easily do
this if they want to). For example, one could put the line 'astrolog
-n -XB' in their .xsession file and whenever they log in, their
background will be set to a chart of the current state of the planets!
-Xm: Create monochrome graphic instead of one in color.
For systems without color monitors, the -Xm switch will create all
charts in monochrome B/W mode. One can still generate color bitmap
files on a monochrome system, just can't properly display them of
course.
-Xr: Create chart graphic in reversed colors (white background).
Normally the charts comes up white on a black background. To get the
chart or bitmap displayed in reverse video (black on white), use this
-Xr switch.
-Xw <hor> [<ver>], -ge[..]: Change the size of chart graphic.
The default graphic chart size is 480x480 units. This can be changed
with the -Xw switch. -Xw with one argument n will make an n by n
chart; -Xw with two arguments x and y will make an x by y image.
Note that this switch will not affect astro-graph or aspect grid
windows; to change the size of these use -Xs below.
For X window systems only, Astrolog accepts the standard -geometry
switch (which can be abbreviated as -geom or anything starting with
-ge). This is only an alias to this -Xw chart size switch, in that it
takes the same parameters in the same way. PC graphics charts may be
automatically sized to the dimensions of the screen by passing zero
to either or both parameters of the -Xw switch. (Without this, to
fill the screen or prevent clipping, one would have to find out the
dimensions of whatever graphics mode beforehand, or manually press
the 'B' key to do the same thing.) If -Xw is passed zero under X
Windows, it will use the compile time default window size.
-Xs <100,200,300,400>: Change the size of map or characters by %.
Note that the size of the planet and sign glyphs don't change when
you change the size of a graphics chart. This can cause problems for
very small charts where the glyphs overlap the rest of the chart and
for very large charts where there is lots of excess space. The -Xs
switch can be used to change the size of all glyphs. The valid values
that can be passed to it are 100, 200, 300, and 400 where 200 is the
default. Note that this switch is used to change the size of the
astro-graph (and aspect grid) graphic charts (because the world map
is considered to be one giant glyph by the program.)
-Xi: Create chart graphic in slightly modified form.
Certain people have asked that some of the graphics charts be modified
in various minor ways, i.e. in either adding or removing certain
information. Rather than add a new hard to remember minor option for
each change, I have added one major switch which covers all the
charts. The -Xi switch will invoke this "induce/inhibit information"
option, and pressing the 'i' key in a window will accomplish the same
thing by toggling the mode's status. By default, all the charts are
as before, but when this bonus option is set, it affects each graphic
chart in a different way, as follows:
o For the standard -v and relationship -r0 -v wheel charts, it will
inhibit the display of the aspect grid in the center - useful for
speed or when doing large time lapse animations when it would get in
the way.
o For the -g aspect grid, it will flip the aspects and midpoints across
the center diagonal, i.e. the midpoints will be below it and the
aspects above it, instead of the other way around. For the -r0 -g
relationship aspect grid, the entire grid will be replaced with one
showing all midpoints between all the objects in the two charts.
Note: The -g0 switch when combined with -r0 will also generate a
relationship midpoint (as opposed to aspect with just -g) grid.
However, this will revert back to the aspect grid if both -Xi and -g0
are in effect with -r0.)
o For the -Z horizon chart and -S space chart, it will, for the major
planets, increase the size of the "points" showing where each object
actually is, making a brighter "spot", for easier viewing; combine
this in the horizon chart with the 'l' key label inhibitor and get a
very realistic view of the night sky, with planets brighter and all.
o For the -L astro-graph chart, this will eliminate the display of the
Ascendant, Descendant, and Nadir lines, leaving just the vertical
Midheaven lines and zenith points, for a remarkable increase in speed
and much less clutter when including many objects.
o For the -XW world map display, this will show the Earth's ley line
locations by drawing them on top of the map. Familiar with ley lines?
They are lines of energy crossing the Earth. I was experimenting
earlier with the master ley line grids on the Earth (in the pattern of
an overlapped 20 sided Icosahedron and 12 sided Dodecahedron) and I
figured Astrolog with its world map would be an interesting program to
explore this with. Actually this is mainly a hack, and belongs more to
the field of dowsing than to astrology, but I figured I would leave it
in there for amusement and inspiration.
Hackers note: there is an interesting "bug/feature" that can arise
with the -XW as well as the -XG (and -XP, described below) switches:
These displays can be brought up in a window without having to
specify an actual chart. Now suppose one presses 'V', 'L', etc. to
bring up a chart - what will be displayed? The answer will be
whatever initial values were already there, and if you're curious,
it's set to be my own birth data: 11:01am PST (8 hours before GMT) on
Friday, November 19, 1971 in Seattle, WA (122W20 47N36). This info
can also be brought up by accessing the "-i nul" virtual chart
straight from the command line before any other switches.
o For the -XP polar globe view, this will show the southern hemisphere
instead of the northern.
o For the -XG globe display, it will display the zenith locations of all
planets (and stars if -U in effect) on the globe, i.e. where on the
Earth each object could be viewed by looking straight up. This on the
globe display is almost identical to the astro-graph chart without its
various lines, except of course that the projection of the world map
is different. It's also similar to the -Z horizon display, except that
it's free from the distortion of projecting the celestial sphere upon
a plane, so it has use to star gazers. However, animation mode here
will still only affect what part of the Earth is viewable, and won't
update the chart from which the zenith locations were obtained.
o For the -E and -Ey graphical ephemeris displays, it will exclude
showing the Moon, which is commonly desired because its line moves
across the ephemeris chart so much faster than any of the other planets.
-Xt: Inhibit display of chart info at bottom of graphic.
Normally, at the bottom of any chart graphic is printed some header
information listing the date, time, and location of the chart in
question (unless the info is already being shown in a sidebar). One
can inhibit this display by specifying the -Xt switch.
-Xu: Inhibit display of a border around graphic.
This switch toggles off the border setting that is also interactively
toggled by pressing the 'b' key when a graphics screen is up. This
switch allows one to toggle the border for graphics files as well as
set the default for this in the astrolog.dat file.
-Xl: Inhibit labeling of object points in chart graphic.
This switch will inhibit labeling with glyphs or text abbreviations,
the spots indicating the positions of planets in the various graphics
charts. This is just the command line counterpart to the existing
functionality accessed by the 'l' key.
-Xj: Don't clear screen between chart updates, drawing trails.
This switch will toggle on a flag which will cause the graphics
screen to not be cleared on new chart draws. Pressing the 'j' key
interactively will toggle the same setting. This feature is used to
draw "jet trail" streaks on the screen for some charts, such as the
-S orbit and -Z local horizon. If you bring up one of these charts,
turn on the setting, and then animate forward, a "time exposure" can
be done showing the orbits of planets or an object's path across the
sky. (When this is active, entering animation won't automatically
jump to the flicker free mode on PC's, because that would make us
flip back and forth between two pages breaking the continuity of our
"streaks".)
-X1 <object>: Rotate wheel charts so object is at left edge.
Yet another graphics feature, this allows one to effectively rotate
one of the graphic wheel charts so that a particular object is hinged
to the left hand (east) edge of the chart. Given the -X1 switch with
the index value of an object, the wheel is drawn but always rotated
so that the object in question is at the left side of the chart. By
default we have the ascendant at the left edge, of course. This is
useful for tracking important planets so one knows where they are,
but yet doesn't distort the house cusps as the -1 switch does.
-X2 <object>: Rotate wheel charts so object is at top edge.
This is identical to the -X1 switch above except here we rotate the
entire graphic wheel so the object in question is always at the top
of the chart. Note that during a day, the degree difference between
the Ascendant and Midheaven varies in most house systems, so that
with the Ascendant hinged at the left edge, the Midheaven will wobble
back and forth near the top of the wheel. If you prefer, "-X2 18"
will fix the Midheaven at the top of the screen, and the chart will
be like before except the Ascendant will be the one to wobble near
the left edge of the chart.
-Xd <name>, -di[..] <name>: Open X window on specified display.
For X windows only, the -Xd <display> switch can be used to change
the display to bring the window up on. Normally, the X window will
always come up on the current display, but we can do things like
"astrolog -Xd machine:0.0" and have the window appear there. In
addition, the program will accept this string through the standard
"-display" (which can be abbreviated as "-disp" or anything starting
with "-di") switch common to most X11 applications.
-XW: Simply create an image of the world map.
Believe it or not, I painstakingly entered the data for the world map
used by the program by hand using an Atlas during a long week. If you
just want to see the map of the world by itself without any
astro-graph lines on it, use the -XW switch.
-XW0: Like -XW but do a non-rectangular Mollewide projection.
The -XW0 switch is just like the normal -XW switch in that it just
displays the world map and nothing else, except that this -XW0 map
generated will be in what's called the Mollewide projection, a good
looking form often used for maps of the world, as opposed to the
standard rectangular map projection used in -XW which distorts the
polar regions of the globe across the top and bottom of the screen.
(The Mollewide projection pinches the polar regions together,
generating a elliptical map, which is similar to the -XG globe
displays, but which shows the whole world instead of just half.)
-XG [<degrees>]: Display the image of the world as a globe.
Once we have the data for the map of the world, there are
several neat things we can do with it; for instance, with a little
trigonometry and clipping, we can bring up a view of a globe, which
is what the -XG switch does. An optional argument will specify a
rotation value in degrees to display different parts of the globe.
(The globe seems to look best for a -Xw window size of around 350.)
Note that the -XW and -XW0 maps can be animated like as this -XG
globe display can. Animation of these maps are done by shifting the
whole map to one side or the other. In fact, such a feature can be
used indirectly to shift one of the X window astro-graph charts
(which are drawn on the world map) from the normal case of having the
date line on the edges of the screen: Go into the world map or globe
display, animate it a bit, and then change graphic modes to display
the astro-graph chart, and it will be shifted by the corresponding
amount. (Note that animating the astro-graph screen itself will
change the chart info, not how the screen itself is done.) Because
the -XW world map, and -XP polar globe display, can be animated just
as the -XG general globe display can, the -XW and -XP switches accept
optional parameters on the command line that will specify what degree
(from 0 to 359) to start the map at, just like the -XG switch does.
In addition, the -XG option itself accepts a second optional
parameter, which is the starting angle for the globe's tilt, from -90
to +90 degrees.
-XP: Like -XG but create the globe from a polar projection.
The -XP option will generate a polar view of the Earth as a globe.
This is like the -XG globe option except that the view is always from
the top (or bottom). By default, the view is looking down on the north
pole with 0 deg W/E toward the bottom of the screen. (Animation mode
will cause the view to spin about the center of the screen.) To see a
view of the south pole hemisphere, go into the bonus information mode
described above ('i' key). Again, like with all the other X window
display modes, one can enter this display with a keystroke: press 'P'
in any Astrolog window and it will revert to this display.
-XF: Display maps as constellations on the celestial sphere.
A graphics chart showing all 88 of the astronomical constellations is
available with the -XF switch. When this mode is active, the -XW
world map and -XG and -XP globe chart modes will draw the outlines of
the constellations on the celestial sphere instead of continents on
the Earth. Pressing the 'F' key when a graphics screen is up will
toggle this setting on. (If you aren't already in one of the map
graphics modes, -XF and the 'F' key will switch to one.) The
constellation maps may be rotated, tilted, and animated and can do
everything else just like the world maps, and depict the sky as if
you were looking up at it from Earth. In the -Xi display modification
mode, the locations of the planets in the current chart will be shown
among the constellations. The constellations are labeled with their
correct abbreviations, and you can see the familiar image outlines
such as the Great Bear, Cygnus, and all the others, as well as the
constellations named after the twelve signs of the zodiac, and how
these astrological signs compare with their corresponding
constellations. I happen to have four planets in my own natal chart
in the constellation Ophiuchus, while there are several other
constellations very close to the ecliptic which planets (other than
the Sun) often enter, e.g. the Moon will technically be in Orion on
September 27th. As with Astrolog's map of the world, I entered the
data describing the irregular shape of each constellation myself, and
the boundaries are accurate although rounded to the nearest degree.
This is a unique feature that isn't in any astronomical programs that
I know of much less astrological! For a demo of this, do "astrolog -i
yourchartfile -XF -XG -Xi -Xn -U" and see a rotating celestial sphere
of the constellations and stars, and where the planets in your natal
chart are located within them.
-Xn [<mode>]: Start up chart or globe display in animation mode.
The -Xn [<value>] option can be used to start up an X window in
animation mode. It a window, one would have to explicitly press 'N' or
a shift+number key to start the window animation. Without a parameter
after -Xn, the option will start it up in continuous update to "now"
mode (which is like pressing 'N' in that any chart will be erased with
the current chart now.) The switch can accept parameters from 1..9,
corresponding to the animation rates obtained by pressing shift 1..9
in the window, i.e. update whatever chart is passed to it seconds,
minutes, hours, days, months, years, etc. later each time.
-HX: Display list of key press options for screen graphics.
This switch prints out the list of keys one can press when a graphics
screen is being displayed. This list may also be obtained by pressing
the '?' key interactively when graphics are actually up. With -HX,
this may be done anytime and be printed out or sent to a file like
all other Astrolog tables.
--
Astrolog (version 4.40) obscure command switches:
-Y: Display help list of less commonly used command switches.
This switch was already described in an earlier section.
-Yn: Compute location of true instead of mean node.
This switch allows you to set whether the North Node in Astrolog
(object number 16) is the Mean or the True node of the Moon. The mean
Node is the default, but toggling on the -Yn flag will do the True
node. (The default may also be set at compile time via the TRUENODE
#ifdef.)
-Yd: Display dates in D/M/Y instead of M/D/Y format.
This is a switch which determines whether dates are displayed in
Month/Day/Year order or in the more "European" Day/Month/Year format.
Toggling on or off this flag will specify the DMY or MDY format
everywhere in the program from text wheel charts to transit charts to
the chart info displayed in graphics charts.
-Yt: Display times in 24 hour instead of am/pm format.
This is another option which is just like the above except that it
affects how times are displayed throughout the program. When clear,
times will be printed in am/pm format, while when set they will be in
the more "European" 24 hour clock.
-YC: Automatically ignore insignificant house cusp aspects.
This option toggles on a useful flag to automatically prevent display
of irrelevant or redundant aspects involving house cusps, processing
them in a more intuitive manner. This affects charts such as -t
transit search lists, -T transit influence charts, and -a aspect
lists. First, aspects other than conjunctions to minor cusps will be
ignored, e.g. a sextile to the 12th house cusp is redundant and isn't
really useful, as we are more interested in the conjunction to the
2nd house. Minor aspects to the angles such as the Ascendant and
Midheaven are left alone. The setting also prevents redundant aspects
to two items that are always opposite each other, e.g. if a transit
list shows a trine to the Midheaven, it won't show a sextile to the
Descendant right next to it.
-Y8: Clip text charts at the 80th column.
This setting when active will stop printing lines of text within
charts if they're long enough to go beyond the right edge of the
screen. This can be used to prevent text from wrapping around the
screen to the next line. By default, with all objects unrestricted,
certain charts will have rows more than 80 columns wide, which can
break up the chart making it difficult to read, e.g. the -r0 -g
relationship aspect grid, the -E ephemeris listing, and the -L
astro-graph columns when uranians are included. With this option on
however, these and any other charts that can go beyond column 80,
will always be displayed on one line, with columns that would go
beyond the 80th not getting printed. Note that this setting can
actually clip at any column instead of just the 80th, where the
screen width value used is the same as used for interpretation
formatting, i.e. the optional parameter to the -I switch.
-YQ <rows>: Pause text scrolling after a page full has printed.
This feature gives you the option to have Astrolog automatically stop
whenever the screen gets filled with text and prompt before scrolling
to the next page. It takes one parameter to define the number of rows
to print before prompting the user to press return to continue. If
set to zero, the feature will be turned off and Astrolog will print
continuously until done. This helps those who may be concerned about
the program scrolling things off the screen before they can read it.
Without this one would have to press Ctrl-S to have the system pause
printing, send output to a file, or be on a system with scrollbars to
see everything. This feature is on by default and set to 24 lines,
although this can be changed easily in the astrolog.dat file. When
the program is paused, one can type a couple things before pressing
return: Entering 'q' will terminate the program, entering 'Q' will
turn off the feature and scroll until done, '8' will toggle the right
hand column clipping setting, and 'k' will toggle the Ansi color
setting.
-Yo: Output chart info and position files in old style format.
Astrolog can still read in all old style -o info and -o0 position
chart files generated by previous versions of the program without
problem. Not only that, but it will write out these old formats too
if the -Yo switch is put into effect. When set, it will output -o and
-o0 files exactly as in version 4.10 and before, in simple lists of
numbers in fixed fields instead of in generic command files.
-YP <-1,0,1>: Set how Arabic parts are computed for night charts.
This is an obscure option allowing one to force whether night chart
formula inverting is done in the -P Arabic part chart list, since
sources differ on which parts are best inverted. This option takes
one parameter, either -1, 0, or 1. Zero is the default setting,
meaning the program will invert only those parts that have the flip
flag set, for charts cast at night. If the setting is 1, then no
inverting will ever be done for any part, even in night charts. If
the setting is -1, then inverting will always be done for every part,
even in day charts. The last setting will even invert the computation
of the Part of Fortune, i.e. object 18, in the main object list. Note
that the POF does appear both in the -P full part list, as well as
being the only part that's also a standard object, meaning it's the
only part one may automatically do aspects or transits to. Note also
that the -P list POF inverts for night charts, while the standard
object doesn't; the -P full part feature was introduced in Astrolog
later and I didn't want to change the computation of the older POF.
-YE <obj> <semi-major axis> <eccentricity (3)> <inclination (3)>
<perihelion (3)> <ascending node (3)> <time offset (3)>
Change orbit of object to be the given elements.
This feature allows one to "define their own planets", by changing
the orbital elements of one of Astrolog's objects. This switch takes
17 parameters, which specify all the data needed for any elliptical
orbit around the Sun. The parameters are as follows: First is the
object to redefine; second is the semi-major axis of the new orbit,
in AU; next are three parameters for the eccentricity of the orbit's
ellipse; next are three parameters for the inclination of the orbit
with respect to the ecliptic, in degrees; next are three parameters
for the argument of perihelion, which is the "rotation" of the orbit
in degrees or how far away its perihelion is from zero Aries; next
are three parameters defining the ascending node, which is the "tilt"
of the orbit or how far away the point where the orbit intersects the
ecliptic is from zero Aries; finally are three parameters for the
"mean anomaly" which is basically where on the orbit the planet is at
a reference time and how fast it moves along it. Many of the above
element settings take three values when it seems like only one is
needed. The second and third values are used as linear and quadratic
error factors to the first, and can be zero unless every last bit of
accuracy that can be provided outside of ephemeris files is needed.
Note that these parameters basically replace the same elements as
used in the old Matrix formulas. This means the -YE switch settings
are ignored when the -b ephemeris flag is in effect. Note also that
the Matrix formulas have special error factors applied on top of
their main elements for Jupiter through Pluto, hence it's recommended
to only redefine asteroids, uranians, or inner planets. The following
example will roughly move Venus into Earth's orbit: "-YE 4 1 0 0 0 0
0 0 0 0 0 0 0 0 0 0 23000".
-YR <obj1> <obj2> <flag1>..<flag2>: Set restrictions for object range.
This is like the -R switch except that it explicitly sets the
restrictions for a range of Astrolog objects instead of just one. The
first two parameters specify the lower and upper object bounds, and
are followed by zero or one flag parameters to clear or set the
restriction status of each object within the range.
-YRT <obj1> <obj2> <flag1>..<flag2>: Transit restrictions for range.
This behaves exactly like the -YR switch above except it affects
transit restrictions, like how the -RT switch is to -R.
-YR0 <flag1> <flag2>: Set restrictions for sign, direction changes.
This sets the restriction status for sign and direction changes. It
takes two parameter flags, with the first setting for sign changes,
and the second direction changes. This affects the -d daily event
searches, and works like the -R restrictions but for all types of
these special events, instead of all aspects or all events containing
a particular object.
-YAo <asp1> <asp2> <orb1>..<orb2>: Set aspect orbs for range.
This is like -Ao but sets the orbs for a range of Astrolog aspects
instead of just one. The first two parameters specify the lower and
upper aspect index bounds, and are followed a list of orb values for
each aspect in the range.
-YAm <obj1> <obj2> <orb1>..<orb2>: Set max planet orbs for range.
This is like -Am but sets the maximum aspect orbs allowed to a range
of objects instead of just one. Again, the first two parameters are
the lower and upper object indexes, followed by the list of max orb
values.
-YAd <obj1> <obj2> <orb1>..<orb2>: Set planet orb additions for range.
This is like -Ad but sets the planet orb addition values for a range
of objects instead of just one. Again, the first two parameters are
the bound indexes, and are followed by the list of planet orb
additions.
-Yj <obj1> <obj2> <inf1>..<inf2>: Set influences for object range.
This sets the powers or influences of the given range of planets,
when considered in a natal chart, as used in charts such as the -j
influence chart, -a aspect influence list, and -T transit influence
list.
-YjC <cusp1> <cusp2> <inf1>..<inf2>: Set influences for house cusps.
This sets the influences for the given range of houses, as used in
charts such as -j.
-YjA <asp1> <asp2> <inf1>..<inf2>: Set influences for aspect range.
This sets the influences for the given range of aspects, as used in
charts such as the -j influence chart, -a aspect influence list, and
-T and -D transit lists.
-YjT <obj1> <obj2> <inf1>..<inf2>: Set transit influences for range.
This sets the influences of the given range of planets, just like
-Yj, except here for when the planets are transiting, as used in
charts such as the -T transit and -D external planets influence lists.
-Yj0 <inf1> <inf2> <inf3> <inf4>: Set influences given to planets
in ruling sign, exalted sign, ruling house, exalted house.
This switch takes four parameters and sets respectively, the extra
influences given to a planet when it's in the sign it rules, when
it's in the sign it exalts in, when it's in the house corresponding
to the sign it rules, and when it's in the house corresponding to the
sign it exalts in. These values are used in examples such as the -j
influence chart.
-YI <obj> <string>: Customize interpretation for object.
-YIa <sign> <string>: Customize interpretation adjective for sign.
-YIv <sign> <string>: Customize interpretation verb for sign.
-YIC <house> <string>: Customize interpretation for house.
-YIA <asp> <string>: Customize interpretation for aspect.
-YIA0 <asp> <string>: Customize aspect interpretation statement.
You can customize the core phrases as used in Astrolog's
interpretations. All these switches take two parameters: the index of
the item to change, and the string to set it to. (You probably want
to enclose any strings in quotes so they are treated as a single
parameter and not split at the spaces.) The things that can be
changed and the switches to do them follow:
o -YI <obj> <string>: This sets the meaning for the given planet or
object, i.e. the part of one's mind the planet represents. For
example, the default setting for Jupiter would be: -YI 6
"enthusiastic, faithful, wise, expansive, spontaneous nature".
o -YIC <house> <string>: This sets the meaning for the given house,
i.e. the area of life that house represents. For example, the default
for the first house is: -YIC 1 "establishment of personal identity".
o -YIa <sign> <string>: This sets the characteristics for the given
sign, i.e. adjectives describing it. For example, the default for
Gemini is: -YIa 3 "inquisitive, witty, perceptive, adaptable".
o -YIv <sign> <string>: This sets the desires for the given sign, i.e.
verbs describing what something characterized by it seeks. For
example, the default for Virgo is: -YIv 6 "works toward perfection".
o -YIA <asp> <string>: This sets the meaning for the given aspect, i.e.
the type of interaction going on when the aspect is in effect. For
example, the default for the Trine is: -YIA 4 "is in harmony with".
Special note for hackers: If the optional characters "%s" appear in
the given string anywhere, Astrolog will replace them with an
appropriate adverb indicating how strong the effect of the aspect is
(and include the trailing space). For example, the real default for
Trine is: -YIA 4 "is %sin harmony with", where the "%s" will is
replaced with "always ", "somewhat ", etc, as appropriate.
o -YIA0 <asp> <string>: This sets the conclusion for the given aspect,
i.e. an additional sentence about it. For example, the default for
the Opposition is: -YIA0 5 "Adaptation is required by both sides".
-YkC <fir> <ear> <air> <wat>: Customize element colors.
-YkA <asp1> <asp2> <col1>..<col2>: Customize aspect colors.
-Yk0 <1..7> <1..7> <col1>..<col2>: Customize 'rainbow' colors.
-Yk <0..8> <0..8> <col1>..<col2>: Customize 'general' colors.
Astrolog can customize the colors as used for almost anything in the
program. A color may be set to any one of 16 values, represented by
the numbers 0 to 15, which are: 0 - Black, 1 - Maroon, 2 - DkGreen, 3
- Orange, 4 - DkBlue, 5 - Purple, 6 - DkCyan, 7 - LtGray, 8 - DkGray,
9 - Red, 10 - Green, 11 - Yellow, 12 - Blue, 13 - Magenta, 14 - Cyan,
15 - White. When entering a color as a parameter, use the correct
number above, or else type the color's name as printed above (which
may be abbreviated to the first three characters). The switches to
change color settings are below.
o -YkC <col1> <col2> <col3> <col4> switch: This switch defines the
colors used for the four elements, and takes four parameters, for
fire, earth, air, and water, in that order. The colors used for
planets are based on the element of the sign they rule, so this
affects the colors of the main planets too. For example, to make
earth be green and air yellow, instead of the other way around as
Astrolog used to always force, do "-YkC 9 10 11 12" or "-YkC Red
Green Yellow Blue" or just "-YkC red gre yel blu".
o -YkA <asp1> <asp2> <colors> switch: This defines the colors used for
a range of aspects. The first two parameters are the lower and upper
indexes of the aspects to modify, and are followed by one color
parameter for each aspect in the range. For example, to highlight
Trines by making them white and all the other major aspects dark
blue, do "-YkA 1 5 dkb dkb dkb whi dkb".
o -Yk0 <val1> <val2> <colors> switch: This sets a range of colors used
other places in the program (excluding elements and aspects) whose
default colors are one of the colors of the rainbow. The first two
parameters are values from 1 to 7 indicating the lower and upper
bounds of the default colors to redefine, and are followed by new
actual colors to use instead. The seven indexes represent the colors
Red, Orange, Yellow, Green, Cyan, Blue, and Purple. For example, if
you want to change the color used for the Uranians from their default
of purple to orange, do "-Yk0 7 7 orange" and you've effectively
"redefined the color purple".
o -Yk <val1> <val2> <colors> switch: Like -Yk0 above this also sets a
range of colors as used many places in the program, except this
allows one to redefine all the standard or obscure colors (i.e. the
other nine that aren't one of the rainbow colors covered above).
Again the first two parameters indicate the range of colors to change
which are from 0 to 8, and are followed by the new colors to use. The
nine indexes represent in order the colors Black, White, LtGray,
DkGray, Maroon, DkGreen, DkCyan, DkBlue, and Magenta. For example, to
change the highlight color as used in graphics charts to draw borders
and the like from LtGray to Yellow, do "-Yk 2 2 yellow". (Note that
you can use this to even "change" the colors Black and White to draw
graphics on whatever background color you want.)
-YXG <0-2><0-2><0-2><0-3>: Select among different graphic glyphs
for Capricorn, Uranus, Pluto, and Lilith.
Astrolog has the ability to choose between different common glyphs
for various astrological symbols. One may optionally display charts
with the "European" version of the Capricorn glyph, instead of the
more twisty "American" type glyph. One may display charts with the
"astronomical" version of the Uranus glyph using a dotted circle with
an ascending arrow, instead of the more astrological "Herschel" glyph
with the crescent bounded cross over a circle. One may display with
the "astronomical" version of the Pluto glyph as the "PL" initials,
instead of the more "astrological" version with the circle over
crescent over cross. Finally one may choose to display Lilith as a
small reversed crescent instead of as a circle with a line through
it. The -YXG switch changes the glyphs to use for these signs and
planets that may be drawn in more than one way. It takes one
parameter, a four digit number specifying the glyphs to use for
Capricorn (1000's place digit), Uranus (100's place), Pluto (10's
place), and Lilith (1's place). For each position, the digit "0"
means to leave a glyph alone, while "1" means set to what's generally
considered the "American" form, and "2" means to what's generally
considered a "European" form. (For Lilith only, one may also choose
the digit "3", which is the "U" shaped South Node glyph.) For
example, "-YXG 0120" leaves the glyphs for Capricorn and Lilith at
their present setting, sets Uranus to be the "Herschel" glyph, and
Pluto to be the astronomical "P" glyph. The default selection is
"1111", but many astrologers on the Eastern side of the Atlantic may
prefer "2222".
-YXg <cells>: Set number of cells for graphic aspect grid.
This sets the size of the graphic -g aspect and midpoint grids, i.e.
the number of cell rows and columns available to draw items in.
Aspect grids by default are always 20 by 20 cells (21 by 21 for the
-r0 relationship comparison grids counting the index row) to account
for the default number of objects active. If this size value is too
high (or objects are restricted), there will be unused rows at the
bottom, while if it's too low (or objects are added), rows will be
clipped off the bottom.
-YXf <val>: Set usage of actual system fonts in graphic file.
This sets whether or not actual system fonts (instead of Astrolog's
vector graphics) are used for glyphs and text in PostScript and
Windows metafile graphics files. Zero means no system fonts, while
one means use Courier, Wingdings for metafiles, and the Astro font.
(This can also be set to the hack value of two if you don't have the
Astro font, which means don't try to use this system font but do use
all the others.)
-YXp <-1,0,1>: Set paper orientation for PostScript files.
This allows one to set the page orientation for full PostScript
graphics files as generated with the -Xp0 switch. If the orientation
parameter value is positive, that means the chart will be printed in
portrait mode, while if negative, it will be in landscape mode. If
the orientation value is set to zero (the default), then the program
will decide based on the size of the current chart, with charts with
wider horizontal sizes (e.g. astro-graph charts and wheel charts with
sidebars) being in landscape, and charts with horizontal sizes less
than or equal to the vertical (e.g. aspect grids and wheel charts
without sidebars) being in portrait.
-YXp0 <hor> <ver>: Set paper size for PostScript files.
One may also choose the paper size of full -Xp0 PostScript graphics
charts. There are two parameters given which specify the horizontal
and vertical size in inches of the paper to be printed upon. By
default this is 8.5" x 11". If you have say 8.5" x 14" legal size or
A4 paper in your printer it can be used just as easily. (Note: It's
possible that at least some systems or drivers may clip all graphics
beyond 8.5" x 11", but excluding any external restrictions Astrolog's
PostScript should allow one to go beyond these limits.)
-YX <hi-res> <lo-res>: Set modes to use for PC screen graphics.
For PC's with graphics only, this sets the two graphics modes as used
when displaying charts on the screen. The two parameters specify the
mode number to use as the default "hi-resolution" mode, and the
"flicker-free" mode used for animations.
-;: Ignore rest of command line and treat it as a comment.
The -; "dash semicolon" switch when encountered causes all the rest
of the switches on a command line to be ignored and not processed.
This allows the semicolon (usually used by itself without the
optional dash prefix of course) to be used to begin comments and for
comment lines in the various command files.
--
Astrolog graphics screen key press options (version 4.40):
(Note: When a graphics chart is up, pressing a key which doesn't
do any of the operations below will sound a beep.)
Press 'H' or '?' to display this list of key options.
The most important key, of course. Pressing this will display a help
list of all the key presses available in the text screen from which
the window was invoked from.
Press 'p' to toggle pause status on or off.
Press this to pause all automatic updates to the window or screen.
This is mainly used to temporarily freeze any animation (see below)
so a particular chart can be looked at without interruption. When
animation is on but temporarily paused with this key, the mouse
(inactive for the purpose of scribbling during animation) will come
active again. Related to this, the number keys which set the rate of
animation, but for PC's scroll the chart when not in animation mode,
will do the scrolling instead of setting the rate when animation is
paused then.
Press 'x' to toggle fg/bg colors on screen.
Pressing this will invert the colors on the screen, or in other
words will do the same thing as the -Xr switch on the command line.
Press 'm' to toggle color/monochrome display on screen.
For color displays, pressing this key will toggle in and out of
monochrome mode.
Press 'i' to toggle status of the minor chart modification.
Pressing this key will toggle whether or not an alternate form of the
present chart should be displayed. See the -Xi switch described
earlier for more information on these alternate chart formats.
Press 't' to toggle header info on current chart on screen.
Pressing the 't' key will toggle whether or not the chart parameters
are printed at the bottom of the window or in a sidebar. This
corresponds to the -Xt switch mentioned earlier.
Press 'b' to toggle drawing of a border around the chart.
This key, when pressed when a graphics chart is being displayed, will
toggle whether or not a border is drawn around the graphic. Some
charts, such as aspect grids, will always have a border regardless of
the state of this flag, while others such as the globes will never
have one. Most charts however, such as the wheel charts will look
good either way and this key can be used to choose.
Press 'l' to toggle labeling of object points in chart.
Press the 'l' key in a window to inhibit the labeling of all planets
in the various charts. Instead of drawing the actual little point and
then the glyph near it (as well as sometimes a line from the glyph to
the dot), just the point is displayed. This mode is mainly useful for
the -Z horizon and -S space charts (and has little use for anything
else) when in cramped quarters or to get a more realistic view of how
the sky actually looks.
Press 'j' to toggle not clearing screen between chart updates.
This key toggles on the "jet trails / time exposure" flag which will
cause the graphics screen to not be cleared on new chart draws. See
the -Xj switch which affects the same setting for more info.
Press 'v' to display current chart positions on text screen.
Press this key to dump back to the text screen the list of where all
the planets currently being displayed in the window are. This display
is the same as produced with the -v switch, and is useful if one wants
text to show where everything in the chart is.
Press 'R', 'C', 'u', 'U' to toggle restriction status of minor
objects, minor house cusps, uranian planets, and stars.
Press the 'R' (restrict) key in an Astrolog graphics screen and the
chart will be redrawn with the restriction status of the asteroids
and other minor objects toggled. Pressing the 'C', 'u', and 'U' keys
in the window will toggle the restriction status of the four minor
house cusps, the uranian planets, and the fixed stars, respectively.
These keys compliment the 'R' key option and are the counterparts to
the -C, -u, -U, and -RC, -Ru, -RU switches. (Note that for the 'C',
'u', and 'U' keys, toggling their state off will automatically
restrict all the objects associated with them, while the 'R' key can
simultaneously restrict some and unrestrict other bodies.)
Press 'c' to toggle relationship comparison chart mode.
This key, when pressed when a graphics chart is being displayed, will
toggle the state of whether a relationship comparison chart (-r0) is
being shown. For example, pressing it when a wheel chart is up will
revert to a dual wheel chart showing two sets of planets, while
pressing it when an aspect grid is up will revert to a dual aspect
grid between the planets of two different charts. When going from a
comparison to a single chart, one of the charts will be used while
the other thrown away. When going from a single to a comparison, the
same chart information will be put in both (which won't be too useful
until they are made different through animation or other keypresses).
Press 's', 'h', 'f', 'g' to toggle status of sidereal zodiac,
heliocentric charts, domal charts, and decan charts.
Press the 's' key in the window to toggle whether or not the sidereal
vs. tropical zodiac is used. Press the 'h' key to toggle to a
heliocentric based chart or back again to a geocentric one. Press the
'f' key to toggle the status of whether or not the chart should be
modified to correspond to the appropriate domal chart (where the
house positions are represented as zodiac positions and vice versa).
Press the 'g' key to toggle the status of whether or not the chart
should be modified to correspond to a decan chart (where each sign is
divided in thirds representing the two other signs in its element).
These keys of course correspond the -s, -h, -f, and -3 options,
respectively.
Press 'O' and 'o' to recall/store a previous chart from memory.
Have you ever animated your natal or some other chart to some far
distant future or past time, only then to wish you could somehow
easily get back in time to the original chart? You can, by pressing
the 'O' key in a window, which will recall to the screen previously
"saved" chart parameters (which are by default set to whatever you
started the window with.) Press the 'o' key to change this default
stored chart to be the chart that is presently in the window.
Press 'B' to dump current window contents to root background.
Press the 'B' key in an X window to dump whatever is currently being
displayed to the background root window. This is basically the
corresponding keypress to the -XB option.
Press 'B' to resize chart display to full size of screen.
For PC systems, the 'B' key does a different function that the
feature shown above. See PC graphics section for its description.
Press 'Q' to resize chart display to a square.
One can manually resize the Astrolog X Windows using a window manager
(except when a world map or aspect grid is displayed, in which case
any resizing will have no effect). Pressing the 'Q' key will
automatically resize any (non-world map) window to be a square. This
is useful, after resizing charts to approximately the size you want,
to make them precise squares. Note that for PC's, this will take EGA
and CGA mode pixel ratios into account, in that the horizontal and
vertical sizes may be made different in order that the actual display
looks square. This will also take into account wheel chart sidebars
and only resize the actual visible chart to a square when one is
being displayed to prevent distortion.
Press '<' and '>' to decrease/increase the scale size of the
glyphs and the size of world map.
This two keys will respectively decrease and increase the size of the
sign and planet glyphs (as well as resize the astro-graph and aspect
grid charts) through the three scale factors available. After resizing
the window, you will probably want to use these keys if the glyphs are
then too big or small for the new chart.
Press '[' and ']' to decrease/increase tilt in globe display.
'[', ']' keys: Not only can the globe display be rotated, but the
poles can be tilted down at various angles! (This basically makes the
-XP polar globe view option obsolete; it's still in there only for
backwards compatibility.) Press the '[' and ']' keys when the globe is
being displayed to respectively "pull down" and "push back up" the
angle of the polar axis from which the globe is viewed. Combining
this with the globe rotation allows one to move any point of the globe
to the center of the screen.
Press '+' and '-' to add/subtract a day from current chart.
These keys, when pressed when a graphics chart is being displayed,
will update the current chart forward or backward one day (actually
1..9 days based on the current animation rate). When animation mode
itself is active, these keys will jump by the current animation step,
instead of only an amount in days.
Press 'n' to set chart information to current time now.
This key, when pressed when a graphics chart is being displayed, will
change the current chart (or "outer" chart when a -r0 comparison
chart is up) to the current time and place now. This interactively
does the same as the -n command line switch. The only other way to
revert a graphics chart to the time "now" is to enter animation mode
via the 'N' key and then leave it, so this is a shortcut convenience.
(This feature is only available when the TIME compile time value is
uncommented of course.)
Press 'N' to toggle animation status on or off. Charts will
be updated to current status and globe will rotate.
Animation! This key will toggle in and out of a mode where the chart
is continually updated in the window. Entering the animation mode
will cause the chart being currently displayed to be replaced by the
chart for the exact moment at the time you are running the program.
Every second or two, the chart will be updated to reflect the new
current state of the planets and houses. For large window sizes, one
can actually see very minor changes in the chart every few seconds.
With the text 'T' mode in effect, the chart is basically an advanced
version of xclock, and makes a good window to be left running on
your display. If you are in the -XG globe display mode, pressing
the 'N' key will cause the globe to rotate for an impressive display!
Press '!'-'(' to begin updating current chart by adding times.
!: seconds, @: minutes, #: hours, $: days, : months,
^: years, &: years*10, *: years*100, (: years*1000.
These nine keys (i.e. shift plus the number keys from 1..9) enter
into a different form of chart animation. Pressing them will cause the
current chart being displayed (i.e. it will not revert to the current
planet positions) to continually have a delta time added to it and be
recast and shown. Pressing '!' will have one second added to the chart
for every update (slow action unless you have a very fast system - the
animation will be even slower than for the 'N' key). Pressing '@' will
have one minute added to the chart each time, which makes for a nice
display (note that you will definitely want to be in the text 'T' mode
for these animations so you can see what times in the future these
charts are being cast for. Pressing '#" will have one hour added each
time (note that now the house cusps are starting to move quickly, so
you may want to switch to a different system of houses (such as the
Equal to keep the Midheaven from flopping back and forth) and/or use
-1 to put an object like the sun on the Ascendant.) Pressing '$' will
have one day added each time (now you will probably want to start
using -R to remove fast moving objects like the moon), and pressing
'%' will have one month added for each update of the window. The
final keys, shift 6..9 cause years, decades, centuries, and millennia
to be added each time, and tend to only be used to look for long range
actions (when will Neptune next enter Pisces, etc.) To exit these
animation modes, press the 'N' key.
Press 'r' to reverse direction of time-lapse or animation.
Press this to reverse the direction of any animation taking
place. For the '!'..'(' animation keys above, this will cause
negative times to be added to the chart, e.g. pressing '#'
then 'r' on a chart cast for noon will cause the next chart to
be displayed for 11am, then 10am, etc. For the Globe animation,
this will cause the rotation to reverse direction.
Press '1'-'9' to set rate of animation to 'n' degrees, etc.
The nine number keys are used to set the relative "rate" of
animation to "n" whatevers. For example, normally the "@" key means
add one minute to the chart for each update, but press "5" and now
we are adding 5 minutes each time. For the Globe animation,
by default the Earth rotates one degree each time; however, the
number keys can speed this up to nine degrees for each update.
Press '1'-'9' to determine section of chart to show if clipped.
For PC systems only, see the section on PC graphics for this
additional feature accessed through the number keys. Note when
pressing numbers to set the animation rate or the section of a PC
graphics screen to view, the numeric keypad will work for PC's even
if numlock isn't on. It would be annoying to press a number on the
keypad only to pass some random characters to Astrolog because you
forgot to turn on numlock.
Press 'V','L','A','Z','S','J','K','E','W','G','P' to switch to
normal (-v), astro-graph (-L), grid (-g), local (-Z),
space (-S), dispositor (-j), calendar (-K), ephemeris
(-E), world map (-XW), globe (-XG), and polar (-XP) modes.
There are basically eleven main modes in which the graphics screen
can be in: There are the eight main charts (wheel, astro-graph,
aspect grid, local sky, space view, dispositor, calendar, and
ephemeris) as well as the three world displays (the simple map by
itself, the globe view, and the polar projection). These eleven keys
can be used to switch between these modes in the middle of program
execution. For example, you can bring up your own chart in a window,
then press 'L' to see the astro-graph chart for the same birth data.
Then you can press 'W' to just see the world map by itself, and 'G'
to see the globe view, after which you can press 'V' to return to
your original wheel chart.
Press '0' to toggle between -Z,-Z0 & -XW,-XW0 & -E,-Ey modes.
When graphics are up on the screen, pressing this key acts similar to
the mode changing keys above that switch between the different
graphic chart types. When pressed, the state of the program being
invoked with -Z vs. -Z0, as well as the state of -XW vs. -XW0, and
the state of -E vs. -Ey, will be reversed. In other words, if I am
viewing the -Z -X horizon chart, and I want to see the -Z0 -X sky
graphic, then I press '0' to go to it. Similarly, this key will flip
me back and forth between the -XW simple rectangular world map
display and the -XW0 Mollewide projection graphic, as well as the -E
monthly ephemeris and the -Ey yearly ephemeris. A bit of a hack, but
useful, and the only way to change these suboptions while the program
is running.
Press 'F' to toggle between world and constellation map modes.
This key toggles on the constellation charts where the map and globe
modes show the celestial sphere instead of the Earth's continents.
See the -XF switch which affects the same setting for complete info.
Press 'F1'..'F12' [plus Shift,Ctrl,Alt] to run macros 1..48.
For PC's, pressing the function keys F1 through F12 will execute
macros when graphics are being displayed. Pressing F1 through F12
will run macros 1 through 12. Pressing Shift+F1 through Shift+F12
will run macros 13 through 24. Control+F1 through Control+F12 will
run macros 25 through 36. Finally Alt+F1 through Alt+F12 will run
macros 37 through 48. Executing a macro that hasn't been defined yet
(either with a function key or the -M switch) will do nothing.
Press 'space' to force update of current graphics display.
When a graphics chart is up on the screen, pressing the space bar
will force a redraw of the chart. This is useful for say to cleanup
after one has scribbled on it with the mouse button features
(described below).
Press 'del' to clear the graphics screen and not redraw.
Pressing the delete key when a graphics screen is up will clear the
screen, but not redraw the chart right away unless animation mode is
on. This is most useful for the -Xj "timed exposure" streaks in
horizon and orbit charts if you want to start a new "jet trail" while
animating.
Press 'tab' to toggle between graphics resolutions.
This feature is only available on PC systems. See PC graphics section
for its description.
Press 'enter' to input a command line of general switches.
Pressing the return key when a graphics screen is up will pause and
prompt you for a command line. This command line will be processed
after which you will be returned back to the graphics state you left,
allowing the changing on the fly of any setting that isn't already
covered by pressing whatever key, without having to drop all the way
back to a -Q loop or out of the program altogether. This can be used
to redisplay the -H switch list too. (There are a couple of rare
things you can't do in the middle of graphics, e.g. you aren't
allowed to suddenly switch to one of the graphics file modes.)
Press 'q' to terminate the window and program.
Pressing this key will exit graphics mode or terminate the window
(and leave the Astrolog program itself.)
--
Left mouse button: Draw line strokes on chart in window.
Middle mouse button: Print coordinates of pointer on world map.
Right mouse button: Terminate the window and program.
Mouse buttons: Pressing the mouse buttons in the X Windows (or on the
screen for PC's) will do various functions. The left mouse button
acts as a pen that allows one to actually draw on the chart: press it
and drag the pointer to draw a line on the window - good for aiding
in analysis or in presentations. (Any scribbles one makes will
disappear the next time the chart window is updated, therefore this
drawing is disabled in animation mode.) The middle mouse button
(right button for PC's) will only work when the world map is shown,
i.e. in the -L astro-graph or -XW world map displays: press it and
get the approximate longitude and latitude of the place on the map
where the pointer is, printed in the main window (or have the current
chart's location set to this for PC's). For the four scale sizes of
100, 200, 300, and 400 percent, the accuracy is to the nearest
degree, 30 minutes, 20', and 15', respectively. So, if you want to
cast a chart for southern Madagascar, Africa, but don't know the
coordinates, click the middle button on the map for a good
approximation! Finally, the right button (middle button if any for
PC's) acts just like the 'q' key, and will terminate the program.
Note that for X Windows, pressing the middle mouse button when a
world map is up, in addition to displaying the longitude and latitude
of the point clicked on in the parent window, will also set the
current chart location to this point. This makes an easy interface
for doing chart relocation! Say you want to relocate your natal chart
to Tokyo, Japan. Just bring up your chart in graphics mode, press 'W'
to switch to the world map display, click middle button on Japan,
then return to the wheel chart and there your chart is, as if you had
been born at the same time but in Tokyo.
Control keys: Certain control keys can be pressed when a graphics
chart is up to set the color of the "pen" one can scribble on the
chart with using the left mouse button. (Who knows, maybe Astrolog
will contain a full featured drawing program someday. ;) Usually, the
scribbles are always in the gray highlight color. However, sixteen
control keys can be pressed to change the pen to sixteen different
colors, which are defined as follows: Ctrl-A is White, Ctrl-Z is
Black, Ctrl-R is Red, Ctrl-G is Green, Ctrl-B is blue, Ctrl-Y is
Yellow, Ctrl-O is Orange, Ctrl-L is Light gray, Ctrl-D is Dark gray,
Ctrl-V is Magenta (Valentine pink), Ctrl-U is Purple (pUrple), Ctrl-E
is Maroon (Dark red, next to 'R' on keyboard), Ctrl-F is Dark Green
(Forest green, next to 'G' on keyboard), Ctrl-N is Dark Blue (Navy
blue, next to 'B' on keyboard), Ctrl-J is Cyan, Ctrl-K is Dark Cyan
(Next to 'J' on keyboard).
*******************************
DATA ENTRY AND THE MAIN DISPLAY
*******************************
The main part of the program is executed simply by entering
"astrolog" (assuming that's the name of the executable), and the
program will ask you for all the birth info and will give the
planet/house positions. For example, for a chart in Seattle at the
Fall Equinox (for September 11th, 1994 AD at 11:19pm Pacific Daylight
Time, 7 hours before GMT) for the ten prompts one would enter: Sep,
22, 1994, 11:19pm, PT, Y, 122W20, 47N36, Fall Equinox, Seattle, WA.
The program then calculates and displays the positions of all
planets, Chiron, the four main asteroids, as well as items like North
Node of the Moon, Lilith or the South Node, the Part of Fortune, the
Vertex, and the East Point. (The Uranian bodies and fixed stars can
also be listed if one includes the appropriate command switches
described earlier.)
Two of the chart info fields interactively prompted for above
are general text fields for the person's name or chart title, and the
name of the city or location the chart is cast for. When set the
contents of these fields will be displayed in the various charts,
such as the -v listing, the -w text wheel, and in the graphic wheel
chart sidebars. (You can prevent these two fields from being prompted
for by setting the -Yo old style info switch described earlier.)
Another field explicitly prompted for is whether Daylight Saving
time was in effect for the chart or not. (Without this one would have
to subtract one hour from the time or time zone to indicate if
Daylight time was in effect, which of course was limited in that it's
not always clear whether a given chart was for say 11am Standard
time, or really for noon Daylight.) As with the name and city
strings, you will not be interactively prompted for the Daylight
setting when the -Yo flag is active. Enter "0" or "S" for Standard
time, and "1" or "D" for Daylight time (or War time). An indication
of Standard or Daylight time will be shown in the headers of the -v
listing and in the graphics charts.
--
The user interface where one manually inputs the chart
information is "smart" in various ways, as many of the chart info
fields may be entered in several formats and be parsed correctly:
Months may be entered as numbers from 1 to 12 or as their true
names. Case doesn't matter, and month names may be abbreviated to
their first three letters.
Year values may be entered with an optional "BC" or "AD" suffix.
(Periods may be interspersed, e.g. "b.c." is allowed.) Years BC may
also be entered as negative years, but if you do this note that you
have to add one to the negative number since there's no formal year 0
BC or 0 AD, e.g. since 1BC is followed by 1AD, specifying "5BC" would
be the number "-4".
Time values may be entered with a "pm" or "am" (or just "p" and
"a") suffix (periods may be interspersed), or in the standard 24 hour
clock. The separator between hours and minutes may be a colon or a
decimal point. For example, 6:30pm may be entered as "18:30",
"6:30pm", or even "6.3p". 12:30am may be entered as "12.30a.m.",
"0:30", and so on.
Time zones may be entered as abbreviation strings, or numbers in
hours before GMT (negative numbers for after GMT). For example,
"EST", "PST", and "GMT" are allowed. Note that this setting is still
separate from the Daylight Time setting. In other words, strings such
as "EDT" or "EWT" may be entered, but that will only subtract one
hour from the time zone number, and not turn on or off the Daylight
setting. Hence it may be preferred to enter strings that don't imply
such an assumption, i.e. Astrolog also accepts general abbreviations
such as "ET" or "PT". For that matter, some one letter time zone
abbreviations are accepted, e.g. "E" or "P" for Eastern and Pacific.
When specifying half hour time zones as a number instead of using an
abbreviation, the correct way is as "n:30" or "n.30", since the
parameter is processed as hours and minutes, and not something like
"n.50", which will be treated as a fifty minute after the hour zone.
(If one does interactively enter a "n.5" zone, the program will
display a warning indicating that the input is unusual and not a half
hour zone.) Below is a table of all zone abbreviations Astrolog
accepts. Listed for each zone is its official name, its standard
abbreviation, its hours before GMT, and its standard meridian. For
some zones the program accepts special two and one letter shortcuts:
Time Zone Name Abbrev. Hours Longit.
Hawaiian Standard Time HST HT H +10:30 157.5W
Central Alaska Time CAT +10 150 W
Alaska Hawaii Standard AHS +10 150 W
Hawaiian Daylight Time HDT + 9:30 157.5W
Alaska Hawaii Daylight AHD + 9 150 W
Yukon Standard Time YST YT Y + 9 135 W
Yukon Daylight Time YDT + 8 135 W
Pacific Standard Time PST PT P + 8 120 W
Pacific Daylight Time PDT + 7 120 W
Pacific War Time PWT + 7 120 W
Mountain Standard Time MST MT M + 7 105 W
Mountain Daylight Time MDT + 6 105 W
Mountain War Time MWT + 6 105 W
Central Standard Time CST CT C + 6 90 W
Central Daylight Time CDT + 5 90 W
Central War Time CWT + 5 90 W
Eastern Standard Time EST ET E + 5 75 W
Eastern Daylight Time EDT + 4 75 W
Eastern War Time EWT + 4 75 W
Atlantic Standard Time AST AT A + 4 60 W
Atlantic Daylight Time ADT + 3 60 W
Atlantic War Time AWT + 3 60 W
Brazil Standard Time BST BT B + 3 45 W
Brazil Daylight Time BDT + 2 45 W
West Africa Time WAT + 1 15 W
Greenwich Mean Time GMT GT G 0 0
Western European Time WET 0 0
Central European Time CET - 1 15 E
Eastern European Time EET - 2 30 E
Russia Zone 3 UZ3 - 4 60 E
Russia Zone 4 UZ4 - 5 75 E
Indian Standard Time IST IT I - 5:30 82.5E
Russia Zone 5 UZ5 - 6 90 E
North Sumatra Time NST - 6:30 97.5E
South Sumatra Time SST - 7 105 E
China Coast Time CCT - 8 120 E
Japan Standard Time JST JT J - 9 135 E
South Australian Time SAS - 9:30 142.5E
Guam Standard Time GST -10 150 E
Russia Zone 1 UZ1 -11 165 E
New Zealand Time NZT ZT Z -11:30 172.5E
International Date Line IDL -12 180 E
Local Mean Time LMT LT L Varies Varies
Note: The special time zone setting "LMT" allows one to do
charts for times given in Local Mean Time. When encountered, the
actual time zone setting will be set just so, doing the "subtract
four minutes for every degree west of the time zone's standard
meridian" arithmetic, to make it work.
Longitude and latitude locations may be entered in the standard
<degree><direction><minute> notation, e.g. "122W20" or "33S52". The
direction specifier may also be put at the end of the string, with a
period or colon separator between degrees and minutes, e.g.
"122:20W" or "33.52S". The direction character may also be left off
altogether in which case positive values indicate western and
northern locations and negative eastern and southern, e.g. "122.20"
or "-33:52".
Note: One may enter seconds for times (and locations) as
fractional minutes by including more than two digits for the minute
after the decimal or colon separator. For example, "122:205" will be
treated as 122 degrees and 20.5 minutes west. To specify the time of
4:05am and 45 seconds, enter the time as "4:0575am".
Astrolog deals with the switchover from the Julian to the
present Gregorian calendar system when accepting input and printing
output. The calendar system changed (at least in Europe) from the
Julian to the Gregorian calendar in 1582 when October 4th was
followed the next day by October 15th. Throughout the program
Astrolog uses the Julian Calendar for date and leap year
specification for dates before 10/4/1582 and the Gregorian after. It
will properly handle the change even in the middle of months in
charts, e.g. in -K calendar charts, -E ephemeris charts, -dm aspect
search charts, and graphics animations, ten days will be skipped in
October 1582.
--
When the standard list of planetary positions is displayed, some
additional pieces of information are shown along with the planetary
locations: Whether or not each planet is in its ruling sign, or fall,
as well as the same information for houses, is shown. Planets in
their exalted and debilitated signs and houses are noted too. In
addition to the (R) indicating a planet in its ruling sign, and an
(F) for a planet in its fall, we have (e) if a planet is in its
exalting sign, and a (d) for a planet in its debilitating sign (which
is always opposite the exaltation, as how the fall is opposite the
ruler). An element table indicating the sum of the signs in each
element and mode and their totals is displayed in a grid form too.
Also in this main display, the total number of planets in each
of the hemispheres of the wheel, as well the number of objects in
yang/positive/masculine and yin/negative/feminine quality signs, are
counted. To the right of the element table, we have a column of
seven numbers labeled as follows: "+" is the number of "yang" objects
(i.e. in Fire or Air signs); "-" is the number of "yin" objects (i.e.
in Water or Earth signs); "M" is the number of objects above the
horizon (i.e. in the "Southern" hemisphere of the Midheaven); "N" is
the number of objects below the horizon (in the "Northern" hemisphere
of the Nadir); "A" is the number of objects in the Eastern half of
the sky (in the hemisphere of the Ascendant); and "D" is the number
of objects in the Western half of the sky (in the hemisphere of the
Descendant). Note that cusp objects are left out of hemisphere
counts (but still included in the other object summaries) as they
would skew things since they are always in a particular hemisphere.
Finally we have a field indicating the division of objects into the
first six and second six signs of the zodiac. The number of objects
in the first six signs of the zodiac will be printed, labeled by the
character "<". (The number in the second half isn't printed; just
subtract from the total if you want to know.) According to a book on
the Kaballah, the emphasis of the first six signs on the zodiac is on
"what's to learn", and the emphasis on the second six signs is on
"what's to share". Use or interpret this as you wish.
I have taken the liberty to define ruling and exalting signs for
the asteroids (and the rest of the first twenty objects that don't
already have them.) This won't affect much other than whether a 'R',
'F', 'e', or 'd' is displayed in the -v charts, but it will slightly
affect the powers given to these objects in the -j influence chart
since they can be in their ruling sign, etc. The -HO object list will
display the list of ruling and exalting signs (and the fall and
debilitating signs which are just opposite the above) for all these
objects in addition to the planets; however, I have listed them below:
Chiron, the compassionate, experienced healer, is most similar
in function to Pisces, hence Chiron rules here. Chiron expresses well
in caring, feeling, Cancer, hence Chiron exalts here. Ceres, goddess
of agriculture and representing the mothering, reproductive instinct,
is similar in function to Taurus, hence Ceres rules here. Ceres
expresses well in the nurturing, caring, sign of Cancer, hence Ceres
exalts here. Pallas Athena, mentally acute and unemotional, is most
similar in function to Virgo, hence Pallas rules here. Pallas
expresses well in practical, disciplined, introverted Capricorn,
hence Pallas exalts here. Juno, ability to sacrifice self-interests
to maintain a relationship, is most similar in function to
relationship oriented Libra, hence Juno rules here. Juno expresses
well in sociable, crowd pleasing Leo, hence Juno exalts here. Vesta,
with its orientation to directing hidden creative or sexual energy
without fear, is most similar in function to Scorpio, hence Vesta
rules here. Vesta expresses well in individualistic, quirky Aquarius,
hence Vesta exalts here.
The North Node, with its emphasis on being able to break from
the past routine and pursue the unfamiliar and personal growth, is
most similar in function to society questioning independent Aquarius,
hence it rules here. The Node expresses well in growth and sacrifice
oriented Virgo, hence the Node exalts here. The South Node's ruling
and exalting signs are set to be respectively Leo and Pisces, i.e.
the opposite of the North Node's. The Part of Fortune is calculated
based on the positions of the Sun, Moon, and Ascendant; if these
three objects are in their ruling signs, then the Fortune will fall
in Pisces, hence the Fortune should rule here. Similarly, if the Sun,
Moon, and Ascendant are all in their exalting signs, then the Fortune
will fall in Aquarius, hence the Fortune should exalt here. The
Vertex, being always near the Descendant, corresponds to Libra, and
hence has the same rulership and exaltation as Venus: Libra and
Pisces. The East Point, being always near the Ascendant, corresponds
to Mars, and hence has the same rulership and exaltation as Mars:
Aries and Capricorn. Lilith has the rulership of Scorpio and
exaltation in Pisces. House cusps and angles rule the sign
corresponding to them, e.g. Aries for the Ascendant, Taurus for the
2nd Cusp, and so on. House cusp objects exalt in the next sign of the
same element beyond the one they rule, e.g. Aries exalts in Leo.
Each uranian also has been assigned its own ruling and exalting
sign, meaning uranians in their rulership, etc, will be flagged as
such and have more or less influence and so on. I also came up with
these myself and used the interpretation strings to decide what the
most appropriate signs are. If you disagree, feel free to change them
in the code, or I'll be willing to describe in more detail why I
chose what I did for them. Specifically, Cupido rules Libra and
exalts in Gemini, Hades rules Scorpio and exalts in Virgo, Zeus rules
Leo and exalts in Aries, Kronos rules Capricorn and exalts in
Sagittarius, Apollon rules Sagittarius and exalts in Aquarius,
Admetos rules Virgo and exalts in Scorpio, Vulkanus rules Aries and
exalts in Leo, and finally Poseidon rules Sagittarius and exalts in
Pisces.
The standard chart listing of the planetary positions will also
include an additional field for the "velocity" of each planet. This
velocity value approximates how fast the planet is moving through the
zodiac with respect to the Earth (or whatever the central body is set
to) in degrees per day. This value of course, goes negative when a
planet goes retrograde. This is useful not only to get a feel for how
fast each planet moves through the zodiac, but to determine when a
planet is about to go retrograde or direct - the value approaches
zero when the planet changes direction.
**********************************************
FILES, DATA DEFAULTS, AND COMPILE TIME OPTIONS
**********************************************
Astrolog includes the ability to search an input file for
various default settings to use in the program. This allows one to
easily change major defaults without having to recompile the program,
which is useful if, say, one receives a compiled executable from a
friend who has a different configuration. The program looks for the
file "astrolog.dat" in the current directory, and if not there, looks
for it in the default directory (and in directories indicated by
environment variables if set). Parameters in this file will override
any defaults compiled into the program, although the highest priority
is still given to the command line options. Note one doesn't *have*
to have this file in order to run the program - if not found Astrolog
will still run as before using compile time defaults.
Astrolog.dat config files from versions 4.10 and before won't
work with version 4.40, because like the chart info files, the
astrolog.dat file is also a series of command switches (see below).
All the fixed astrolog.dat fields used in version 4.10 and before no
longer exist, since there are command switches to do the same things
as everything the old files could set and a whole lot more.
Attempting to use any old astrolog.dat file will cause the program to
complain that it's not in any valid format. If you have an old file,
delete it and modify the one included with this release to correspond
to your desired settings. Version 4.20 and 4.30 config files are
however fully compatible with 4.40 and don't need to be changed.
--
As of Astrolog version 4.20, all files are a series of command
switches that indicate the contents of the file and set the
appropriate things when executed. This is very powerful, extendable,
and general. Astrolog still has the ability to read and write the old
chart formats. This affects -o chart info files, -o0 chart position
files, and the astrolog.dat config file. In a sense there is no
difference between the three formats, just they are generated or read
in for different situations. Whenever any chart is read in, Astrolog
simply reads in the file a line at a time and processes the switches
as if they were on the command line or entered in a -Q loop.
The astrolog.dat config file is one of the files that is a
series of command lines. This change makes the astrolog.dat file much
more powerful and versatile than it would be otherwise. The file is
not in a fixed format with fields that have to be in a certain order.
You can move lines around, add as many lines as you want, or take
lines out without problem. These config files shouldn't become out of
date in future versions of the program either. Incompatibilities will
only arise if the syntax of a switch changes, and even then it's
obvious as to the small correction that needs to be made. It's
important to remember that any switch can be put in the astrolog.dat
file. For example, you can change the default behavior of the program
when invoked without any switches, by say putting "-n" in it, to make
the program always display the chart for now unless you specify
otherwise. You may want to put "-C" in it if you want the house cusps
to always be included in transit and other charts. If you are always
doing graphics charts, you can put "-X" in there somewhere so you
don't have to put it on the command line. Long or complicated
switches like new planet definitions, and color or interpretation
customizations, are good candidates to put in astrolog.dat so they
don't have to be retyped all the time.
The file as generated with the -o switch is also just a couple
of command lines to set the chart information appropriately. (Before
version 4.20, the older file format hadn't changed a bit since files
where first introduced in version 1.20!) Note that you can manually
add additional switches to any chart info file, to have per chart
settings. For example, if you are always displaying a particular
natal chart's aspect grid, you can put a "-g" in that particular file
so you don't have to include -g on the actual command line with the
"-i file". (Or you can put the "-g" in the astrolog.dat file and have
all charts come up by default in the aspect grid instead of the -v
listing.) Note also that the -i switch is technically a generic
command file reader. You can read any switch file with -i, and even
reload the astrolog.dat defaults with a line such as "-i astrolog.dat".
Since -i will read in and process any command file, you can make
your own arbitrary command files and read them in whenever you want.
You aren't limited to modifying just chart info files and
astrolog.dat. Say you like to use a narrower set of orbs for
transits. You can make a special file that just sets a bunch of orbs
using the -A switches, and then read it in via "-i narroworbfile" and
combine it with -t or whatever. Note that command files can even
process other command files inside of them. Remember that
astrolog.dat is just a special command file; the program basically
just does a "-i astrolog.dat" internally on startup.
-@ switch: All Astrolog switch files have to begin with the '@'
character, which identifies them as such. The switch files as
generated with -o and -o0, and the default astrolog.dat file, have a
couple numbers immediately following their '@' which indicate the
file type and version, included for potential backward compatibility
issues in the future. (For those interested, the first two digits
indicate file type, where "01" is a -o chart info file, "02" is a -o0
chart position file, and "03" is a configuration file like
astrolog.dat. The second two digits indicate file version: Chart info
files are "0102", because version 1 of a chart info file was the
pre-version 4.20 form. Chart position files are "0203" because
version 2 was the pre-version 4.20 form, and version 1 was the
pre-version 3.10 form of the old format. The astrolog.dat file is
"0308" because versions 1..7 were all the different old fixed field
versions of this dating back to when the config file was first
introduced.) Note that the '@' happens to technically be a switch
too, but is only dealt with internally by the program. If you make
any of your own command files to read in with -i, just be sure there
is a '@' character (better yet the sequence of characters "@0308" to
be like the default astrolog.dat) at its very beginning and
everything will work.
Chart position files as generated with the -o0 switch are much
improved over the format used in version 4.10 and before. The zodiac
positions have an extra two digits of precision and the declinations
have an extra one digit. The newer files include the velocity of the
planet and its distance from the sun, so applying vs. separating
aspects and -S orbit charts work perfectly. (Before the data would
be lost.) These files may also include star positions unlike before,
and are more complete with respect to house cusps. The actual house
array is kept separate from the cusp object indexes, meaning that one
for example can reload charts in the Equal house system that
disassociate the Midheaven from the 10th cusp and remember both
positions, and even save a -r synastry chart with -o0 and remember
both sets of house cusps on reload.
-YF switch: As -o0 position files are a series of command lines,
there is a switch to set the actual positions of a planet. This is
the -YF switch which takes eight parameters, which are: the index of
the object to set the positions of, the degree within the sign of its
position, the zodiac sign of its position, the minute within the
degree of its position, the degree of its ecliptic declination, the
minute within the degree of the declination (which should always be
positive, e.g. for a declination of -10.5 degrees, the parameters
would be -10 and 30), the velocity in degrees per day (positive is
direct motion, negative retrograde), and finally the distance from
the Sun or central body in AU. This switch shouldn't really be used
outside of -o0 files as it causes the chart to be assumed to have no
time or space, but is described here for completeness. Note that
another advantage to the newer -o0 files is that you can again add
other switches to them (e.g. "-s" to indicate if it's a position file
for a tropical or sidereal zodiac chart), and rearrange or delete
lines without problem, unlike the older -o0 files which required all
the planets and in a fixed order.
Here's an example of one of the switch based command files,
specifically a chart info file with the newer name, city, and
Daylight fields in it. This is much easier to understand and modify
than older files, and is the info for my own natal chart consisting
of the three lines below:
@0102 ; Astrolog chart info.
/qb Nov 19 1971 11:01am ST +8:00 122:20W 47:36N
/zi "Walter D. Pullen" "Seattle, WA"
--
Astrolog 4.40 has several environment variables which may be set
to indicate directories where to find the various files it may look
for. Without them, the only place the program will look for chart
files, the astrolog.dat initialization file, and ephemeris files is
in the current directory and default directories set at compile time.
The program will look where all of these environment variables point,
if they are defined. The three environment variables are named
"ASTROLOG", "ASTR4.40", and "ASTR". On a PC you can set an
environment variable from the DOS prompt with a command such as "set
ASTROLOG=C:\PROGRAMS\ASTRO430\CHARTS". This command can be put in
your AUTOEXEC.BAT file to remain persistent. On a Unix system you can
set an environment variable from the shell with a command such as
"setenv ASTROLOG ~username/programs/astro430/charts". This line can
be put in your .cshrc file to remain persistent. Note that the
ASTR4.40 environment variable is version specific, i.e. the previous
version looked in one called ASTR4.20 instead. This allows one to
have a directory for version specific files such as the astrolog.dat
file, and have multiple versions of Astrolog on the system at once
without them conflicting with each other. (Note that Unix systems
running the ksh shell apparently don't acccept variables like
ASTR4.40 with periods in them, but they will accept the other two.)
I personally point ASTROLOG to my chart files directory, ASTR4.40 to
my astrolog.dat directory, and ASTR to my ephemeris directory,
although any file may be found with any of the variables.
Specifically, when Astrolog searches for a file, it will look in the
following directories, in order: The current directory, the ASTR4.40
environment variable directory, the ASTROLOG environment directory,
the ASTR dir, and finally the compile time default directory.
--
Some systems (for example, Mac's) don't directly accept
parameter switches on the command line (such as Astrolog is being
booted from a menu.) Therefore, such a limitation makes one unable to
access many program features in the normal way. If this is the case
with your system (or if you just don't like command line options),
then comment out the '#define SWITCHES' line at the beginning of the
astrolog.h file. If you do this, then the program will ignore any
switches and prompt you to enter them manually at the very beginning
of program execution. You just enter one line containing all the
parameters together, separated by one or more spaces, just like is
done when typing in the command line, or when in the -Q loop mode.
Astrolog will automatically parse the string and extract the
parameters, just like the operating system shell does.
Related to this, the "-." switch, when encountered on a command
line, will immediately terminate the program, ignoring any modes or
other command switches. This is the formal way how to really exit the
program when in the -Q loop (and really only useful in this case).
Remember, earlier it was said to enter "." for the command line to
exit the -Q mode. Astrolog internally interprets the "." as a switch
without a leading dash, i.e. "-.", which is a switch that will force
program termination.
--
I often use Astrolog to look at and compare files containing
charts of various people. I have many chart files, so I keep them in
a separate directory. Since it is always a pain to have to cd into
this special directory all the time, there is a DEFAULT_DIR string to
be set at compile time. Whenever the program reads in a chart file
with the -i option, it will first look in the current directory for
it. If it's not found there, Astrolog will then look for a file of
the same name in this special default directory (and in directories
indicated by environment variables if set).
A couple of other compile time option variables are in the
include file astrolog.h: For those people who don't like Placidus, a
default house system can be set by changing the value of
DEFAULT_SYSTEM to the value from 0 to 11 indicating what system to
use if the user doesn't explicitly specify one with -c or in
astrolog.dat. A few other compile time options are in astrolog.h
which can be used to leave out certain parts of the program which you
don't desire to have or just take up memory and make the executable
larger. The #define INTERPRET can be commented out to remove all the
-I interpretation routines and tables. The #define BIORHYTHM can be
commented out to remove the non-astrological -rb biorhythm text and
graphical charts. And the #define CONSTEL can be commented out to
remove the -XF constellation graphics and -HF text constellation
list. Finally, concerning the source code itself, all of Astrolog's
functions have full Ansi prototypes, which can be turned off for
older compilers by commenting out the PROTO #ifdef.
There is a special compile time variable dealing with graphics
(in addition to the "X11" and "MSG" / "BGI" ones) called "GRAPH". One
comments out the #define GRAPH line if they don't want any graphics
at all, and not just if they don't have X windows or PC screen
graphics. In other words, one can generate most of Astrolog's
graphics charts even if they don't have X windows or a PC with
graphics abilities. When GRAPH is defined, but X11 or MSG and BGI
aren't, the program will generate the charts, but just never try to
bring up a window; it will simply always assume that you are writing
a bitmap file. The bitmap file will contain a (unfortunately always
black and white for the X bitmap format) image of what would normally
be in the window, just as the -Xb switch does. One can then use
various graphics utilities to convert the image into something they
can display on their system if they can't do so using any of the
available bitmap modes. (Any system that can compile Astrolog should
be able to compile in all the non-screen graphics features as well.)
A bitmap output mode other than the Windows .bmp bitmaps and
standard ones that can be read with the Unix X11 xsetroot command is
allowed in the graphics routines. If one changes the BITMAPMODE
compile time option in astrolog.h to the character 'A' when
compiling, or invokes the -Xb switch as -Xba, then all bitmaps output
will be in a straight Ascii form, with one character corresponding to
each pixel. This format is identical to the result produced by the
Unix command bmtoa (when the chart is monochrome), and it can be
converted back into a bitmap with the Unix command atobm. Although
not as efficient spacewise, this is a simpler format, and is
recommended for those without screen capabilities who still want to
use Astrolog's graphics, if they want to write their own conversion
program.
*****************************************
DESCRIPTION OF X WINDOW GRAPHICS FEATURES
*****************************************
One of the most impressive features of Astrolog are its graphics
features available for X windows, which are generally accessed in the
program via the -X switch and derivatives of it on the command line.
There are seven different types of chart displays: A standard graphic
display of a wheel chart in a window (with glyphs, aspects in the
center, etc), graphic displays of the Astro-graph charts (which look
almost identical to the Astro*Carto*Graphy maps from Jim Lewis)
complete with all the labeled lines drawn on a map of the world (like
the -L option), aspect/midpoint grids showing the aspects and orbs in
effect between every body in a chart (like -g option), a local sky
chart showing where each planet is located on a map of the local
horizon area (as in -Z), a space chart showing an aerial view of the
solar system (as in -S), a dispositor graph chart showing planetary
rulership chains (accessed with -j), and a graphic ephemeris plotting
position vs. time (as in -E), in addition to a couple of
non-astrological charts such as calendar (-K) and biorhythm (-rb)
graphics. The X wheel and aspect grid charts can also displayed in a
different manner to accommodate relationship comparison charts
showing two sets of planets at once. There are also other commands
that can be given to the window once it is up and running, which can
do other things, such as continually update the window every few
seconds to the current status (i.e. an extended version of the -n
option) as well as other forms of animation. Note that the program is
still text based, and one can turn off all the X features by
commenting out the #define X11 in astrolog.h if they don't have X
windows.
Probably the only thing more impressive than the graphics
features are the graphics features displayed on color monitors.
(Charts displayed in color are *much* more eye catching than the
monochrome ones, in my opinion.) Here is how the colors have been
assigned for the various charts: Four colors have been allocated for
the four elements - Fire = Red, Earth = Brown, Air = Green, Water =
Blue. The various sign glyphs (and the corresponding house labels)
are in the color of their element. Planets are in the color of the
sign of their main ruler. Chiron and the four asteroids are Pink,
while the north node, and other non-physical objects like the fortune
and vertex are Blue Grey. Representations of the Ascendant/
Descendant/ Midheaven/ Nadir (in the astro-graph map lines and
elsewhere) are in the element color of the corresponding sign/house
that the angular lines refer to, i.e. Ascendant = Red, Midheaven =
Brown, Descendant = Green, Nadir = Blue. A few extra things have been
added for color wheel charts only: dark gray lines marking off each
house (in addition to the main lines on the horizon and meridian),
and each degree instead of every 5th degree being marked in dark gray
on the outer circle (every 5th degree being white). Aspects lines are
colored too, as follows: Conjunctions = Yellow, Sextiles = Light
Blue, Squares = Red, Trines = Green, Oppositions = Dark Blue. For the
minor aspects we have: Inconjuncts/Semisextiles = Pink, Semisquares/
Sesquiquadratures = Orange, (Bi/Semi)Quintiles = Blue Grey,
(Bi/Tri)Septiles = Maroon, (Bi/Quatro)Noviles = Violet.
For color X terminals, the -XG globe display and -XW world map
display are done with the continents in different colors, also making
them look much better than monochrome maps. Each of the seven
continents is in a different color of the rainbow, and the colors are
chosen to correspond to the appropriate chakra (etheric energy vortex
along the human spine) that goes with each land mass. They are:
Africa - red - Root chakra, Australia - orange - Navel chakra, South
America - yellow - Solar plexus chakra, North America - green - Heart
chakra, Europe - blue - Throat chakra, Asia - indigo - Third Eye
chakra, Antarctica - violet - Crown chakra. Major lakes are colored
navy blue, of course.
--
-v -X: The X wheel charts have their graphic information organized as
follows: There's an outer circle showing the signs and sign glyphs,
inside of which is a smaller circle divided up into 5 degree
increments to make determining exact degrees easier. Inside of this
is a circle divided up into the 12 houses labeled with numbers. The
entire chart is divided by two dashed lines through the Ascendant/
Descendant (which is always horizontal of course) and the
Midheaven/Nadir. Inside the house circle are the planet glyphs in
their appropriate positions. Small pointer lines run from each glyph
to just before single dots. These dots indicate the precise locations
in the zodiac of each object. The pointer lines (which are dashed if
the object is retrograde and solid otherwise) are necessary so as not
to have to draw planet glyphs on top of one another when planets are
conjunct. Inside the ring of the single dots, are the aspect lines
connecting these positions. Since the default number of aspects to
use is just the 5 majors, one can determine which aspect is in place
just by looking at the aspect line. The accuracy of the aspect is
determined by the dashedness of the line: A solid line means the orb
is < 2 degrees; a dashed line means the orb is 2 to 4 degrees; a
really dashed line mean the orb is 4 to 6 degrees, and so on.
-v0 -X: Astrolog's wheel charts will be labeled more extensively than
just having the chart header information displayed at the bottom of
the graphic like in other chart modes. The wheels will include full
information on time, place, the chart's name and city fields if
defined, house system, zodiac, central planet, element table info
(including the count of objects in angular, succeedent, and cadent
houses, and the count of objects in the first six "learning" signs
and the last six "sharing" signs), as well as the actual positions of
house cusps and planets as displayed in the wheel. All this
information is in a "sidebar" to the right of the wheel which
includes a listing not unlike the -v text chart. (Note that the size
of this sidebar is such that for the default 480x480 pixel chart
size, including the sidebar will make it 640x480, which perfectly
fills a VGA PC screen.) If you want a simpler style wheel with just
the chart information at the bottom of the graphic, set the -v0 flag,
as in "-v0 -X" instead of "-v -X" or just "-X".
-w -X: A different way of formatting the graphical wheel charts
described above is available by combining the -w switch with -X.
Normally all of Astrolog's wheel charts are such that each zodiac
sign is the same size. Due to different house sizes in most systems
however, this makes the houses appear different sizes on the wheel,
so that the Midheaven won't be the exact top of the chart for
instance. Some users may instead prefer "house oriented" as opposed
to sign oriented wheel charts. Astrolog, with the -w -X combination,
will make each house be the same size on the screen, and will
compress or expand the signs instead (of course this means that such
things as exact squares may not be between objects exactly 90 degrees
apart on the circle any more). When graphics are displayed on the
screen, the '0' key will toggle between the two forms of wheel chart.
-L -X: The graphical astro-graph charts are organized as follows: A
map of the world is shown. The edges of the map are labeled with
ruler lines that are 5 degrees apart (with longer ruler lines for
more important longitudes and latitudes, like those that are
multiples of 10, 30, etc.) The equator is labeled with a dashed line.
The polar regions of the world aren't shown; the map shown ranges
from 60 degrees S latitude to 75 degrees N latitude. Note that each
pixel on the screen represents exactly one half a degree on the
world. (For -Xs 100 the ratio is one pixel to one degree, and for -Xs
400 the ratio is one pixel to 1/4 degree.) On this map are drawn the
lines indicating where on the world the various planets are angular
at the time in question. (Note: you might want to -R restrict some
objects because otherwise the map tends to get pretty cluttered with
lines.) As expected, Midheaven and Nadir lines are vertical, and the
Ascendant and Descendant lines are curved. Little square boxes on the
Midheaven lines indicate the exact zenith latitude location. Each
line is labeled at the top or the bottom of the screen, showing what
planet is in question and (sometimes) what angle is in question. All
Ascendant and Midheaven lines are labeled at the bottom of the
screen, and all Descendant and Nadir lines are labeled at the top.
Each line goes a bit beyond to the top or bottom of the world map,
and then another pointer segment (which is again dashed of the object
in question is retrograde) goes and points to the planet glyph. The
glyph for the Ascendant or Midheaven is under each of the glyphs at
the bottom of the screen, explicitly indicating whether the line is
an Ascendant or Midheaven line. At the top of the screen, however,
there are only the glyphs, but one can still determine whether these
lines are Descendant or Nadir lines based on whether they are curved
or not. Note that not all the Descendant lines are labeled; this is
because some of the Ascendant/Descendant lines actually connect near
the top of the screen and don't actually cross it. This graphic
astro-graph chart will display a small purple dot at the precise
point on the world map for which the chart in question is being
generated. This is useful to help see how close the various planetary
lines are to you, if you live in the middle of the continent or
someplace not easily determinable on the compact map of the world.
-L0 -X: Graphic astro-graph charts will be done slightly differently
if done by combining -L0 with -X. A thin horizontal line will be
drawn all across the map of the world at the latitude of the chart in
question. Normally, there's only a small dot at the precise location.
In astro-graph charts, intersections between lines anywhere at the
same latitude of a natal chart, even if any number of degrees away
longitudinally, will affect the person, in the same way but not as
stong as if they are directly under the instersection itself. This
small chart modification can make finding such intersections easier
in the graphics chart, just as -L0 for text charts actually lists the
latitudes of all crossings.
-g -X: Aspect grid graphics with the appropriate aspect glyphs can be
displayed by combining the -g option with the -X option (astrolog -g
-X). Both the split aspect/midpoint grids labeled down the diagonal,
as well as the relationship aspect grids between two charts (astrolog
-r <file1> <file2> -g -X) are supported. The aspects glyphs, objects,
and the signs in the grids are in their colors as defined earlier.
Like the astro-graph windows, these charts can't be resized in the
normal way unless one uses the '>' and '<' keys. For anything less
than the larger scale sizes (achieved with the switch -Xs 300, or by
pressing '>' within a window) all that will be displayed in each
aspect grid cell is the glyphs of the aspect in effect, the planet
being aspected, or the sign of the midpoint. However, once the
largest scale size is reached, there is room in each cell to display
the aspect orb to the nearest minute off of exact (with a plus or
minus sign indicating whether the actual angle is slightly greater
than or less than exact, or an 'a' or 's' if applying vs. separating
orbs are to be shown instead); the degree and minute in addition to
the sign for midpoints; and the degree and sign location for each
planet that's in the grid, as with the -g text charts.
-m -X: Combining the -m switch with -X will have the same result as
-g with -X, since the aspect grid shows both aspects and midpoints
separated by the grid diagonal. However, doing a relationship
midpoint chart (-r0 -m -X) will result in the relationship aspect
grid coming up but showing the midpoints instead of aspects, as
desired. The -r0 -m -X switch combination implicitly does the results
of the -g0 switch, which for relationship charts puts midpoints
instead of aspects in the grid.
-Z -X: The -Z local horizon feature can be displayed in an X window
as well (e.g. astrolog -Z -X), in which all the planets will be
displayed in a window depicting the sky. The small dot above or below
each glyph indicates exactly where each planet is. (Some of the
glyphs may be overlapping, although the program tries to cut down on
this.) There is a horizontal line dividing the window representing
the local horizon; planets above this line are visible, while planets
below it are set. There are three vertical lines dividing the window
as well: The middle line represents the due south direction, the one
to the left is due east, the one to the right is due west, and the
edges of the window are due north. (These directions are labeled in
the borders of the chart.) Like the standard chart display, this
window or graphic may be resized to any proportion. At any time one
can press the 'Z' key when a graphic is up to enter this display type
in that window.
-Z0 -X: An additional graphics chart is available through the -Z0
switch: local horizon charts suitable for stargazing. As we know, the
normal -Z switch generates a listing of the planets with respect to
the local horizon, and the -Z combined with the -X switch generates a
graphic image of the planets and stars on the local horizon. This
chart assumes one is facing due south, and is divided left to right
by the horizon line, with straight up being toward the top of the
screen and straight down toward the bottom. This is a good chart,
especially for noticing the rising and setting of planets and other
objects, but the fact that the meridian is split up causes distortion
when trying to view objects high up in the sky. Therefore, if one
combines this -Z0 switch with the -X switch, a differently oriented
local horizon chart will be displayed. Here, the zenith point
straight up is in the center of the screen, and the horizon line is a
surrounding circle. Due north is along the line from the center to
the top of the screen, due south is on the line from the center to
the bottom, east is to the left, and west is to the right. In other
words, this is just like what one would see if they were lying on
their back looking straight up with their feet to the south, so this
should be better for stargazing. Outside the circle marks what's
below the horizon, and the extreme corners of the screen mark the
nadir - what's straight down. As with the normal -Z graphic chart,
this one has the various axes marked at five degree increments.
-S -X: The -S switch can be combined with -X to give a graphics chart
of the solar system. This will be displayed as an aerial view of the
entire solar system, with 0 degrees Aries to the left of the screen,
0 degrees Cancer to the bottom, etc. Note that this chart includes
all possible planets, including the Earth (whose glyph is a cross
inside a circle). Whatever object is chosen to be the central body is
at the center of the screen, with all the others around it. This is a
fun chart to animate - watch the planets go around the Sun, and *see*
how they turn retrograde with respect to the Earth. In addition to
the bodies themselves, twelve spokes are drawn from the center body
to the edge of the screen, which delineate the zodiac with respect to
it. Note that the scale of the solar system is large; attempting to
fit all the planets out to Pluto on the screen at once will cause all
the inner planets to be crammed together near the middle of the
screen. To deal with this, the scale size as indicated with the -Xs
switch and the '<' and '>' keys will affect how much of the solar
system is viewed at once (in addition to the glyph sizes). For a
scale size of 400, the viewing region will have a radius of 1 AU
(just enough to cover out to the Earth's orbit). For a scale size of
300, the viewport will have a radius of 6 AU (about out to the orbit
of Jupiter; useful for viewing the inner planets). For a scale size
of 200 (default), it will have a radius of 30 AU (enough to include
Neptune, and Pluto most of the time). Finally, a scale size of 100
will result in a radius of 90 AU, enough to easily include the entire
solar system, as well as the orbits of the hypothetical Uranian
bodies beyond Pluto. Note that this chart (and its text version as
well) will usually leave the Earth's Moon out. The -b extended
Placalc formulas are required to be in effect (as well as either the
Sun or Earth being the central body) in order for the Moon to be able
to appear. At a 400% scale zoom with the Moon included as well, one
can actually get a feel for the relative distance of the Sun from the
Earth and the Moon from the Earth, although the chart will have to be
over 1000 pixels wide for the Moon to even appear one pixel away from
the Earth at all!
-j -X: Graphic dispositor charts are available by combining the -j
influence switch with -X. This is a another graphics chart format
that can also be switched to whenever screen graphics are up by
pressing the 'J' key. The dispositor of a planet is the planet that
rules the sign it's located in. For example, if you have Venus in
Aries, the dispositor for your Venus is Mars. A graph can be made
showing an arrow from each planet to its dispositor. A final
dispositor is a planet who is its own dispositor, i.e. in its ruling
sign with no arrows pointing away from it. There can also be two
planets in what's called mutual reception (or a reception loop of
more than two) if they are each other's dispositor, e.g. Venus in
Aries and Mars in Libra. Astrolog's dispositor chart will show four
subgraphs, one in each quadrant. Both a sign dispositor graph, as
described above, and a house dispositor graph, where each planet is
linked to the planet ruling the house it's in, are shown. In
addition, both types have the same information displayed in two
different useful formats: a wheel with the planets around the
perimeter, and in a hierarchy with final dispositors at the top and
the other planets stacked based on how many levels they are from
final ones. Final dispositors are circled in white, while those in
reception loops are circled in gray, and dispositor arrows within the
top level (i.e. in reception loops) are in white too instead of the
color of the planet for easy identification. For a demo of the
dispositors in your own chart, do "astrolog -i yourchartfile -j -X".
-K -X: Graphic calendar charts are available by combining the -K
calendar chart with -X. This is another graphics format that can be
switched to whenever screen graphics are up by pressing the 'K' key.
This shows a calendar for the month of the current chart, like the
corresponding text chart but in graphic format with boxes for each
day like a real calendar. The current day within the month will be
highlighted in green (if the -Xl label inhibitor flag isn't on). The
-Xi alternate display mode will put the date numbers in the middle of
their box instead of in the upper left corner. Finally the -Xt chart
info display flag for this particular chart will control how the date
numbers are justified in their box.
-E -X: A graphical planetary tracking chart is available by combining
the -E switch with -X. This "graphical ephemeris" will display the
sign degrees of the zodiac along the horizontal axis, and the days in
the given month along the vertical. The positions of the planets at
each day are then graphed. The result is a bunch of wavy lines that
make it easy to see all the planetary movements during the month.
Wherever lines cross there's a conjunction on the day indicated on
the axis at the same level as the crossing. Although this only looks
at the month in the given chart information, the actual day will be
highlighted on the vertical axis. Combining the -Ey yearly ephemeris
instead with -X will generate a graphical ephemeris showing the
movements for the entire year, with the months labeled along the
vertical axis.
-r0 -X: True relationship wheel charts can be displayed in a window,
i.e. where the planets of both charts are displayed in separate rings
of the same wheel. Use the -r0 option to display this comparison
type. For example, for the command "astrolog -r0 person1 person2 -X",
the following is displayed: The signs and houses as in person1's
chart are drawn in the outermost part of the wheel. Inside this is a
ring of person2's planets as displayed in person1's houses, and
inside of this are person1's own planets. Finally at the very middle
is an aspect grid, which shows those aspects that are occurring
between the objects in the two charts. Basically this is just the
standard wheel chart for person1, except that person2's planets are
in an outer ring of objects and the aspect grid shows the aspects of
the relationship. Putting such a chart in animation mode only affects
person2's planets, so this is a great way to analyze transits: Doing
"astrolog -t yourchartfile -X" will show all your current transits,
and allow you to easily animate the transiting planets through your
natal signs and houses.
-rb -X: Graphical biorhythm charts are available by combining the -rb
(or -yb) switch with -X. This will make a graph of one's biorhythm
for the two weeks before and after the specified time, with days on
the horizontal axis and the Physical, Emotional, and Intellectual
percentages on the vertical. When any graphics chart is up, one may
press the 'Y' key to revert to a biorhythm chart. (Note that as this
is a relationship comparison chart, if you go to it from a graphics
mode only showing one chart, it will show the biorhythm for them at
their birth, and you will want to then animate or adjust it to get a
useful display.)
--
A couple of conveniences for the graphics features exist. Note
that the -Xo <graphicsfilename> option is only used in conjunction
with the -Xb write output to bitmap switch (or the -Xp or -XM
PostScript and metafile chart formats). Therefore, -Xo automatically
assumes -Xb is set. (Invoking -Xb itself without -Xo will have the
program prompt the user for the bitmap filename.) In other words,
astrolog -Xb -Xo 'file' is the same as just astrolog -Xo 'file'.
Astrolog includes its own appropriate X bitmap (a rainbow over an
opened Third Eye) if one iconifies its X window.
For X windows, one can animate a graphics chart on the root
background by combining -XB with the -Xn switch. This will be just
like the animations done in windows except the root is being used
instead. Astrolog can be run in the background this way to
continually update your root to the current chart representing the
present moment. Limitations with this are that since there's no
window, no keypresses can be processed so the program must be
manually terminated, and that the continual updates will be as CPU
intensive as the window animations are.
Hack: A fun thing to do is that a graphic wheel chart with -I
interpretation on (the interpretation setting normally doesn't affect
graphics in any way) will decorate the corners around the wheel! How
its decorated depends on the screen width setting in astrolog.dat or
passed to -I. If this value is even, a spider web design will be put
in each corner. If this value is odd, a moire pattern will be put in
each corner. The decoration looks best when the screen width is
around 79 or 80. The higher the value, the more dense the lines will
be in the "spider webs", or the less of the screen the moire will
cover. (Don't make the moire value too low or you will cover the
entire screen, which looks cool but doesn't aid reading the chart
any! :)
***********************************
DESCRIPTION OF PC GRAPHICS FEATURES
***********************************
Astrolog's PC graphics charts look and feel and are displayed
just like the X window graphics already described. When compiling,
one has a choice between four options: (1) choose no graphics
abilities at all, (2) compile so that graphic chart bitmaps can be
generated and output to a file, (3) compile allowing file graphics in
addition to direct screen graphics in X windows, and (4) compile with
file graphics and direct graphics on the screen of a PC. The addition
of PC graphics in no way inhibits or affects the X window graphics
already in place; it's merely a matter of which compile time options
are set. Unix users don't need to look at this section.
Astrolog uses the Microsoft PC graphics library as defined in
the file graph.h included with their C7 "C" language compiler. This
file and the graphics.lib library is needed in order to be able to
compile with these graphics options set, just as the X window
libraries are needed to compile with those graphics included. If
unavailable, one can still access these PC graphics with the library
linked in, in the already compiled executable posted.
PC Astrolog is a DOS program and should be run from a DOS
prompt, outside of any Windows system. To generate a graphics chart
instead of a text one, include the -X switch just as one would do to
bring up an X window. The expected graphic chart will be displayed on
the screen unless the -Xb write bitmap to file switch is in effect.
The colors chosen for the graphics are basically identical to those
chosen in X window charts, and both of these in turn are based on the
Ansi colors used in the Ansi text charts.
Now, there are many various types of PC monitors and
resolutions. Astrolog will automatically try to determine and pick
the highest resolution mode available on your system, so this need
not be worried about.
The PC Astrolog charts may be animated in all the various ways,
and the animation will usually be flicker free! Now, PC's do have
limited memory, therefore there might not be room for more than one
page of graphics at the highest resolution. Hence, animation at the
highest (default) mode, may flicker; however, graphics at a slightly
lower resolution may take enough less memory to allow enough to do
flicker free animation. A special PC only feature for this has been
added: Pressing the 'tab' key while the PC graphics are up will try
to pick a lower resolution, where flicker free animation can be done.
Specifically, we'll toggle to a 640x350 EGA mode. On my own system,
the highest resolution I get is a 640x480 16 color VGA mode, however
the charts can't be animated without flicker. When I hit 'tab', I
drop from 480 lines of graphics to 350, but now the animation will be
perfectly smooth. The results with whatever graphics system you have
may be different.
The chart that comes up will use as many pixels as is defined by
the chart's size as specified with the -Xw and -Xs switches. The 'Q'
change chart size to square key works just as before. However, on PC
screens we will try to take in account the pixel size ratio. On EGA
screens where the pixels are long and narrow, meaning a true "square"
chart looks tall and thin, we compensate by increasing the horizontal
size of the chart. The 'B' key, which for X window graphics will
blast the current window contents to the root background, is a
meaningless feature for a PC. This key, for PC graphics systems, will
instead resize the chart to be the full size of the screen. Note
that some charts however (such as wheel charts without sidebars, -S
space charts, -Z0 sky charts, and -XG globes) are distorted unless
they are square. For these charts, the 'B' key will resize the chart
to be the largest square that will fit on the screen, i.e. will
automatically do what pressing 'B' followed by the 'Q' force to
square key would do. When the graphics mode is changed through
'tab', the chart size will also be modified to be the largest
"square" that will fit on the screen.
If the size of the chart is less than the size of the screen, it
will be displayed centered in the middle of the screen. If however
the chart size is greater than the screen size, then the chart will
take up the whole screen, and part of it will be clipped. By default
we show the upper left corner of the chart if this is the case. Now,
one can define and change which part of the chart gets shown. On PC's
the meaning of pressing the number keys have been enhanced. Normally,
number keys set the animation speed; they still do, but now only when
animation is actually being done. If not in animation, the number
keys from 1..9 will define which "quadrant" or area of the chart gets
shown. It's best to think of and use the number pad for this feature
(make sure num lock is on!) Pressing the '7' key, i.e. the upper left
number on the number pad, will set it so the default upper left part
of the chart is seen. Pressing the '3' key, on the lower right corner
of the pad, will show the lower right corner of charts larger than
the screen size. Pressing '5' will show the middle area of the chart,
with equal amounts of the chart clipped from left and right, and top
and bottom. Pressing '6' will show the right end of the chart,
vertically centered on the screen, and so on. Basically, we have a
simple implementation of something like scroll bars, allowing viewing
of all parts of the "window"! One can generate and display on the
screen even the largest charts producible with Astrolog. (Bitmap
files are still limited to, i.e. will be clipped to, a maximum size
of 728x720 pixels, however). Even on an 640x350 EGA, one can use this
to generate and view all parts of a 300% scaled relationship aspect
grid (883x883), or even a 300% scaled world map display (1082x545)!
--
Astrolog has support for the mouse and the mouse buttons when
running graphics under DOS. Upon entering a graphics chart under
DOS, a mouse pointer will appear. Holding down the left mouse button
will allow you to scribble on the screen with the mouse as a pen, in
the highlight color, just like how for Unix the left button is used
to scribble in an X window. For PC's, the middle mouse button (if you
have one - most mice such as Microsoft mice don't) will exit graphics
mode and terminate the program, like pressing the 'q' key or like how
the right mouse button does for X windows. The right mouse button
does the same thing as the middle button for X: it will reset the
current chart location to that clicked on. It won't actually display
the new longitude and latitude, but you can easily see what it is by
observing the chart information at the bottom of a graphics chart, or
by pressing the 'v' key to see the whole chart and its location in
text mode.
The ability to use the mouse to sketch and scribble on the
charts is extended for PC's. The right mouse button (on those
non-world map charts where it doesn't already set the current
location) will draw a straight line to the mouse pointer from the
point where one last clicked the left button. Also, pressing ctrl-t
will draw a rectangle from the point of the last click to the current
mouse position. Finally, pressing ctrl-x will draw an ellipse
inscribed within the bounds from the last click point to the current
position. These are just more features to make Astrolog a better
graphics drawing program. :)
Not all PC systems have mice. There is a #define in astrolog.h
called "MOUSE". If commented out, then all mouse functionality will
be compiled out, even if compiling for Unix. Note that the mouse
pointer and all PC mouse functions are temporarily disabled when
running in an animation mode. If on a PC system a mouse isn't
installed on a system and Astrolog is run with mouse features
enabled, the mouse features will be ignored as if the functionality
weren't even compiled in.
[There's a minor known bug with the PC mouse features in the
program, which is that when in a flicker free graphics mode, the
mouse pointer will only appear half the time. (You can still scribble
and set location, just that the pointer won't be visible.) This is
due to the fact that a flicker free mode is actually two pages
switched back and forth between for smooth updates. If you don't see
and want your mouse here, the update generated by pressing spacebar
will revert you to the other page where the mouse pointer is.]
--
Although Astrolog is not a Windows program and doesn't have
direct support for it with menus and all, at least not yet, Astrolog
nevertheless can be run from the Windows environment, various
features making this easier.
One can make a Program Manager icon which will run Astrolog in a
DOS box. Using the -Q0 switch here will prompt the user for whatever
switches they want to use, as well as looping back when done to allow
additional switches to be specified much like invoking the program
over and over again from DOS. Upon exiting the program, the DOS box
will also terminate, and although not as elegant as a true Windows
interface with dialog boxes and all, this is just as if not more
usable than the DOS interface.
To make a Windows Program Manager icon for Astrolog, first click
in the program group you want the icon to appear in, then choose File
New, and click OK to make a new program item. In the dialog, for the
description field type something like "Astrolog 4.10". For the
command line field, type "C:\ASTROLOG\ASTROLOG.EXE /Q0", i.e.
whatever the path name is to the executable file, and you probably
want to include the /Q0. For the working directory field, type
"C:\ASTROLOG", i.e. just the path to the directory where the astrolog
files are. For the shortcut key you can leave it blank or press a key
like 'a', meaning that pressing Ctrl-Alt-A at any time when the
Program Manager is active will start the Astrolog program.
Then click on the change icon button, OK the warning, and from
the Change Icon dialog type "C:\ASTROLOG\ASTROLOG.ICO" (again the
path to your Astrolog directory) in the filename field. This should
load in Astrolog's own Windows icon file included in the zip archive,
a yellow planet with red rings and two blue moons and stars around
it. Click OK twice and you should be back in your group with a nice
Astrolog icon that can be double clicked on to boot Astrolog whenever
you want.
You may also want to include "/V 43" or something similar along
with /Q0 for the command line field, if you want to have more than
just 25 rows in the DOS box to print the text charts in. One can also
create additional icons that have certain other switches or directly
display certain charts. For example, have another icon called
"Astrolog Now!" which has "/n /X /Q" for its switches. Double click
on this to see where the planets are right now. You can also use the
PIF editor utility (usually PIFEDIT.EXE in the Windows directory)
instead to create an astrolog.pif file. With the right system and
settings, you can specify a created .pif file instead of the Astrolog
executable directly, in the Program Manager icon, and run the program
in a window in real time along with your other Windows apps, just
like Astrolog on X windows!
--
Finally, for PC's with graphics, the actual modes the program
enters when in the "normal" and the "flicker free animation" modes
can be customized and set in astrolog.dat. The values are the various
mode numbers defined in graph.h for the Microsoft library. By
default, the normal high-res mode is set to the value "-3", which
means a mode with the highest resolution, which is usually 640x480 16
color VGA. The default low-res animation mode is set to "16", which
corresponds to 640x350 16 color EGA (which on most systems is the
highest resolution allowing multiple pages meaning animation can be
done without flicker). Here is a complete table of the legal graphics
modes, with their index values to specify them, their screen pixel
resolution, their number of colors, and any comments as to what
hardware are required for them. It is not recommended to attempt to
enter a graphics mode here that your system doesn't support.
Num. Hor. Ver. Col. Device.
-3 640 x 480, 16 ("highest resolution" up to 640x480, usually #18)
-2 320 x 200, 256 ("most colors", usually #19)
4 320 x 200, 4 (MRES)
5 320 x 200, 4 (4 grays)
6 640 x 200, 2 (CGA)
8 720 x 348, 2 (Mono Hercules)
13 320 x 200, 16 (MRES)
14 640 x 200, 16 (CGA)
15 640 x 350, 2 (Mono EGA)
16 640 x 350, 16 (EGA, maybe just 4 colors)
17 640 x 480, 2 (Mono VGA)
18 640 x 480, 16 (VGA)
19 320 x 200, 256 (MRES)
64 640 x 400, 2 (Olivetti, 1 of 16 colors)
256 640 x 400, 256 (VESA SVGA)
257 640 x 480, 256 (VESA SVGA)
258 800 x 600, 16 (NEC MultiSync 3D)
259 800 x 600, 256 (NEC MultiSync 3D)
260 1024 x 768, 16 (NEC MultiSync 4D)
261 1024 x 768, 256 (NEC MultiSync 4D)
262 1280 x 1024, 16 (NEC MultiSync 5D)
263 1280 x 1024, 256 (NEC MultiSync 5D)
**********************
COMPILING INSTRUCTIONS
**********************
Compiling Astrolog is very similar to the process of compiling
most other programs: First edit the top of the file astrolog.h,
commenting out any of the #define's which set various features that
aren't valid on your system or you don't want, and changing default
values and directories to your preference. (Just see the
self-explanatory section comments in this file.) Then in the same
manner, also edit these default parameter values in the astrolog.dat
file to your liking, at least the location and time zone values. (I
also really recommend turning on the Ansi color feature if your
system will support it - text charts look so much nicer in color!)
For Unix systems, just run the command 'make' in the directory
containing the Makefile. (You can also always compile by hand: "cc -O
-c *.c; cc -o astrolog *.o -lm -lX11" will do it; just make sure to
compile each source file and link them together at the end with the
math library, and if applicable the X11 library.)
It is possible to compile Astrolog on a VMS system, even with
its X windows functionality. There's an example of a simple VMS .COM
file in the source code distribution which can automatically compile
and link Astrolog on VMS, which should work for version 4.40,
although you might need to include "/noopt" after the CC's since some
compilers may cause the program to pass parameters incorrectly with
optimization on.
Compiling Astrolog on a PC is easy too. One can usually do it by
simply compiling each file in turn and then linking them all
together. In some cases you don't have to worry about explicitly
mentioning things like the math library if your environments are set
up properly. I used the Microsoft C7 compiler to generate the default
ready to run PC executable, but I linked with the improved
graphics.lib included with Microsoft Visual C 1.00 (C8) for the DOS
graphics features. Note that the official PC executable for this
version has also been run through the utility pklite which compressed
the file size by more than half. If you have the nmake utility, the
makefile included in the zip archive will nicely compile and link
astrolog 4.30 on a PC, with properly set options and all. I compiled
under the Large memory model, with 16K bytes of stack space. The
default directory for chart info files, the astrolog.dat file, and
the ephemeris files in the official PC executable are all set to
C:\ASTROLOG, although this location will be overridden with several
environment variables if set. The time and location defaults are set
to my own area, but you can easily override them with your own values
in the astrolog.dat file.
--
Astrolog may be compiled for DOS using the Borland Turbo C/C++
compiler, in addition to Microsoft C. Graphics support works too
using the Borland BGI graphics libraries. If you want to compile in
Borland graphics, uncomment the "#ifdef BGI" line in astrolog.h
(instead of the "#ifdef MSG" for the Microsoft graphics.lib). If you
don't want to compile in graphics, just make sure the "#ifdef PC"
line is uncommented (there are some #ifdef __TURBOC__ lines in the
sources to do non-graphical Borland specific things).
To actually compile, use the "makefile.bgi" makefile, and invoke
it with "make /f makefile.bgi" (or rename it to be just "makefile"
and run just "make"). Note that the file "makefile.cfg" is also
needed and is used during compilation by the main makefile. If you
are compiling in graphics, you will need to have object files for all
six of the BGI drivers in the directory you compile in. To make these
files, go into your BGI directory (e.g. "CD C:\BORLANDC\BGI") and do
the command "BGIOBJ /F <file>". Do this six times, where <file> is
"ATT", "CGA", "EGAVGA", "HERC", IBM8514", and finally "PC3270".
A Borland compile is fast and functionally identical to the
Microsoft compilations in nearly every respect except for the
astrolog.dat graphics mode indexes. The list of modes you can assign
to the "hi-res" and "lo-res" graphics modes as switched to via the
'tab' key don't apply to Borland compiles. For Borland graphics, there
are two options: a "hi-res" mode for whichever driver expressed using
negative values and zero, and a "lo-res" mode expressed by positive
values. Of course it's best to have the astrolog.dat graphics mode
settings set to "0" for "hi-res" and "1" for "lo-res" so Astrolog
does the expected thing and aligns with these two graphics modes
available. Note that for standard VGA, "hi-res" is a non-flicker
free 640x480 resolution, while "lo-res" is flicker free 640x350, as
with Microsoft, while the default Microsoft settings of "-3" and "16"
for the graphics mode nicely do the right thing for Borland builds too.
--
Astrolog is officially supported and runs on the Mac. The
standard ready to run Mac executable is distributed in a BinHex
4.0'ed self extracting archive. To unpack it, use a utility that can
un-BinHex such files to generate the self extracting archive, and
then double click the archive program to unpack the executable,
documentation, and other such files. I used CompactPro 1.34 to create
the Mac archive, a useful utility that can also BinHex and un-BinHex
files. The executable should run on most any 68K processor Mac, and
will run on PowerMacs in emulation mode. It requires 750K of heap to
run, with 1.5M preferred.
The Mac Astrolog executable has the same icon as the PC version,
a ringed planet with tilted red rings and surrounding stars, except
the planet body is tan (gray in four bit color mode) instead of
yellow. It and the other files are unpacked into their own "Astrolog
4.40" folder, where the folder's icon has the same ringed planet
overlaying it. When the program is actually run, you'll be prompted
to enter command switches in a terminal window. There aren't many
options available on the Mac menu bar, although you can File Quit and
copy selected text to the clipboard with it. The window doesn't have
scroll bars for when text runs off the top of the screen, but the -YQ
pager will prompt you to press return to continue scrolling if
needed, and the -os switch can be used to send all the output to a
file in your Astrolog folder. When the program terminates, the window
title will prompt you to press return one more time to exit before
the window actually goes away.
The program can read from the astrolog.dat file, and will use
the ephemeris files for very accurate calculations if -b is in
effect. These and chart info files are the same and fully compatible
with such files from PC and Unix versions. All files must however be
in the Astrolog folder for the program to find them. The -n chart for
now switch will work accurately provided the current time and zone
are set up correctly in the Control Panels. The -k Ansi text feature
does exist in Mac Astrolog, but the terminal won't be able to display
the control codes properly, so this isn't really useful unless the
output is sent to a file and later displayed in an environment that
understands the codes and can show the colored text. Mac Astrolog
doesn't yet support any interactive screen graphics. One can however
create nice graphics files using all of the programs -X graphics
switches. PostScript, Windows bitmaps, or Windows metafiles generated
may then be inserted into a program such as MS Word for the Macintosh
and viewed or printed.
Astrolog's source code can be compiled and run on the Macintosh
perfectly with no special modifications needed. In making the
official Mac executable, I used the compiler Symantec C/C++ 7.0 for
the Mac. When compiling, uncomment the new "MAC" compile time option
in astrolog.h, and turn on the "far data" flag in the compiler. Other
Astrolog compile time option settings should be SWITCHES off, ENVIRON
off, and PROTO off. :)
--
#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#
+ Walter D. "Cruiser1" Pullen ! astara@u.washington.edu +
#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#
+ "Who am I, What am I? As I am, I am not. But as we are, I AM. And to +
# you my creation, My Perfect Love is your Perfect Freedom. And I will be #
+ with you forever and ever, until the End, and then forever more." - GOD +
#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#+#